You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Intelligent, Adaptive Research and Training Platform for Individual and Team Training, with Web Capabilities and Applications

    SBC: 21ST CENTURY SYSTEMS, INC.            Topic: N/A

    In an information-rich environment, the possibility of enhancing the decision-making processes and outcomes is closely tied to the proper and timely management and analysis of information. In a team decision making environment coopertion, communication, collaboration, shared situational awareness and mental models become critical parameters for success. Computer technology, hardware and software ...

    SBIR Phase II 1998 Department of DefenseAir Force
  2. PROCESSING GRAPHITE WITH PEEK USING A THERMOPLSTIC WELDING HEAD AND THE ROBOTIC WINDING SYSTEM (ROWS)

    SBC: ADC Acquisition Co. dba Automated Dynamics            Topic: N/A

    IT HAS BEEN RECOGNIZED BY THIS FIRM THAT FIBER REINFORCED THERMOPLASTIC COMPOSITES MATERIALS OFFER COST AND PERFORMANCE ADVANTAGES COMPARED TO CONVENTIONAL THERMOSETTING MATERIALS. THE INDUSTRY IS GOING TO BE FACED WITH SEARCHING FOR THREE DIMENSIONAL FABRICATION TECHNIQUES THAT ARE AUTOMATED AND USE ADVANCED CONCEPTS IN CAD/CAM. THIS PROPOSAL DESCRIBES AN EFFORT TO USE AVAILABLE PRE-PREG MATERIAL ...

    SBIR Phase II 1989 Department of DefenseArmy
  3. Automated Fiber Placement (AFP) Process for Polymer Composite Sabots

    SBC: ADC Acquisition Co. dba Automated Dynamics            Topic: N/A

    Automated Cynamics Corporations (ADC) proposes to exploit its knowledge of automated in-situ consolidation of thermoplastic carbon fiber unidirectional tape to reduce the high scrap rate currently experienced in the in the fabrication of thermoset (epoxy) carbon fiber sabots. The current production process requires several steps which result in material loss (scrap) of approximately 60-70%. App ...

    SBIR Phase II 1998 Department of DefenseArmy
  4. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase II 1998 Department of DefenseNavy
  5. SYNTHESIS OF ULTRAHIGH PURITY SUBMICRON BORON CARBIDE POWDERS

    SBC: ADVANCED REFRACTORY TECHNOLOGIES, INC.            Topic: N/A

    MATERIALS FOR SPACECRAFT STRUCTURES ARE REQUIRED WHICH POSSESS HIGH STIFFNESS TO WEIGHT RATIOS, ALONG WITH CHEMICAL AND DIMENSIONAL STABILITY IN SPACE ENVIRONMENTS. B(4)C HAS ONE OF THE HIGHEST RATIOS AND CAN BE FABRICATED INTO DENSE BODIES. OPTIMAL COMPOMENT PERFORMANCE WILL LIKELY REQUIRED AN IMPROVED B(4)C POWDER WHICH IS NOT AVAILABLE COMMERCIALLY NOW. A PROPRIETARY HIGH TEMPERATURE REACTOR HA ...

    SBIR Phase II 1988 Department of DefenseMissile Defense Agency
  6. Diamond-Like Nanocomposites (DLN) as a Protective, Wear Resistant Thin Film for'Sliding Electrical Contacts.

    SBC: ADVANCED REFRACTORY TECHNOLOGIES, INC.            Topic: N/A

    A novel coating technology is proposed for increased wear and improved li fe and reliability of commutator bars in electrical sliding devices found in manned and unmanned underwater vehlilles. Diamond-Like Nanocomposite (DLN) coatings represent a famil Of thiWrfilms that bxhibit unique combinations of technologically interesting properties including high adhesion to virtually any substrate (inclu ...

    SBIR Phase II 1998 Department of DefenseNavy
  7. COMPACT HIGH POWER LASERS FOR MODERN DEFENSE APPLICATIONS

    SBC: Advec Corp.            Topic: N/A

    THE DEVELOPMENT OF COMPACT, HIGH ENERGY DENSITY, HIGH POWER (AND POTENTIALLY C.W.) LASER SYSTEMS CAPABLE OF PROPAGATING THROUGH BOTH AIR AND WATER COULD PAVE THE WAY FOR NEXT GENERATION TACTICAL NAVAL SYSTEMS. APPLICATIONS IN OTHER DEFENSE AREAS AS WELL AS A HOST OF COMMERCIAL APPLICATIONS ARE ALSO POSSIBLE WITH THESE TYPES OF SYSTEMS. WE PROPOSE TO PROVIDE A DETAILED PLAN AND DESIGN OF SPECIFIC E ...

    SBIR Phase II 1989 Department of DefenseNavy
  8. MULTI-ROTORCRAFT MULTI-THREAT AIR-TO-GROUND ENGAGEMENT SIMULATION

    SBC: ANALYSIS & SIMULATION, INC.            Topic: N/A

    THE NEED EXISTS FOR A SIMULATION CAPABLE OF EVALUATING THE BENEFITS OF EMERGING ROTORCRAFT TECHNOLOGIES IN THE CONTEXT OF MULTI-ROTORCRAFT, MULTI-THREAT AIR-TO-GROUND COMBAT ENGAGEMENT. THE OBJECTIVE OF THE PHASE I EFFORT IS TO DEMONSTRATE THE FEASIBILITY OF INNOVATIVE ANALYTICAL/PROGRAMMING TECHNIQUES TO MEET THIS NEED AND TO PROVIDE A FIRM BASIS AND DIRECTION FOR FORMULATION OF A PHASE II DEVELO ...

    SBIR Phase II 1989 Department of DefenseArmy
  9. DAXIS--Data Analysis if X-Ray Image System-Phase II

    SBC: ANALYSIS & SIMULATION, INC.            Topic: N/A

    Analysis and Simulation, Inc. (AnSim) proposes to develop a Data Analysis of X-Ray Image System (DAXIS) software package. The software will analyze the digital data obtained from X-ray images using three analytical filters: wavelets, fractals, and artificial neural networks (ANN). Wavelet analysis will be used for (1) noise reduction, (2) determination of edges and curvatures, and (3) gray-scal ...

    SBIR Phase II 1998 Department of DefenseArmy
  10. IR/EO TARGET GENERATION CONCEPTS

    SBC: AMHERST SYSTEMS, INC.            Topic: N/A

    MAJOR IMPROVEMENTS ARE REQUIRED IN SIMULATION TEST SYSTEMS IN ORDER TO TEST INTEGRATED SENSOR SYSTEMS THAT COMBINE RF, INFRARED AND ELECTRO-OPTICAL SENSORS. RF ENVIRONMENT SIMULATORS CAN NOW GENERATE EMISSIONS ASSOCIATED WITH MAJOR COMBAT SCENARIOS. NO EQUIVALENT CAPABILITY EXISTS TO GENERATE LARGE NUMBERS OF IR AND EO TARGET SIGNATURES SO THAT IR AND EO SENSORS CAN BE TESTED IN THESE SAME SCENARI ...

    SBIR Phase II 1988 Department of DefenseAir Force
US Flag An Official Website of the United States Government