You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Low-Loss Commercial Deposition Technology for Thick Ferrites and Ferrite/Insulator Films on Printed Circuit Boards

    SBC: WINCHESTER TECHNOLOGIES LLC            Topic: A16020

    Integration of RF ferrites on printed circuit boards (PCBs) is highly desired for realizing compact, lightweight and low-cost systems with different RF ferrite components, including inductors, antennas and antenna arrays, etc. However, it has been challenging to integrate ferrites on PCBs. Spin spray deposition can produce fully dense, high crystalline quality, and low-loss RF ferrites at a low te ...

    STTR Phase II 2018 Department of DefenseArmy
  2. Target Tracking via Deep Learning

    SBC: Systems & Technology Research LLC            Topic: AF17AT027

    To address the challenge of long-term tracking, through extended occlusions and significant appearance changes, we propose to continue developing DC-CAT, a Deep Convolutional neural network (CNN) based Confuser-Aware high value target (HVT) Tracker.The DC-CAT system combines a state-of-the-art CNN-based adaptive HVT tracker with a CNN-based pre-trained generic target detector, in a deep-feature-ai ...

    STTR Phase II 2018 Department of DefenseAir Force
  3. Biologically-Derived Targeted Antimicrobials for Textile Applications

    SBC: GINER INC            Topic: A14AT012

    Antimicrobial treatment of military textile systems is intended to provide enhanced protection to the Warfighter in the field by preventing colonization of harmful bacteria that cause various skin and soft tissue infections (SSTI) such as impetigo, boils, abscesses, cellulitis and life-threatening necrotizing fasciitis. Current treatments can impart antimicrobial functionality to textiles; however ...

    STTR Phase II 2018 Department of DefenseArmy
  4. Atomic Layer Deposition of Highly Conductive Metals

    SBC: RADIATION MONITORING DEVICES, INC.            Topic: A17AT001

    Novel photonic structures, such as periodic metal-dielectric photonic bandgap structures (MDPBG) have the potential to revolutionize the field of optical windows. The large mismatch in the permittivities of the metal and dielectric creates resonant tunneling, which allows for high transmission in regions where metals are typically opaque. This property makes MDPBGs very attractive for screening or ...

    STTR Phase II 2018 Department of DefenseArmy
  5. Wireless Non-Invasive Advanced Control of Microprocessor Prostheses and Orthoses

    SBC: LIBERATING TECHNOLOGIES INC            Topic: DHP17A005

    There are several current and imminent orthotic and prosthetic (O&P) fitting scenarios that would greatly benefit from the ability to wirelessly collect and transmit physiological information from the user. Both upper- and lower- limb O&P fittings that: 1) use osseointegration, 2) have cable management issues, and 3) could benefit from physiological information from locations proximal to the prost ...

    STTR Phase II 2018 Department of DefenseDefense Health Agency
  6. RASP- Automated Scoring Program for Rodent Ultrasonic Vocalizations (USVs)

    SBC: Mide Technology Corporation            Topic: DHP16C003

    Rodents serve as models for the human brain and behavior, and their calls give researchers a window into their mood. Unfortunately, rodent calls are ultrasonic, so a researcher must record a test and then play the audio back at a slower speed to manually categorize and count calls. Software does exist to accomplish this task, but it does not have the ease of use or accuracy that researchers want. ...

    STTR Phase II 2018 Department of DefenseDefense Health Agency
  7. Portable, Non-Contact, Quantitative, Physiology and Health Assessment Imaging System

    SBC: BODKIN DESIGN & ENGINEERING LLC            Topic: DHP16C005

    Accurate assessment of burn depth and surface area are important to clinical decision-making regarding treatment. Initial assessment determines fluid requirements and transportation decisions to distant-care facilities. The clinician must determine if the wound will heal itself or whether excision and grafting are necessary for optimal wound healing. The standard of care remains visual inspection ...

    STTR Phase II 2018 Department of DefenseDefense Health Agency
  8. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: SENVOL LLC            Topic: DLA18A001

    The Department of Defense (DoD) has a demand for out-of-production parts to maintain mission readiness of various weapons platforms. Additive manufacturing (AM) is an exciting and promising manufacturing technique that can make out-of-production parts and holds the potential to solve supply chain issues, such as high costs (i.e. for low-volume parts) and sole sourcing risks. The ability of AM to s ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  9. n-field self-calibration for inertial and magnetic sensors via electrical stimulus

    SBC: ALPHACORE INC            Topic: AF18AT002

    Alphacore will develop a compact tunable surface mount component (capacitor bank) with tunable component range of more than 10:1. It will provide a tuning mechanism for a wide range of filter topologies with user selectable range of 10 bits. A capacitance selection from 100fF to 100pF using high density CMIM capacitors over small foot print for a variety of bands used in wide applications includin ...

    STTR Phase I 2018 Department of DefenseAir Force
  10. Metasurface optics for compact and scalable polarization cameras

    SBC: Metalenz Inc.            Topic: AF18AT005

    Metasurfaces are a fascinating new direction for producing small form factor optical elements that can be directly integrated with a variety of sensors and illumination sources. Metasurfaces have received extensive attention for their potential applications in imaging optics as they enable significantly more compact camera modules with enhanced functionality and because the unit processes to creat ...

    STTR Phase I 2018 Department of DefenseAir Force
US Flag An Official Website of the United States Government