You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Modified GMAW System for Distortion Reduction and Travel Speed Increase through Separate Heat Input and Deposition Rate Control

    SBC: ADAPTIVE INTELLIGENT SYSTEMS            Topic: N07211

    In traditional GMAW and modifications, the current melting the wire is the same as the current heating the base metal. To maintain a minimally acceptable productivity, the base metal heat input is typically much greater than the required to control the distortion at an acceptable or desirable level. In the modified GMAW proposed, a bypass torch is added to an existing GMAW system to bypass part of ...

    SBIR Phase II 2009 Department of DefenseNavy
  2. Highly Corrosion Resistant Aluminum Alloys: Innovative Processing Methods to Enhanced Corrosion Resistance (e.g., layered structures, etc.)

    SBC: ATI, INC.            Topic: OSD09C03

    Two different approaches will be investigated for producing aluminum alloys with a layer structure that have mechanical properties similar to Al 7050-T7 and Al 7075-T6 and greatly improved corrosion resistance. Layered aluminum alloys will be produced using the Novelis-Fusion™ casting process. This process is very cost effective and has been demonstrate on commercial products. The other appro ...

    SBIR Phase I 2009 Department of DefenseNavy
  3. Innovative Methodologies for the Development of a High Strength, Anodize-Free Corrosion Resistant, Aerospace Aluminum Alloys

    SBC: ATI, INC.            Topic: OSD09C02

    The objective of this program is develop high strength aluminum alloys ( as high strength as that of 7075-T6) that would not require anodization to achieve corrosion resistance. Among the Al alloy systems, only 7xxx and Al-Cu-Li alloy systems are capable of such a high strength level of 7075-T6 properties ( design minimum tensile yield stress of 75 ksi). Therefore, only these two alloy systems ...

    SBIR Phase I 2009 Department of DefenseNavy
  4. Nanoporous Thermal Barrier Coatings for Aircraft Structural Surfaces

    SBC: Fiber Materials, Inc.            Topic: N091033

    The need exists for a low-density and low-conductivity spray-in-place thermal barrier coating for application to aluminum and composite aircraft surfaces. Fiber Materials, Inc. (FMI®) has a family of commercial thermal barrier systems, designated FlexFram™, which are TRL9/MRL10 Navy-qualified thermal barrier coatings originally developed for protection of ship surfaces from rocket motor blasts ...

    SBIR Phase I 2009 Department of DefenseNavy
  5. High Temperature, High Stress GPS Antenna Window

    SBC: Fiber Materials, Inc.            Topic: N08215

    The development of guided munitions offers interesting challenges in system, component, and materials design. Indeed, system requirements drive component requirements which, in turn, drive material requirements. A prime example of this linkage may be seen in the component of focus for this proposed effort; a GPS antenna. The primary functionality of these components, EM transparency for trackin ...

    SBIR Phase I 2009 Department of DefenseNavy
  6. Development of a Miniature, Vibro-Mechanical Energy Harvester for Powering Wireless Sensors

    SBC: MicroStrain, Inc.            Topic: N07178

    A major barrier to the widespread adoption of wireless sensors for structural health monitoring is the requirement to power the network of wireless nodes. Batteries have a limited lifespan, adding significant size, weight, and costs to the wireless sensor network,and may represent a long term environmental problem. Battery maintenance can be eliminated by harvesting energy from the environment. Fo ...

    SBIR Phase II 2009 Department of DefenseNavy
  7. Control Surface Buffet Load Measurement

    SBC: MicroStrain, Inc.            Topic: N091013

    Structural monitoring of Navy aircraft is of critical importance as the fleet ages. One critical area includes the control surfaces, which are subject to intense, dynamic buffet loading which can lead to structural cracking. The highly transient nature of buffet loading makes it difficult to measure using conventional sensors. We propose to solve this problem by combining a network of time-synchro ...

    SBIR Phase I 2009 Department of DefenseNavy
US Flag An Official Website of the United States Government