You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Additively Manufactured Inflatable Hulls- Improved Survivability- 20% Total Ownership Cost Reduction
SBC: Response Technologies, LLC Topic: DLA152001Seam failures of flexible inflatable hulls is the primary reason for failures of military RHIBS and CRCs.These failures are a result of the current manufacturing methods being used, and which have been in place for over fifty years.Whats more, the manufacturing methods and fragmented supply chain of these hulls result in very long and unreliable lead times.These shortcomings impact the survivabili ...
SBIR Phase II 2018 Department of DefenseDefense Logistics Agency -
Cloud Data Synchronization with Limited Bandwidth Communications
SBC: BLACK RIVER SYSTEMS COMPANY, INC. Topic: SOCOM163005As the DoD continues to develop applications backed by cloud-based data and enterprise infrastructures, remote-sites will require on-site data caches to permit operation during periods of disconnect from the enterprise.To address this challenge for SOCOMs Chimera system, Black River will develop a stand-alone Chimera system that is independent of Amazon cloud software; develop bi-directional data ...
SBIR Phase II 2018 Department of DefenseSpecial Operations Command -
Rotorcraft Fuel Bladder Weight and Total Ownership Cost Reduction
SBC: Response Technologies, LLC Topic: DLA182001Response Technologies will attempt to qualify to MIL-DTL-27422Fs phase I performance testing criteria for thefuel cell test cubes[Class BSemi rigid or self-supporting fuel construction, Type ISelf-sealing, and Protection Level CFull self-sealing against 50 caliber and partial self-sealing against 14.5 mm] .Response Technologiesuses an additive manufacturing process that initially creates a textile ...
SBIR Phase I 2018 Department of DefenseDefense Logistics Agency -
Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.
SBC: SENVOL LLC Topic: DLA18A001The Department of Defense (DoD) has a demand for out-of-production parts to maintain mission readiness of various weapons platforms. Additive manufacturing (AM) is an exciting and promising manufacturing technique that can make out-of-production parts and holds the potential to solve supply chain issues, such as high costs (i.e. for low-volume parts) and sole sourcing risks. The ability of AM to s ...
STTR Phase I 2018 Department of DefenseDefense Logistics Agency -
Reheating Air Inside Diving Equipment and Regulators (RAIDER)
SBC: PARAGON SPACE DEVELOPMENT CORPORATION Topic: SOCOM182003Military divers are experiencing negative medical side effects from inhalation of cold air or mixed gas (HeO2) while diving with a closed-circuit breathing apparatus.Therefore, SOCOM is looking for an innovative device that will reheat a divers inspired breathing gas to prevent a diver from experiencing hypothermia.Paragon will apply relevant experience in the design and manufacturing of active an ...
SBIR Phase I 2018 Department of DefenseSpecial Operations Command -
Handheld Hidden Chamber Detection
SBC: VAWD APPLIED SCIENCE & TECHNOLOGY CORP Topic: SOCOM173004VAWD has extensive experience developing technologies and products for Sense Through The Wall (STTW) and RF Penetration through materials. Based on our experience we believe that the RF spectrum is a natural fit to solve this problem. Therefore we have constrained our trade space for an optimized microwave technology solution.VAWD proposes techniques that will use Multi-Frequency discrimination in ...
SBIR Phase I 2018 Department of DefenseSpecial Operations Command -
3D Modeling Indoor Space
SBC: INTERNATIONAL ASSOCIATION OF VIRTUAL ORGANIZATIONS, INCORPORATED Topic: SOCOM173002SOCOM seeks an innovative, computationally efficient, and automated process that uses high-resolution, still-frame images and/or Full Motion Video, collected from handheld devices, to generate 3D models of building interiors.The ability to use handheld inputs for 3D modeling, at its fundamental level, is a core interest for computer vision and photogrammetric engineering. Hence, the solution will ...
SBIR Phase I 2018 Department of DefenseSpecial Operations Command -
Telesculptor Live
SBC: KITWARE INC Topic: SOCOM173003Special Forces need a clear, timely understanding of their operational environment.Imagery from unmanned aerial vehicles can familiarize a warfighter with a location but simply looking at videos or still imagery can be confusing.What direction is the UAV looking fromWhich of many similar buildings is in viewIn intelligence, speed of collection and processing can be just as important as accuracy. 3 ...
SBIR Phase I 2018 Department of DefenseSpecial Operations Command -
Reverse Engineering- Light, Dome: NIIN 015639517
SBC: Breault Research Organization, Inc. Topic: DLA171002The trend over the last several years is fewer businesses supplying manufactured products. Thus, by supply and demand, the cost of military hardware has increased with less competition. Furthermore, amortized cost of the qualifying a new product becomes cost prohibited resulting in non-competitive bids compared to historical averages. DLAs Replenishment Parts Purchase or Borrow program supports re ...
SBIR Phase I 2018 Department of DefenseDefense Logistics Agency -
Group 2 (<55lbs) Unmanned Aerial System for Special Operations Forces Tactical-Level Intelligence, Surveillance, and Reconnaissance Operations
SBC: THORPE SEEOP CORP Topic: SOCOM172005A technical approach is proposed to survey the industry for state of the art capabilities in terms of the SOCOM mission requirements described in the solicitation for the Group 2 Tactical ISR UAS. The results of the survey will select a configuration of potential candidate UAS that would meet the threshold and ultimately objective goals stated.
SBIR Phase I 2018 Department of DefenseSpecial Operations Command