Award Data

Fresh water cyanobacteria harmful algal blooms (HAB), have potentially many adverse environmental impacts. For instance, bloom mats of filamentous algae are believed to reduce ambient light levels below those required for submerged aquatic vegetation to survive. Blue-green algae, form blooms that make a surface scum and have been associated with low levels of dissolved oxygen that can be lethal ...

This Phase I research is intended to evaluate the feasibility of manufacturing low-cost, acid-resistant sanitary sewer pipe from sulfur concrete. Sulfur is an abundant mineral recovered from coking, natural gas processing, and petroleum refining. Secondary recovery of sulfur, resulting from environmental regulation, produces more material than is needed by U.S. industry. The U.S. Bureau of Mines ...

Gasification provides a potential means of deriving clean energy from biomass waste materials. One of the greatest obstacles to the effective gasification of animal and farm waste is the slagging behavior of the residual ash at temperatures that yield the most efficient gasification performance. Many wastes are particularly problematic for dry ash gasification processes, especially waste from co ...

Major improvements in process control, compliance monitoring, and environmental decisionmaking could be made if more accurate, less costly, more rugged techniques were available for continuous monitoring of multiple gas phase pollutants. As part of the solution, Fourier Transform Infrared (FT-IR) spectroscopy is emerging as a promising Field Analytical Method (FAM) for multiple gas monitoring. H ...

Infrared tunable diode laser spectrometers provide a highly effective means of measuring trace concentrations, with either remote sensing or with advective sampling. It is often desirable to measure more than one trace gas at a time. This is especially true when gas emissions are strongly correlated, such as in combustion emissions where measuring both the CO2 concentration and another minor con ...

Acrolein (CH2=CHCHO) has been identified by the U.S. Clean Air Act as a hazardous air pollutant because of its adverse health effect, particularly on respiratory systems. There are both anthropogenic and natural sources of acrolein in the environment. Acrolein is produced by combustion sources (e.g. vehicle exhaust, prescribed agricultural burning, cigarette smoke) and industrial sources, includi ...

The use of enzyme-linked immunosorbent assay (ELISA) to detect contaminants such as solvents, fuels, and pesticides in soil and water samples is now well established. Although ELISA and related methods can facilitate analysis of samples, several washing and separation steps are involved that require 30 to 120 minutes per sample to reach equilibrium. Recently, near infrared fluorescence immunoassa ...

Polymer composites are widely used for automotive body panels to save weight, increase fuel efficiency, and eliminate corrosion. However, unlike metals, structural polymers are not electrically conductive; thus, they are not amenable to the industry standard technique of electrostatic spray painting (ESP). Current methods for adapting polymers to ESP pose serious environmental and economic chall ...

Baldwin Environmental Inc. (BEI) successfully completed an SBIR Phase I project that demonstrated the feasibility of designing and producing a Fine and Coarse Particulate Monitoring System (FCPMCEMS). This system simultaneously measures and reports mass concentrations of fine and coarse particulate material using Atmospheric Dispersion Simulation and Beta Attenuation Monitoring (BAM). A design a ...

N/A