List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. ADA FOR EMBEDDED SYSTEMS

    SBC: Tartan Labs Inc            Topic: N/A

    EMBEDDED MISSION-CRITICAL SOFTWARE IS EXTREMELY SENSITIVE TO RUNTIME PERFORMANCE. THE ADA LANGUAGE IS RESPONSIVE TO THE SOFTWARE ENGINEER-ING PROBLEMS OF MISSION CRITICAL COMPUTING RESOURCE (MCCR) SYSTEMS. BUT ADA RUNTIME PACKAGES INFLUENCE AND OFTEN DETERMINE PERFORMANCE, RELIABILITY, FLEXIBILITY, AND RECONFIGURABILITY OF AN EMBEDDED APPLICATION. THIS RESEARCH WILL DEFINE A RUNTIME WHICH SUPPORTS ...

    SBIR Phase I 1987 Department of DefenseAir Force
  2. ALTERNATIVE FLIGHT TEST LAUNCHER EVALUATION

    SBC: Astro Innovations Inc            Topic: N/A

    THE PROPOSED STUDY WILL CRITICALLY EVALUATE SIX OR MORE INNOVATIVE CONCEPTS FOR LAUNCHING FLIGHT TEST PAYLOADS TO KWAJELEIN ATOLL, WITH EMPHASIS ON COST EFFECTIVENESS, PARTICULARLY FOR SMALL PAYLOADS (UNDER 50 LBS). CANDIDATE CONCEPTS WILL BE COMPARED FOR PERFORMANCE OVER THE FULL SPECTRUM OF ANTICIPATED PAYLOAD WEIGHTS AND FULL FLIGHT TEST ENVIRONMENT ENVELOPE. EVALUATION OF PAYLOAD LAUNCH ENVIRO ...

    SBIR Phase I 1987 Department of DefenseAir Force
  3. ANALYSIS OF THE PROPERTIES OF SOLID PROPELLANTS

    SBC: Materials Sciences LLC            Topic: N/A

    THE OBJECT OF THIS PHASE I STUDY IS TO ESTABLISH THE FEASIBILITY OF MODELING SOLID PROPELLANTS, CONSISTING OF ENERGETIC BINDERS CONTAININGVARIOUS FILLER MATERIALS, AS PARTICULATE COMPOSITES AND USING EXISTING METHODS FOR COMPOSITE PROPERTY ANALYSIS. INTERACTIONS OF CONSTITUENTS WILL BE STUDIED TO OBTAIN RELATIONS BETWEEN PHYSICAL PROPERTIES OF THE PROPELLANTS AND THE PROPERTIES AND GEOMETRY OF THE ...

    SBIR Phase I 1987 Department of DefenseAir Force
  4. ANGULAR WEAVING FOR TURBINE ENGINE COMPOSITE COMPONENTS

    SBC: Textile Technologies Inc            Topic: N/A

    ADVANCED AIRCRAFT ENGINES REQUIRE ADVANCED MATERIALS TO MEET THEIR GOALS OF PERFORMANCE, THRUST-TO-WEIGHT RATIO AND FUEL EFFICIENCY. OF ALL THE TECHNIQUES AVAILABLE FOR FABRICATING COMPOSITE REINFORCEMENT MATERIALS, NOT ONE TECHNIQUE CAN PROVIDE THE VERSATILITY TO FEASIBLY PRODUCE RELIABLE MULTIDIRECTIONAL STRUCTURAL COMPONENTS. THEMAJOR OBJECTIVE OF THIS PROPOSAL IS TO ADVANCE THE LEVEL OF MATERI ...

    SBIR Phase I 1987 Department of DefenseAir Force
  5. BI-METALLIC SELF-FORGING FRAGMENT (SFF) WARHEAD FOR ENHANCED BEHIND-ARMOR EFFECTS

    SBC: Dyna East Corp.            Topic: N/A

    THE LETHALITY OF ANY DIRECTED-ENERGY WARHEAD IS MEASURED BY ITS ABILITY TO CAUSE IRREPARABLE DAMAGE TO THE VULNERABLE COMPONENTS THAT EXIST BEHIND THE PROTECTIVE ARMOR. THIS DAMAGE IS INCURRED BY THE IMPACT OF THESE COMPONENTS BY EITHER THE PENETRATOR MATERIAL ITSELF OR BY TARGET SPALL MATERIAL GENERATED BY THE INTERACTION OF THE PENETRATOR AND PROTECTIVE ARMOR. SIGNIFICANT IMPROVEMENT IN LETHALIT ...

