You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Novel schemes for highly reliable aerospace electromechanical primary actuation systems

    SBC: LCDRIVES CORP.            Topic: SB132005

    There is a need to achieve 10^-9 reliability for actuators for critical aerospace applications and this precludes single point failure for all but the simplest and most reliable electrical and mechanical components. LC Drives proposes a method of constructing a high reliability linear actuator for critical aerospace applications that is designed such that jams caused by conventional electrical a ...

    SBIR Phase I 2013 Department of DefenseDefense Advanced Research Projects Agency
  2. Novel Extensible Design Approaches for Advanced Aircraft Composite Structural Architectures (MSC P4135)

    SBC: MATERIALS SCIENCES LLC            Topic: ST13A006

    Among the factors that inhibit the use of composite materials in both general aviation aircraft and DoD platforms are the high cost of engineering and the cost of certification. Unless manufacturers can control risk when introducing new materials and pro

    STTR Phase I 2013 Department of DefenseDefense Advanced Research Projects Agency
  3. Looking Glass

    SBC: Intific, Inc.            Topic: 004

    Looking Glass is an immersive, story-driven game experience that enables computer science education for students K-12. It presents learning in a game-based series of challenge levels that permit a high degree of player choice in tailoring educational progression and adapting game systems that present both STEM and SEL interactions. Gameplay occurs within a futuristic Wonderland, where proficiency ...

    SBIR Phase I 2013 Department of DefenseDefense Advanced Research Projects Agency
  4. Integrated System Health Management for Flexible Exploration

    SBC: QUALTECH SYSTEMS, INC.            Topic: X603

    Long-duration robotic and manned space missions have a number of unique requirements for mission success. These include ultra-high reliability, safety, sustainability and affordability of launch vehicles and spacecraft. These requirements, in turn, are allocated among critical subsystems, such as engines, propellants, structures, software systems, thermal protection, power, avionics, life support, ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  5. Software Tools for Fault Management Technologies

    SBC: QUALTECH SYSTEMS, INC.            Topic: S605

    Fault Management (FM) is a key requirement for safety, efficient onboard and ground operations, maintenance, and repair. QSI's TEAMS Software suite is a leading facilitator diagnostic and FM modeling, and performing various FM-related functions. Through this effort, QSI proposes to introduce capabilities to TEAMS that would significantly Reduce diagnostic model development cost and time, Enha ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  6. Innovative High Temperature Heat Pipes for Spacecraft Nuclear Fission Systems

    SBC: ADVANCED COOLING TECHNOLOGIES INC            Topic: X803

    NASA Glenn is examining small fission reactors for future space transportation and surface power applications. The reactors would have an 8 to 15 year design life and should be available for a 2020 launch to support future NASA science missions. Both 1 kWe thermoelectric and 3 kWe Stirling systems have been examined. Heat pipes are being examined to transfer the thermal energy from the reactor ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  7. Improved Dried Biological Specimen Materials, Recovery and Processing for Diagnostics

    SBC: CONNECTICUT ANALYTICAL CORPORATION            Topic: SB112005

    The dried blood spot (DBS) method is an alternative to venipuncture. The available data indicates that the DBS method is both precise and accurate for a diverse range of compounds. We discovered that proprietary additives vastly improve extraction of proteins in DBS using electrospray. Our unexpected results appear to dramatically increase analyte recovery concentration while reducing DBS prep, an ...

    SBIR Phase II 2013 Department of DefenseDefense Advanced Research Projects Agency
  8. Advanced Materials and Methods for Biospecimen Collection for Infectious Disease

    SBC: Viridis Solutions            Topic: ST12B001

    In this Phase I research effort we propose to construct an advanced design for a collection swab to be used for collection and storage of biospecimens. Viridis Solutions and Dr. Magnus Bergkvist and Dr. Melendez (College of Nanoscale Science & Engineering, University at Albany) propose a novel nanofabricated swab that is capable of absorbing and stabilizing biospecimens for long-term storage and ...

    STTR Phase I 2013 Department of DefenseDefense Advanced Research Projects Agency
  9. Space Electronics Operating at High Temperatures and Radiation Levels

    SBC: QORTEK INC            Topic: S305

    The objective is to produce high efficiency DC/DC power modules in a small low profile package that can tolerate extreme environment conditions. The primary effort of the Phase II program is to address the need for very high performance power electronics that meet a combination of high radiation tolerance, high thermal tolerance and extremely low EMI susceptibility/radiation. The power modules in ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  10. Calculation of Effective Material Strengths for 3D Woven Hybrid Preforms and Composites

    SBC: MATERIALS RESEARCH & DESIGN INC            Topic: H701

    Current NASA programs, such as Adaptable, Deployable Entry and Placement Technology (ADEPT) and Woven Thermal Protection Systems (WTPS) are looking to fill a gap in ablative TPS for future missions to Venus and Saturn, human missions beyond Lunar, and Mars Sample Return Missions. Both of these programs rely on the use of 3D woven carbon fiber preforms. Therefore, there is a need to be able to pr ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government