Award Data

Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

THE ABILITY TO FABRICATE CERAMIC ARMOR ECONOMICALLY IS DEPENDENT UPON SEVERAL FACTORS INCLUDING POWDER COST, FABRICATION TECHNIQUE, AND FINAL MACHINE COST. CANDIDATE CERAMIC SUCH AS TIB (2), AND B (4)C DO NOT SINTER TO FULL DENSITY. THEREFORE, NEAR-NET SHAPE FORMATION IS DIFFICULT AND EXPENSIVE, ESPECIALLY WHERE COMPLEX GEOMETRIES ARE INVOLVED. ART PROPOSES TO UTILIZE NEW POWDER SYNTHESIS TECHNOLO ...

A novel coating technology is proposed for increased wear and improved li fe and reliability of commutator bars in electrical sliding devices found in manned and unmanned underwater vehlilles. Diamond-Like Nanocomposite (DLN) coatings represent a famil Of thiWrfilms that bxhibit unique combinations of technologically interesting properties including high adhesion to virtually any substrate (inclu ...

"Under Phase I array-processing techniques were developed andanalyzed which provided an effective interference rejectioncapability for acoustic intercept systems. This was demonstratedvia computer analysis and simulation of these techniques asapplied to a volumetric acoustic intercept sensor. It was shownthat, using such an array, an adaptive spatial normalizationtechnique could be used to suppr ...

THE DEVELOPMENT OF COMPACT, HIGH ENERGY DENSITY, HIGH POWER (AND POTENTIALLY C.W.) LASER SYSTEMS CAPABLE OF PROPAGATING THROUGH BOTH AIR AND WATER COULD PAVE THE WAY FOR NEXT GENERATION TACTICAL NAVAL SYSTEMS. APPLICATIONS IN OTHER DEFENSE AREAS AS WELL AS A HOST OF COMMERCIAL APPLICATIONS ARE ALSO POSSIBLE WITH THESE TYPES OF SYSTEMS. WE PROPOSE TO PROVIDE A DETAILED PLAN AND DESIGN OF SPECIFIC E ...

DEFINITION OF THE STRUCTURE-MEDIA INTERACTION (SMI) LOADS ON A BURIED STRUCTURE IS ONE OF THE LARGEST SOURCES OF UNCERTAINTY IN ANALYZING THE SURVIVABILITY OF STRATEGIC STRUCTURES. ADVANCEMENT OF THE STATEOF-THE-ART IN THE MODELING OF SMI BEHAVIOR IS HAMPERED BY A LIMITED DATA BASE WHICH IS CONFINED TO OVERPRESSURES MUCH SMALLER THAN THOSE CURRENTLY OF INTEREST. THIS EFFORT PROPOSES TO DEVELOP AND ...

THERE IS AN ESTABLISHED NEED FOR A SIMPLE ROBUST TRANSDUCER TO MEASURE PARTICLE VELOCITY IN SEVERE BLAST AND SHOCK ENVIRONMENTS SUCH AS NUCLEAR AND HIGH EXPLOSIVE TESTS. A GAGE CONCEPT IS PROPOSED FOR DEVELOPMENT, BASED ON THE PROVEN MEASUREMENT PRINCIPLES USED IN THE HIGHLY SUCCESSFUL DX GAGE, BUT RECONFIGURED MECHANICALLY AND ELECTRICALLY TO WITHSTAND THE HARSH SHOCK ENVIRONMENTS. THE CONCEPT RE ...

HIGH RANGE (200,000 G) ACCELEROMETERS ARE THE ONLY TRANSDUCERS THAT PROVIDE THE REQUIRED LONG-TERM DATA IN THE ENVIRONMENTS OF INTEREST TO THE BLAST AND SHOCK COMMUNITY. THESE GAGES HAVE A VERY LARGE DYNAMIC RANGE AND NOISE OFTEN MASKS THE LATE TIME (BUT EXTREMELY IMPORTANT) DATA. WE PROPOSE TO DEVELOP A CLOSE COUPLED LOGARITHMIC GAIN SIGNAL CONDITIONING SYSTEM THAT WILL CORRECT THE LATE TIME NOIS ...

THE PURPOSE OF THIS DEVELOPMENT PROPOSAL IS TO DEMONSTRATE HIGH SPEED RANGING AND CLASSIFICATION OF OBJECTS WITH A VERSION OF A&F'S PROPRIETARY 3D VISION SYSTEM. THIS SYSTEM HAS ALREADY DEMONSTRATED TARGET CLASSIFICATION AND RANGING IN REALISTIC ENVIRONMENTS IN WORK SUPPORTED BY NSWC. THE EMPHASIS OF THIS PROJECT IS TO INCREASE THE SPEED OF THE SYSTEM FROM IT'S PRESENT LEVEL.

CONAX HAS EXTENDED THE EXPERIENCE GAINED IN 14 YEARS OF ENGINEERING AND MANUFACTURING ELECTRICAL PENETRATORS TO SEALING DEVICES FOR FIBER OPTICS. FIBER OPTIC PENETRATORS WITH A TOTAL OPTICAL LOSS OF 0.3 DB AT 10,000 PSI HAVE BEEN DEMONSTRATED. AN INNOVATIVE USE OF COMPRESSIVE SEALING IS PROPOSED TO DEVELOP A PENETRATOR FOR SINGLE MODE FIBER WHICH IS MORE RUGGED AND HAS A WIDER OPERATING TEMPERATUR ...