You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. PROCESSING GRAPHITE WITH PEEK USING A THERMOPLSTIC WELDING HEAD AND THE ROBOTIC WINDING SYSTEM (ROWS)

    SBC: ADC Acquisition Co. dba Automated Dynamics            Topic: N/A

    IT HAS BEEN RECOGNIZED BY THIS FIRM THAT FIBER REINFORCED THERMOPLASTIC COMPOSITES MATERIALS OFFER COST AND PERFORMANCE ADVANTAGES COMPARED TO CONVENTIONAL THERMOSETTING MATERIALS. THE INDUSTRY IS GOING TO BE FACED WITH SEARCHING FOR THREE DIMENSIONAL FABRICATION TECHNIQUES THAT ARE AUTOMATED AND USE ADVANCED CONCEPTS IN CAD/CAM. THIS PROPOSAL DESCRIBES AN EFFORT TO USE AVAILABLE PRE-PREG MATERIAL ...

    SBIR Phase II 1989 Department of DefenseArmy
  2. Automated Fiber Placement (AFP) Process for Polymer Composite Sabots

    SBC: ADC Acquisition Co. dba Automated Dynamics            Topic: N/A

    Automated Cynamics Corporations (ADC) proposes to exploit its knowledge of automated in-situ consolidation of thermoplastic carbon fiber unidirectional tape to reduce the high scrap rate currently experienced in the in the fabrication of thermoset (epoxy) carbon fiber sabots. The current production process requires several steps which result in material loss (scrap) of approximately 60-70%. App ...

    SBIR Phase II 1998 Department of DefenseArmy
  3. MULTI-ROTORCRAFT MULTI-THREAT AIR-TO-GROUND ENGAGEMENT SIMULATION

    SBC: ANALYSIS & SIMULATION, INC.            Topic: N/A

    THE NEED EXISTS FOR A SIMULATION CAPABLE OF EVALUATING THE BENEFITS OF EMERGING ROTORCRAFT TECHNOLOGIES IN THE CONTEXT OF MULTI-ROTORCRAFT, MULTI-THREAT AIR-TO-GROUND COMBAT ENGAGEMENT. THE OBJECTIVE OF THE PHASE I EFFORT IS TO DEMONSTRATE THE FEASIBILITY OF INNOVATIVE ANALYTICAL/PROGRAMMING TECHNIQUES TO MEET THIS NEED AND TO PROVIDE A FIRM BASIS AND DIRECTION FOR FORMULATION OF A PHASE II DEVELO ...

    SBIR Phase II 1989 Department of DefenseArmy
  4. DAXIS--Data Analysis if X-Ray Image System-Phase II

    SBC: ANALYSIS & SIMULATION, INC.            Topic: N/A

    Analysis and Simulation, Inc. (AnSim) proposes to develop a Data Analysis of X-Ray Image System (DAXIS) software package. The software will analyze the digital data obtained from X-ray images using three analytical filters: wavelets, fractals, and artificial neural networks (ANN). Wavelet analysis will be used for (1) noise reduction, (2) determination of edges and curvatures, and (3) gray-scal ...

    SBIR Phase II 1998 Department of DefenseArmy
  5. NBC PROTECTIVE MASK BLOWER

    SBC: Amnis Corporation            Topic: N/A

    THERE IS A NEED FOR A MINIATURE BLOWER TO BE USED TO REDUCE THERMAL STRESS, PROTECT RESPIRATION AND INHIBIT FOGGING IN NUCLEAR, BIOLOGICAL, CHEMICAL (NBC) PROTECTIVE MASKS. AN OPTIMALLY SMALL AND LIGHT BLOWER COMPATIBLE WITH DELIVERY REQUIREMENTS IS DESIRABLE. TO MINIMIZE BATTERY WEIGHT, MAXIMUM EFFICIENCY OF THE BLOWER AND THE MOTOR IS REQUIRED. SOME EXISTING BLOWERS CAN MEET THE SIZE AND FLOW RE ...

