Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Additively Manufactured Inflatable Hulls- Improved Survivability- 20% Total Ownership Cost Reduction

    SBC: Response Technologies, LLC            Topic: DLA152001

    Seam failures of flexible inflatable hulls is the primary reason for failures of military RHIBS and CRCs.These failures are a result of the current manufacturing methods being used, and which have been in place for over fifty years.Whats more, the manufacturing methods and fragmented supply chain of these hulls result in very long and unreliable lead times.These shortcomings impact the survivabili ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  2. Cloud Data Synchronization with Limited Bandwidth Communications

    SBC: BLACK RIVER SYSTEMS COMPANY INC            Topic: SOCOM163005

    As the DoD continues to develop applications backed by cloud-based data and enterprise infrastructures, remote-sites will require on-site data caches to permit operation during periods of disconnect from the enterprise.To address this challenge for SOCOMs Chimera system, Black River will develop a stand-alone Chimera system that is independent of Amazon cloud software; develop bi-directional data ...

    SBIR Phase II 2018 Department of DefenseSpecial Operations Command
  3. Rotorcraft Fuel Bladder Weight and Total Ownership Cost Reduction

    SBC: Response Technologies, LLC            Topic: DLA182001

    Response Technologies will attempt to qualify to MIL-DTL-27422Fs phase I performance testing criteria for thefuel cell test cubes[Class BSemi rigid or self-supporting fuel construction, Type ISelf-sealing, and Protection Level CFull self-sealing against 50 caliber and partial self-sealing against 14.5 mm] .Response Technologiesuses an additive manufacturing process that initially creates a textile ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  4. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: Senvol LLC            Topic: DLA18A001

    The Department of Defense (DoD) has a demand for out-of-production parts to maintain mission readiness of various weapons platforms. Additive manufacturing (AM) is an exciting and promising manufacturing technique that can make out-of-production parts and holds the potential to solve supply chain issues, such as high costs (i.e. for low-volume parts) and sole sourcing risks. The ability of AM to s ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  5. Telesculptor Live

    SBC: Kitware, Inc.            Topic: SOCOM173003

    Special Forces need a clear, timely understanding of their operational environment.Imagery from unmanned aerial vehicles can familiarize a warfighter with a location but simply looking at videos or still imagery can be confusing.What direction is the UAV looking fromWhich of many similar buildings is in viewIn intelligence, speed of collection and processing can be just as important as accuracy. 3 ...

    SBIR Phase I 2018 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government