You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. REMOVAL OF AUTOMOTIVE POLLUTANTS USING NEW METAL-SUPPORTED METAL CATALYST

    SBC: Accel Catalysis Inc.            Topic: N/A

    A NEW TECHNIQUE IS PROPOSED FOR THE PREPARATION OF METAL-SUPPORTED METAL (MSM) CATALYSTS. THE KEY FEATURE OF THIS TECHNIQUE INVOLVES THE PREPARATION OF A THIN LAYER OF POROUS METAL ON TOP OF A METAL SUBSTRATE SUCH THAT THE POROUS METAL SURFACE IS AN INTEGRAL PART OF THE METAL SUPPORT. SUBSEQUENT INTEGRATION OF PT AND RH ON THE POROUS METAL SURFACE WILL PRODUCE THE MSM CATALYST. THIS CATALYST IS US ...

    SBIR Phase I 1993 Environmental Protection Agency
  2. NOVEL CATALYSTS FOR THE OXIDATION OF NO TO NO2

    SBC: Accel Catalysis Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Environmental Protection Agency
  3. Manufacturing Methods for Sulfur Concrete Sewer Pipe

    SBC: Brimstone Pipe Company            Topic: N/A

    This Phase I research is intended to evaluate the feasibility of manufacturing low-cost, acid-resistant sanitary sewer pipe from sulfur concrete. Sulfur is an abundant mineral recovered from coking, natural gas processing, and petroleum refining. Secondary recovery of sulfur, resulting from environmental regulation, produces more material than is needed by U.S. industry. The U.S. Bureau of Mines ...

    SBIR Phase I 1997 Environmental Protection Agency
  4. Manufacturing Methods for Sulfur Concrete Sewer Pipe

    SBC: Brimstone Pipe Company            Topic: N/A

    This Phase I research is intended to evaluate the feasibility of manufacturing low-cost, acid-resistant sanitary sewer pipe from sulfur concrete. Sulfur is an abundant mineral recovered from coking, natural gas processing, and petroleum refining. Secondary recovery of sulfur, resulting from environmental regulation, produces more material than is needed by U.S. industry. The U.S. Bureau of Mines ...

    SBIR Phase II 1998 Environmental Protection Agency
  5. Sensor for Monitoring of Particulate Emissions in Diesel Exhaust Gases

    SBC: Active Spectrum, Inc.            Topic: N/A

    Active Spectrum, Inc. proposes a novel, low-cost soot sensor for on-board measurement of soot emissions in diesel exhaust gases. The proposed technology is differentiated from existing method by excellent sensitivity, high specificity to carbon particulates, and robustness to fouling by accumulated soot. Potential commercial applications of the real-time sensor include diesel emissions reduction ...

    SBIR Phase I 2009 Environmental Protection Agency
  6. Precision Cleaning/Sub-Micron Level Cleaning with Liquid/Supercritical Carbon Dioxide (CO2) Technology

    SBC: GT Equipment Technologies, Inc.            Topic: N/A

    Not Available Q-Peak, Inc. proposes to develop a broadly tunable, 10-W-average-power IR source suitable for use as a DIAL system transmitter and based on the combination of a Nd-doped pulsed pump laser and optical parametric oscillators (OPO). The laser source, a compact, diode-pumped, 5-10 kHz pulse-repetition-rate, Q-switched Nd:YLF laser, will pump a tandem OPO system consisting of an angle-tu ...

    SBIR Phase I 1999 Environmental Protection Agency
  7. A Novel Treatment Method of Drinking Water

    SBC: Ion Physics Corporation            Topic: N/A

    Pulsed electric field (PEF) disinfection is becoming well known as a possible means for the control of microorganisms in fluids. Although this technique has been shown to be effective against a wide variety of microorganisms, its widespread application is impeded by the high specific energy input (kWh/L) required. Conversely, the proposed enhanced PEF process promises a significant reduction in th ...

    SBIR Phase I 2001 Environmental Protection Agency
  8. Series Resistance Reduction in Tunable Radio Frequency (RF) Capacitors

    SBC: PARATEK MICROWAVE, INC.            Topic: DMEA092001

    By attention to lattice parameter matching, thermal expansion coefficient mismatch reduction and composition of conducting epitaxial detemined.

    SBIR Phase I 2009 Department of DefenseDefense Microelectronics Activity
  9. Low-Cost Machining Without Cutting Fluids

    SBC: CREARE LLC            Topic: N/A

    Cutting fluids have been used in machining processes for many years to decrease the temperature during machining by spraying the coolant into the machining zone, directly on the cutting tool and the part. This has the effect of decreasing the tool temperature, which increases tool life and improves the part quality. These benefits come with significant drawbacks. Cutting fluids are environmenta ...

    SBIR Phase I 2002 Environmental Protection Agency
  10. Low-Cost Machining Without Cutting Fluids

    SBC: CREARE LLC            Topic: N/A

    Cutting fluids have been used in machining processes for many years to decrease the temperature during machining by spraying the coolant into the machining zone, directly on the cutting tool and the part. This has the effect of decreasing the tool temperature, which increases tool life and improves the part quality. These benefits come with significant drawbacks. Cutting fluids are environmenta ...

    SBIR Phase II 2003 Environmental Protection Agency
US Flag An Official Website of the United States Government