List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Reduction of Structural Mass Fraction for Extreme Solar HALE Flying Wings

    SBC: Bally Ribbon Mills            Topic: SB072044

    The VULTURE Air Vehicle Program is an exploratory development program with the overall goal to develop and demonstrate the ability to deliver and maintain an airborne payload on station for an uninterrupted period exceeding 5 years using a heavier-than-air platform system. It is envisioned that this program will, at a minimum, develop and demonstrate advanced reliability technologies for air vehi ...

    SBIR Phase I 2007 Department of DefenseDefense Advanced Research Projects Agency
  2. Predictive OPFORS for Planning and Simulation (PROPS)

    SBC: Soar Technology, Inc.            Topic: A06210

    The need for automation within the US Army’s intelligence collection processes is a well known problem. Intelligence teams do not have the tools to support dynamic battlefield situation management and prediction – two processes that are required for effective and efficient intelligence gathering. The Predictive OPFOR for Planning and Simulation (PROPS) system addresses this need by providing ...

    SBIR Phase II 2007 Department of DefenseDefense Advanced Research Projects Agency
  3. Mid-infrared Fiber Laser Based on Super-Continuum

    SBC: OMNI SCIENCES, INC.            Topic: ST051008

    Infrared counter-measures require a mid-infrared laser operating between 2-5 microns with time-averaged powers of 5W and more. Omni Sciences, Inc.'s (OSI's) Mid-Infra-Red FIber Laser (MIRFIL) will generate continuous light over the mid-IR, 2-5 microns, with time-averaged power scalable to more than 5W. The MIRFIL is a practical super-continuum (SC) source using commercial off-the-shelf (COTS) la ...

    STTR Phase II 2007 Department of DefenseDefense Advanced Research Projects Agency
  4. Information Delivery and Display for Shared Awareness in the Net Centric Battlespace

    SBC: Discovery Machine, Inc.            Topic: SB052009

    Discovery Machine, Inc. (DMI) proposes to create and extend technologies and methodologies for capturing knowledge from subject matter experts (SMEs). The expertise will be gathered in the form of graphical models of hierarchical task-decomposition networks (HTNs) and semantic networks (SNs). The modeling will be performed directly by the SMEs through the Discovery Machine Expertise Encoding and ...

    SBIR Phase II 2007 Department of DefenseDefense Advanced Research Projects Agency
  5. Energy Storage Systems for Very High Altitude Very Long Endurance Solar Aircraft

    SBC: Yardney Technical Products, Inc.            Topic: SB072041

    One of the major challenges of developing aircraft is the development of an appropriate energy system. The energy system ideally has a large amount of energy with a very low weight. This equates to a high specific energy (Wh/kg). Lithium-air batteries offer the greatest theoretical specific energy for batteries at 13 kWh/kg. Yardney has extensive experience in requirements for battery power and me ...

    SBIR Phase I 2007 Department of DefenseDefense Advanced Research Projects Agency
  6. Soar-Longevity: A Sustainable Autonomic Architecture for Organically Reconfigurable Computing Systems

    SBC: Soar Technology, Inc.            Topic: SB072009

    Soar Technology proposes the Soar-Longevity autonomic architecture for self-adapting sustainable performance. Soar-Longevity utilizes a two-tiered approach to synergize lower-level organic computing elements and upper-level cognitive supervisory elements. Soar Technology’s Cognitive Layer monitors the organic computing elements with respect to mission performance specifications. The Cognitive ...

    SBIR Phase I 2007 Department of DefenseDefense Advanced Research Projects Agency
  7. Unmanned Underwater Riverine Craft (UURC)

    SBC: SEALANDAIRE TECHNOLOGIES, INC.            Topic: SB072040

    There is an operational need to carry out clandestine surveillance tasks in Riverine and shallow water environments. Successful execution of these tasks will require an Unmanned Underwater Riverine Craft (UURC) with specialized capabilities. This response to SBIR072-040 will initiate development of a UURC capable of: Navigating submerged in rivers, inlets, and harbors as well as in coastal and s ...

    SBIR Phase I 2007 Department of DefenseDefense Advanced Research Projects Agency
  8. Advanced Low Cost Automated Manufacturing Technology for Prismatic Lithium Battery Cells (Discrete-Parts)

    SBC: LithChem Energy / Div. of TOXCO, inc.            Topic: DLA07001

    LithChem has designed an innovative low cost continuous automated manufacturing process for making prismatic lithium battery cells, the main cost (discrete-part) for lithium batteries. The process consists of three key pieces of innovative equipment: 1) a novel coater for continuously coating the electrodes which has been built; 2) a continuous automated assembly machine for combined cutting, wel ...

    SBIR Phase I 2007 Department of DefenseDefense Logistics Agency
  9. ULTRA HIGH SPEED AND PRECISION HYDROSTATIC GRINDING SPINDLE WITH AXIAL OSCILLATION OF THE ROTATING SHAFT

    SBC: ELKA PRECISION, LLC            Topic: DLA07001

    We propose to develop an ultra-high speed hydrostatic spindle with maximum speed of 120,000rpm and combine it with high frequency axial oscillations of about few kilohertz. Ultra-high speed hydrostatic spindle for internal grinding with axial oscillations of rotating shaft effectively combines advantages of hydrostatic spindles with the unique technological potential of high frequency axial oscil ...

    SBIR Phase I 2007 Department of DefenseDefense Logistics Agency
  10. Nanocrystalline Inorganic Powder Molding

    SBC: Clear Align LLC            Topic: DLA07001

    The proposed Phase I development program is geared towards the production of low-cost optical components through a novel manufacturing process called Nanocrystalline Powder Molding (NPM). Military infrared imaging systems are required in the MWIR and LWIR for the purposes of surveillance and target acquisition. As these systems become more and more critical in the battlefield as well as in the c ...

    SBIR Phase I 2007 Department of DefenseDefense Logistics Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government