You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Pilot Physiologic Assessment System (PPAS)

    SBC: ORBITAL RESEARCH INC            Topic: N091018

    Orbital Research Inc in collaboration with NASA Glenn Research Center (NASA GRC), Kent State University (KSU) and Massachusetts Institute of Technology (MIT) will design and test the second generation, Pilot Physiologic Assessment System (PPAS-2) as part of the Phase I option and Phase II SBIR program funded by the U.S. Navy. The system will be a comprehensive bio-monitoring suite that acquires ph ...

    SBIR Phase II 2010 Department of DefenseNavy
  2. Innovative Concepts for Ultra-light and Reliable Hydraulic Actuators

    SBC: Demeton Technologies, Inc.            Topic: N08119

    It is proposed to initiate a research program to design and manufacture a composite housing gear system for the next generation of NAVY F/A-18 and F-35 aircrafts. The present systems use steel housing which lack the low weight requirements for the design of the Wing Fold Transmission systems. The proposed effort relies on replacing the current steel made Ring Gear Housing System with the Carbon Re ...

    SBIR Phase II 2010 Department of DefenseNavy
  3. Very Rapid Cure Capable Resin and Optimization for Pre-Preg Process Development of Barrier or Isolation Ply Materials

    SBC: RENEGADE MATERIALS CORPORATION            Topic: N08150

    The current manufacturing processes used for restoring corrosion protection on F-35 aircraft composites panels are time consuming and wasteful. The goal of this Phase II program is to demonstrate and deliver a low-energy-cure, epoxy-fiberglass prepreg that can be used to restore the galvanic barrier on the F-35 fighter aircraft. Ultraviolet (UV) and Light Emitting Diode (LED) cure resin systems re ...

    SBIR Phase II 2010 Department of DefenseNavy
  4. Automatic User Interface Configuration Management

    SBC: EDAPTIVE COMPUTING INC            Topic: N091061

    Edaptive Computing, Inc. (Edaptive) presents our Phase II proposal for a unique and commercially viable solution to the problem of developing software user interface components that are required to support simultaneous heterogeneous platform technologies and/or operating systems, and that are directly traced to and validated against operational requirements. Our Common Configuration Management Int ...

    SBIR Phase II 2010 Department of DefenseNavy
  5. Innovative Low-cost, In-situ Consolidation Head for Complex Geometry Thermoplastic Fiber Placement

    SBC: ADC Acquisition Co. dba Automated Dynamics            Topic: N08135

    This SBIR program specifically focuses in on innovative approaches to overcome the limitations associated with both the non-conformity of the rigid steel consolidation roller as well as building upon the individual tow control functionality of thermoplastic processing heads. Our main objective within the Phase I portion of the program was to develop and demonstrate at a high level, an innovative m ...

    SBIR Phase II 2010 Department of DefenseNavy
  6. Cure System Equipment Optimization for Rapid Cure Epoxy Coated Fiberglass

    SBC: RENEGADE MATERIALS CORPORATION            Topic: N08137

    Military aerospace structures require that a fiberglass galvanic corrosion isolation layer be used between any graphite composite parts in contact with aluminum. Adding a layer of fiberglass prepreg onto the aluminum-mating side of the composite laminate is a simple way to meet this requirement. Rapid curing resins and prepreg initiated using UltraViolet (UV) or Light Emitting Diode (LED) energy a ...

    SBIR Phase II 2010 Department of DefenseNavy
  7. Development of Multifunctional Erosion-Resistant Damping Coating Systems and Application Methods for IBRs and Blisks

    SBC: HERMAN ADVANCED ENGINEERING INC            Topic: N08144

    The objective of the proposed work is to further develop the erosion-resistant damping coating technology to Technology Readiness Level (TRL) 5 & 6 and to demonstrate TRL 5 & 6 by testing a coated IBR via a bench test and by testing in a relevant environment engine test, respectively. The efforts will be carried out by a team of investigators at Herman Advanced Engineering and several other instit ...

    SBIR Phase II 2010 Department of DefenseNavy
  8. High Fidelity Modeling of Building Collapse with Realistic Visualization of Resulting Damage and Debris

    SBC: Thornton Tomasetti, Inc.            Topic: DTRA082005

    The proposed Phase II effort investigates innovative finite element formulations, alternative structural modeling procedures and modern parallel computational strategies to improve the computational performance of high fidelity simulation software for modeling the progressive collapse behavior of blast damaged buildings. Its goal is to reduce the time required to compute and visualize high fideli ...

    SBIR Phase II 2010 Department of DefenseDefense Threat Reduction Agency
  9. Standardized Hardware Independent Framework for Active Sensing

    SBC: Samraksh Company, The            Topic: SB082033

    We propose to implement a platform based on the .NET Micro Framework (MF) for mote-scale Wireless Sensor Networks (WSNs) and Active Tag Networks (ATNs). The resulting middleware would significantly simplify the development of applications on these systems, both by providing a hardware-independent, high-level, development environment and by providing standard implementations for essential services ...

    SBIR Phase II 2010 Department of DefenseNavy
  10. Portable Biometric System (PBS) for Identity Dominance

    SBC: InterScience, Inc.            Topic: N08210

    The objective of this Phase II project is to implement the design for a portable multimodal biometric device design developed under the Phase I effort with further refinements for insertion into the Navy’s Identity Dominance System (IDS) program. The implementation has been designed to meet all the Key Performance Parameters and Key System Attributes for the AN/PYX-1 specified for IDS insertion, ...

    SBIR Phase II 2010 Department of DefenseNavy
US Flag An Official Website of the United States Government