You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Scalable Polymerized Metal-Organic Frameworks with CO2-philic Rubbery Polymers for Membrane CO2/N2 Separation

    SBC: Helios-NRG, LLC            Topic: 18d

    As fossil fuels continue to serve as a major energy source, CO2 capture for utilization or sequestration is the only option to mitigate the CO2 emissions to the environment. However, the separation of CO2 from flue gas is an extremely costly proposition with existing technologies. Advanced membrane technology may address this challenge, if new membranes with CO2 permeance of 4,500 gpu and CO2/N2 s ...

    STTR Phase I 2018 Department of Energy
  2. Innovative, Multifunctional Layered Coatings for High Temperature Ceramic Matrix Composites

    SBC: RELIACOAT TECHNOLOGIES, LLC            Topic: 18a

    The design and realization of thermal/environmental barrier coatings systems for the protection and insulation of ceramic matrix composites that can withstand combustion temperatures approaching 3100 Fahrenheit is a formidable challenge. But that is necessary for achieving 65% efficiency target in future combined-cycle gas-turbine engines. A multifaceted research program is proposed to address thi ...

    STTR Phase I 2018 Department of Energy
  3. Deep Borehole Storage of Nuclear Waste using MMW Technology

    SBC: Impact Technologies            Topic: 21a

    Deep borehole disposal of high level nuclear waste has been acknowledged by most experts as the best and safest method to permanently dispose the large volumes/ tons of such waste that have been generated (military and civilian) and surface stored over many decades at various sites around the country. Surface storage of such materials is not ideal. The cost of the required wells (drilling and com ...

    STTR Phase II 2014 Department of Energy
  4. PUMA-V: Polyhedral User Mapping Assistant and Visualizer

    SBC: RESERVOIR LABS INC            Topic: 39e

    The Polyhedral User Mapping Assistant and Visualizer (PUMA-V) project is addressing the challenges of developing optimized computer software for heterogeneous supercomputing systems in support of physics simulations needed for bringing theoretical calculations to the level of the newest precision experiments. Current Lattice Quantum Chromodynamics (LQCD) and Lattice Beyond Standard Model (LBSM) s ...

    STTR Phase II 2014 Department of Energy
  5. Advanced Membrane Technology for Helium Recovery

    SBC: Helios-NRG, LLC            Topic: 10d

    US production of Helium, a critical and irreplaceable resource that is currently produced from a few helium-rich natural gas reservoirs, is in rapid decline as these currently viable rich reserves are being depleted. The new technology being developed herein is required to recover helium from vast natural gas reservoirs containing concentrations too low for current economic recovery. This program ...

    STTR Phase II 2014 Department of Energy
  6. Deep Borehole Storage of Nuclear Waste using MMW Technology

    SBC: Impact Technologies            Topic: 21a

    Deep borehole disposal of high level nuclear waste has been acknowledged by most experts as the best and safest method to permanently dispose the large volumes/ tons of such waste that have been generated (military and civilian) and surface stored over many decades at various sites around the country. Surface storage of such materials is not ideal. The cost of the required wells (drilling and com ...

    STTR Phase I 2014 Department of Energy
  7. Automated Simulation of Selective Laser Melting Additive Manufacturing for Process Design

    SBC: SIMMETRIX INC.            Topic: 02a

    Additive Manufacturing (AM), where three-dimensional (3D) objects are created from a digital model by depositing and fusing successive layers of material, provides the ability to produce low-volume, customized products with complex geometries relatively quickly at a moderate cost. However, AM processes sometimes fail to produce acceptable parts, due to either geometric in- accuracy (e.g., shrinkag ...

    STTR Phase I 2014 Department of Energy
  8. Quantifying Appropriate De-rating of SiC MOSFETs Subject to Cosmic Rays

    SBC: MONOLITH SEMICONDUCTOR INC            Topic: 11b

    In this phase-I proposal, the effect of terrestrial cosmic rays on the failure rate of commercial 1200V SiC power MOSFETs will be studied. The goal of the study is to quantify the appropriate breakdown voltage de-rating needed for SiC MOSFETs subject to cosmic rays. The failure rate of SiC power MOSFETs as a function of the reverse blocking voltage will be determined and compared to failure rate o ...

    STTR Phase I 2014 Department of Energy
US Flag An Official Website of the United States Government