Award Data

There is a need to achieve 10^-9 reliability for actuators for critical aerospace applications and this precludes single point failure for all but the simplest and most reliable electrical and mechanical components. LC Drives proposes a method of constructing a high reliability linear actuator for critical aerospace applications that is designed such that jams caused by conventional electrical a ...

This project aims to further develop the technology of frequency stabilized lasers for microwave generation, laser radar and other precision measurement applications. The goal is to decrease the noise floor of the stabilized laser to ~ 6 x 10^-16 at 1 s, and improve operational robustness to allow the device to be transported and operated at the Hz level in stand-alone operation, and mitigate the ...

Among the factors that inhibit the use of composite materials in both general aviation aircraft and DoD platforms are the high cost of engineering and the cost of certification. Unless manufacturers can control risk when introducing new materials and pro

Looking Glass is an immersive, story-driven game experience that enables computer science education for students K-12. It presents learning in a game-based series of challenge levels that permit a high degree of player choice in tailoring educational progression and adapting game systems that present both STEM and SEL interactions. Gameplay occurs within a futuristic Wonderland, where proficiency ...

Advances in biodegradable materials have allowed the development of a variety of resorbable medical devices that do no need to be removed at the end of their service because they degrade within the body into not toxic by-products. However, devices that contain electronic components are still nearly all non-degradable because of the lack of biodegradable conducting and semiconducting materials. T ...

The dried blood spot (DBS) method is an alternative to venipuncture. The available data indicates that the DBS method is both precise and accurate for a diverse range of compounds. We discovered that proprietary additives vastly improve extraction of proteins in DBS using electrospray. Our unexpected results appear to dramatically increase analyte recovery concentration while reducing DBS prep, an ...

Genome-scale predictable cellular design and engineering of biomanufacturing systems is the overarching a goal of DARPA's Living Foundry thrust and, if realized, will enable rapid engineering of living biosystems for a broad range of applications in biotechnology and pharmacology. However, constructing living cells with designed genome is not fully automated and is severely limited by inhere ...

N/A

RECENT ADVANCES IN HIGH TEMPERATURE SUPERCONDUCTING (HTSC) THIN FILM TECHNOLOGY ENABLE THE FABRICATION OF LOW-LOSS COMPONENTS THAT WILL IMPROVE THE COST AND PERFORMANCE OF CHANNELIZED RECEIVERS. CHANNELIZED RECEIVERS ARE USED IN SATELLITE TRANSPONDER, ELECTRONIC WARFARE AND ELECTRONICS INTELLIGENCE APPLICATIONS AND ARE COMPRISED OF A GROUP OF NARROW BAND RECEIVERS THAT COVER INDIVIDUAL SLOTS IN A ...

SIGNIFICANT SIMPLIFICATION OF MICROWAVE PHASED ARRAY ANTENNA SYSTEM ARCHITECTURES CAN BE ACHIEVED WITH HTSC DEVICE TECHNOLOGY. ELIMINATION OF THE LOW NOISE AMPLIFIERS (LNAS) CAN BE ACCOMPLISHED THROUGH REPLACEMENT OF THE GAAS PHASE SHIFTERS WITH LOW LOSS HTSC COMPONENTS. A REDUCTION IN COMPLEXITY LOWERS BOTH SYSTEM WEIGHT ANDCOST. KEY TO HTSC TECHNOLOGY INSERTION IN PHASED ARRAY ANTENNAS IS THE DE ...