You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Acoustic Intercept Receiver for Naval Special Warfare Undersea Vehicles

    SBC: Advanced Acoustic Concepts, Inc.            Topic: N09T012

    The current generation of high-frequency active 3-D acoustic imaging systems presents a challenge to the covert use of Underwater Vehicles (UVs) by Special Forces teams. An acoustic intercept capability is needed to detect active signals before the UV is detected, so that it can vector away from the source. The team of Advanced Acoustic Concepts and Montana State University propose to design and p ...

    STTR Phase I 2009 Department of DefenseNavy
  2. High Speed Compact Vaneaxial Fans

    SBC: ADVANCED ENERGY CONVERSION, LLC            Topic: OSD08E12

    We believe the following improvements are possible in vaneaxial fans: efficiency through improved fan blade design, coupled with the freedom to operate at speeds substantially higher than 3600rpm; reduced size by operating the fan at higher speed allows s

    SBIR Phase I 2009 Department of DefenseNavy
  3. Closed-Loop Fabrication of Free-Form Optics

    SBC: APPLIED SCIENCE INNOVATIONS, INC            Topic: N07181

    To meet the need of the Navy in fabrication and measurement of conformal windows such as toroidal to precise optical tolerances from ceramic materials, Applied Science Innovations (ASI) proposes Phase II development of the Closed-Loop Fabrication of Free-Form Optics (CLF3O), building directly on ASI''s successful Phase I feasibility studies. The proposed CLF3O system is a modular attachment for in ...

    SBIR Phase II 2009 Department of DefenseNavy
  4. Dynamic Modeling of Safe Routes

    SBC: APPLIED VISIONS, INC.            Topic: OSD08CR4

    Applied Visions, Inc. (AVI) is pleased to present this proposal for a Phase II follow-on effort to our Phase I work on Topic OSD08-CR4 “Dynamic Modeling of Safe Routes”. Our concept is to build an Adaptive Visualization of Safe Optimized Routes (AVIsor). Our efforts leveraged work we are performing for NAVAIR on a similar project which is aimed at fielding the Tactical Target Analysis and Pred ...

    SBIR Phase II 2009 Department of DefenseNavy
  5. Graphical Trace Object (GTO) Tool

    SBC: APPLIED VISIONS, INC.            Topic: N08003

    During Phase I we designed and built proof-of-concept prototypes of key iTVO components. In the Phase I Option period we will integrate those components into a single Phase I prototype that will be demonstrated to NAVAIR personnel to gather feedback. During Phase II, we will update and expand the iTVO prototype based on that feedback as well as additional surveys of potential users. That early Pha ...

    SBIR Phase II 2009 Department of DefenseNavy
  6. Lightweight Structures Roadside Blast Protection

    SBC: Armorworks Enterprises, Inc.            Topic: N09T032

    The goal of this STTR Phase I program is to develop lightweight and volumetrically-efficient structures that can be applied to the underbody and sides of lightweight tactical vehicles such as the High Mobility Multipurpose Wheeled Vehicle (HMMWV) or Mine-Resistant Ambush Vehicle (MRAP). The design will meet the weight goal to be less than 10 lb/ft2, and to reduce the amount of blast impulse or bla ...

    STTR Phase I 2009 Department of DefenseNavy
  7. Flexible Body Armor

    SBC: Armorworks Enterprises, Inc.            Topic: N08107

    Our SBIR Phase I effort focuses on developing a flexible armor system which is capable of meeting current Level IV protection requirements. We plan to use commercially available materials similar to the current armor plates such as the E-SAPI and X-SAPI plates. Our unique design uses multiple shapes of ceramic tiles in a multi-layered configuration. This design will provide flexibility and increas ...

    SBIR Phase I 2009 Department of DefenseNavy
  8. Metrology of Corrective Optics for Conformal Windows and Domes Using Scanning Low-Coherence Dual-Wavelength Interferometry

    SBC: ASE OPTICS            Topic: N08029

    As technology advances, there is increasing demand for higher quality optics with fewer aberrations. Aspheric optics meet these needs, but at present commercial systems to test such lenses are limited. This keeps the costs high and stifles the market. During Phase I of this project, ASE Optics has developed a non-contact metrology system capable of simultaneously measuring the internal and externa ...

    SBIR Phase II 2009 Department of DefenseNavy
  9. Robust Autonomous Maneuvering of Unmanned Air Systems in Challenging Environmental/Weather Conditions for Safety, Mission Effectiveness, and Endurance

    SBC: Atair Aerospace, Inc            Topic: N09T025

    The objective of this proposal is to develop and demonstrate methods of autonomous guidance and flight control that will permit safer and more effective operation of unmanned air systems under challenging weather conditions, and to exploit to the extent possible utilization of winds and other environmental conditions to increase mission effectiveness. Atair Aerospace has over the past 5 years dev ...

    STTR Phase I 2009 Department of DefenseNavy
  10. Composite-to-Metal Jointing Technology

    SBC: BELTRAN, INC.            Topic: N07T021

    Beltran proposes to continue the development of an advanced technology for joining of large composite and steel hull structures which are not prone to sudden failure and have much higher strain-to-failure ratio and increased energy absorption than conventional bonds. To ensure joints "structural efficiency, durability, producibility, reparability, and affordability, the Phase II STTR project will ...

    STTR Phase II 2009 Department of DefenseNavy
US Flag An Official Website of the United States Government