    SBIR Phase II 1987 Department of DefenseAir Force
  6. COMPOSITE MATERIALS FOR MANIKIN SKELETAL COMPONENTS KP 358-86

    SBC: Ketron Inc            Topic: N/A

    MANIKINS USED IN CRASH/IMPACT TESTS AND IN THE TESTING OF ESCAPE SYSTEMS AND RESTRAINT DEVICES REQUIRE STRUCTURAL STRENGTH ADEQUATE TO REPEATEDLY WITHSTAND THE HIGH LOADS IMPOSED UPON THEM BY VARIOUS DYNAMIC TEST CONDITIONS. THE USE OF METAL-BONDED SKELETONS TO ACHIEVE THE REQUISITE STRENGTH SIGNIFICANTLY INCREASES THE DIFFICULTY OF PROVIDING THE MASS DISTRIBUTION AND LOAD DEFORMATION CHARACTERIST ...

    SBIR Phase I 1987 Department of DefenseAir Force
  7. COST IMPROVEMENT FABRICATION METHODS FOR RADAR T/R MODULES

    SBC: Ttl Techniques            Topic: N/A

    AN INNOVATIVE MICROWAVE PACKAGING TECHNOLOGY IS PROPOSED. THIS PACKAGING PROVIDES COST EFFECTIVE PRODUCTION AND TESTING. IMPROVED ELECTRICAL CHARACTERISTICS, MECHANICAL DURABILITY OVER CONVENTIONAL PACKAGING WILL BE PROVIDED. IN THIS PROJECT SEVERAL EMERGING TECHNOLOGIES ARE UTILIZED. MICROELECTRONIC HYBRID FABRICATION TECHNIQUE IS EMPLOYED. LOW PRESSURE PLASMA TORCH TECHNOLOGY WILL BE USED FOR DE ...

    SBIR Phase I 1987 Department of DefenseAir Force
  8. DEEP BASE HEAT REJECTION METHODS

    SBC: THERMACORE, INC.            Topic: N/A

    THE ICBM DEEP BASE PROGRAM WILL EQUIP AN UNDERGROUND FACILITY WITH ALL OF THE LIFE SUPPORT EQUIPMENT NECESSARY FOR HUMAN SURVIVAL DURING THE POST-ATTACK PHASE OF A NUCLEAR WAR. THESE SYSTEMS WILL INCLUDE POWER GENERATION, CO2 REMOVAL ETC., AND THE HEAT GENERATED BY OPERATING THESE SYSTEMS MUST BE DISSIPATED TO THE SURROUNDING ROCK STRATA TO KEEP THE UNDERGROUND HABITAT AT AN COMFORTABLE TEMPERATUR ...

    SBIR Phase I 1987 Department of DefenseAir Force
  9. DIAGNOSTIC RULES GENERATOR

    SBC: AMERIGENICS, INC.            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseAir Force
  10. DIGITAL IMAGE ANALYSIS SYSTEM FOR MONITORING CRACK-GROWTH AT ELEVATED TEMPERATURE

    SBC: Strainoptic Technologies, Inc.            Topic: N/A

    THE OBJECTIVE OF THE PROPOSED RESEARCH IS TO DEVELOP A NEW APPROACH TO THE PROBLEM OF LOCATING THE TIP OF A CRACK AND MEASURING ITS GROWTH. THE PROPOSED SYSTEM SHOULD BE CAPABLE OF PERFORMING THIS TASK AUTOMATICALLY, AT ROOM OR AT ELEVATED TEMPERATURE, WHILE THE SPECIMEN IS SUBJECTED TO FATIGUE CYCLING IN AN OVEN. THE PROPOSED SYSTEM WILL CONSIST OF A PROBE, IMAGING THE CRACK TIP ON A FIBEROPTIC I ...

    SBIR Phase I 1987 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government