    SBIR Phase II 1989 Department of DefenseArmy
  6. A HIGH RANGE PARTICLE VELOCITY TRANSDUCER DEVELOPMENT

    SBC: Applied Research Associates, Inc.            Topic: N/A

    THERE IS AN ESTABLISHED NEED FOR A SIMPLE ROBUST TRANSDUCER TO MEASURE PARTICLE VELOCITY IN SEVERE BLAST AND SHOCK ENVIRONMENTS SUCH AS NUCLEAR AND HIGH EXPLOSIVE TESTS. A GAGE CONCEPT IS PROPOSED FOR DEVELOPMENT, BASED ON THE PROVEN MEASUREMENT PRINCIPLES USED IN THE HIGHLY SUCCESSFUL DX GAGE, BUT RECONFIGURED MECHANICALLY AND ELECTRICALLY TO WITHSTAND THE HARSH SHOCK ENVIRONMENTS. THE CONCEPT RE ...

    SBIR Phase II 1989 Department of DefenseDefense Threat Reduction Agency
  7. DEVELOPMENT OF A HIGH DYNAMIC RANGE DOWNHOLE SIGNAL CONDITIONING MODULE

    SBC: Applied Research Associates, Inc.            Topic: N/A

    HIGH RANGE (200,000 G) ACCELEROMETERS ARE THE ONLY TRANSDUCERS THAT PROVIDE THE REQUIRED LONG-TERM DATA IN THE ENVIRONMENTS OF INTEREST TO THE BLAST AND SHOCK COMMUNITY. THESE GAGES HAVE A VERY LARGE DYNAMIC RANGE AND NOISE OFTEN MASKS THE LATE TIME (BUT EXTREMELY IMPORTANT) DATA. WE PROPOSE TO DEVELOP A CLOSE COUPLED LOGARITHMIC GAIN SIGNAL CONDITIONING SYSTEM THAT WILL CORRECT THE LATE TIME NOIS ...

    SBIR Phase II 1989 Department of DefenseDefense Threat Reduction Agency
  8. TARGET PREDICTION ALGORITHMS AND IMPLEMENTATION

    SBC: A-TECH CORPORATION            Topic: N/A

    THE INTENT OF THIS WORK IS TO DEVELOP AN ADVANCED ESTIMATED ALGORITHM FOR MANEUVERING TARGET STATE ESTIMATION AND PREDICTION FOR FIRE CONTROL AND TO DEVELOP A DESIGN OF A VHSIC SYSTOLIC ARRAY FOR IMPLEMENTATION OF THE ALGORITHM. THE DESIGN OF THE ALGORITHM WILL CONSIDER MANEUVERING TARGETS INCLUDING AIRCRAFT AND HELICOPTERS. IT WILL INCLUDE THE USE OF ADVANCED SENSOR INFORMATION SUCH AS AN IMAGERY ...

    SBIR Phase II 1989 Department of DefenseArmy
  9. Heavy Metal Ion Removal and Wastewater Treatment by Influence of Magnetic and Electrical Fields

    SBC: BELTRAN, INC.            Topic: N/A

    A number of arsenals and depots such as Toby Hann Army Depot, PA, and Corpus Christy Army Depot, employ electroplating technology which generates chrome, nickel and cadmium metal ions requiring removal from the wastewater. A cost-effective method is needed for removal of heavy metal ions from small plating operations. DoD grant applications are sought for the development of innovative processes fo ...

    SBIR Phase II 1998 Department of DefenseArmy
  10. NEW METHODS OF CONSTRUCTING SCALE MODEL ARMOR UNITS

    SBC: Exterior Walls Systems Ltd.            Topic: N/A

    SCALE MODEL ARMOR UNITS OF SPECIFIED SIZE, SHAPE, AND DENSITY ARE NEEDED FOR USE IN COASTAL MODEL INVESTIGATION OF BREAKWATER STABILITY. THE TECHNICAL REPORTS INDICATE THAT THE MODELS USED IN PREVIOUS TESTS MADE USING A SULFER COMPOUND HAD A LOW-BREAK STRENGTH. THE AIM OF THIS RESEARCH IS TO DEVELOP MODELS IN EITHER PLASTIC, AND/OR "SUPER" CONCRETE IN A COST-EFFECTIVE, SAFE MANNER, THAT MEET THE S ...

    SBIR Phase II 1988 Department of DefenseArmy
US Flag An Official Website of the United States Government