You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. High Efficiency, Aerodynamically Enhanced Vaneaxial Fan

    SBC: Cornerstone Research Group, Incorporated            Topic: OSD08E12

    CRG’s highly efficient, aerodynamically enhanced vaneaxial fan is designed to reduce the overall size and weight of current systems by at least 50% and operate an efficiency of at least 85%. To accomplish this CRG will perform an in depth study on the de

    SBIR Phase I 2009 Department of DefenseNavy
  2. Structural Blast Energy Absorber

    SBC: Cornerstone Research Group, Incorporated            Topic: N09T032

    Light, maneuverable, fast and fully protected vehicles are needed on today''s battlefields. In a field of operations, US military vehicles often encounter landmines, improvised explosive devises (IEDs), and other explosive threats towards the underside and sides of the vehicle. These threats, unfortunately, can contribute to warfighter casualties. Military vehicles, therefore, require adequate ...

    STTR Phase I 2009 Department of DefenseNavy
  3. Reflexive Marine Systems for Autonomous Structural Repair

    SBC: Cornerstone Research Group, Incorporated            Topic: N08051

    Cornerstone Research Group Inc. (CRG) proposes to develop composite marine vehicles capable of autonomous heath monitoring in service with capability to control and mitigate damage sustained during operation resulting from impact, fatigue or over-stressing components. Restoration of the structural integrity of damaged areas will be accomplished through an autonomous sensor initiated healing cycle. ...

    SBIR Phase II 2009 Department of DefenseNavy
  4. Automatic User Interface Configuration Management

    SBC: Edaptive Computing, Inc.            Topic: N091061

    Our proposal specifically addresses the stated requirements of the Navy solicitation: we will develop tools and methods enabling the development of software User Interfaces for different implementation platforms from single designs that are directly linked to and validated against requirements. The proposed EDAptive® COOL capability will build upon previous EDAptive Computing, Inc (ECI) knowledge ...

    SBIR Phase I 2009 Department of DefenseNavy
  5. Faradayic Bulk Anodizing of Aluminum Parts for Small Arms

    SBC: Faraday Technology, Inc.            Topic: N08114

    This SBIR program addresses the need for an innovative manufacturing process for bulk anodizing of a large number of small aluminum alloy parts, by cominbing bulk anodizing with a sophisticated electrochemical anodization technique and an innovative cell design. The anticipated results in this Phase I SBIR program include (1) development of a Faradayic anodizing process that meets the need for ano ...

    SBIR Phase I 2009 Department of DefenseNavy
  6. Analog to Information (A2I) Sensing for Software Defined Receivers

    SBC: Gird Systems, Inc.            Topic: N092106

    ELINT systems are often limited in bandwidth because the Nyquist criterion restricts the sampled bandwidth to one half of the maximum sampling rate of the A/D converter. While A/D converter technology has improved over the last several years, it is still not sufficient for many wideband applications. Compressive sensing (CS) is a revolutionary concept recently proposed that allows for wider bandwi ...

    SBIR Phase I 2009 Department of DefenseNavy
  7. Multi-carrier VHF/UHF amplifier with suppressed intermodulation products

    SBC: Gird Systems, Inc.            Topic: N07154

    Non-linear effects in amplifiers for communications systems such as intermodulation products can reduce efficiency and introduce RF interference into other bands. GIRD Systems herein proposes a method of amplifier linearization to mitigate the nonlinear effects. The hardware architecture is designed to minimize insertion loss and remain compatible with existing amplifier devices. The approach has ...

    SBIR Phase II 2009 Department of DefenseNavy
  8. Prevention of Corrosion for Navy Aviation

    SBC: C2 TECHNOLOGY, INC.            Topic: N091030

    Development of the Patrol Aircraft Monitoring System will provide the ability to develop an individual aircraft corrosion tracking and repair schema that will utilize the results from the most recent aircraft inspections, predictive algorithms, and effective graphical interfaces to determine the most effective maintenance activities for an individual aircraft based on inspection results (corrosion ...

    SBIR Phase I 2009 Department of DefenseNavy
  9. Improved Electrical Contact Materials for Extremely High Current Sliding Contact Materials

    SBC: IAP RESEARCH, INC.            Topic: N091069

    For Naval railgun technology to be a reality launch package armature mass and armature induced rail wear must be significantly reduced. Lighter materials with enhanced electro-thermal properties and mechanical properties equivalent to current aluminum alloys are required. IAP is proposing the development of a powder metal (P/M) magnesium armature material reinforced with aligned carbon nano-tube ( ...

    SBIR Phase I 2009 Department of DefenseNavy
  10. Bore Insulator Protection Layer for a Naval Electromagnetic Launcher

    SBC: IAP RESEARCH, INC.            Topic: N08074

    This project will develop several bore insulator surface concepts to overcome the limitations found in current insulator designs. Prototype insulators will be built and validated through railgun testing in Phase I.

    SBIR Phase I 2009 Department of DefenseNavy
US Flag An Official Website of the United States Government