Award Data

THE RESEARCH HEREIN PROPOSED IS INTENDED TO ADDRESS THE CONTINUING PROBLEM OF ESTIMATING SOFTWARE COSTS OVER THE LIFE OF LARGE AND COMPLEX SOFTWARE PROJETS. THE RESEARCH WILL ADDRESS ALL FACTORS THAT AFFECT SOFTWARE COSTS FROM A FUNCTIONAL STANDPOINT AS OPPOSED TO THE TRADITIONAL LINES-OF-CODE (PROGRAM SIZE) APPROACH. THE FACTORS WILL BE TRANSLATED INTO A MODEL THAT EMPHASIZES THE IMPORTANCE OF IN ...

THIS PROJECT CONCERNS A UNIQUE APPROACH TO THE PRODUCTION OFHIGH ENERGY PRODUCT MAGNETS EMPLOYING RAPID SOLIDIFICATION METHODS. RIBBONS OF RARE EARTH-COBALT ALLOYS ARE RAPIDLY SOLIDIFIED TO PRODUCE A MICRON-SIZED COLUMNAR MICROSTRUCTUREAND THE COERCIVE FORCE DURING MAGNETIZATION IS CONTROLLED BY DOMAIN NUCLEATION MECHANISM. THIS EFFORT PRODUCES HIGH- CURIE-POINT, HIGH-ENERGY-PRODUCT PERMANENT MAGN ...

N/A

Applied Radar proposes to develop a high-gain low cost, size, power and weight (low-CSWAP) tactical common data link (TCDL) antenna for the Firescout and Predator UAVs. The improved TCDL antenna will support 6 or more nodes of high-gain full-duplex communication at 21.42 MBPS in a star network configuration with 360 degree coverage out to 110 nm slant range. In Phase 1, we will design, fabricate a ...

YTP will develop technology that provides a high performance, modular Li-ion battery with: redundant safety features, safer thin, metal case cell designs; fin/micro-channel thermal control system; and an evaporating fluid system that rapidly quenches failing cells to prevent thermal runaway and fratricide. The end goal of the proposal is making a lighter, longer lasting, less expensive, safer JSF ...

BTech proposes the design and development of a low-profile, broadband, shear-mode piezocrystal acoustic transducer for deep submergence applications. The Phase I effort considers evaluation of design variants of shear mode transducers with increased pressure operation/tolerance and tradeoffs associated with the same. Design feasibility is supported with calculations of expected performance and whe ...

Solid state lighting has not yet taken off in commercial buildings due to its high relative installed cost. On a normalized basis, solid state lighting replacement lamps are on the order of two times more expensive than equivalent compact fluorescent lamps (CFLs), and five times more expensive than an equivalent downlight fixture. An additional barrier relates to the performance and cost of the dr ...

A multi-band dual-aperture SATCOM antenna is proposed to support rotary-wing aircraft thru-rotor performance at X, Ku and Ka-bands including Ku-band TCDL as an option. Our proposed effort focuses on a low-cost design with reduced height and leverages existing aperture and radome technology from our prime contractor partner Lockheed-Martin. It also leverages existing digital modem technology develo ...

BTech proposes the design and development of low-profile, innovative acoustic velocity sensors for measuring acoustic motion of sound waves in marine applications. Methods include increasing voltage sensitivity by novel connections, considerations of co-located preamplifiers, multiple plates, improved materials and more. An improved acoustic motion accelerometer sensor for hull arrays is proposed ...

Missiles, use electro-explosive devices (EEDs) to perform mulitple functions during operation. This effort seeks ways to improve on the EED"s reliability and lower the failure or inadvertent activation rate of these devices. During Phase I, SEA CORP investigated replacing EEDs with commercial off the shelf (COTS) automotive airbag inflators to perform the required pneumatic functions of variou ...