You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Additively Manufactured Inflatable Hulls- Improved Survivability- 20% Total Ownership Cost Reduction

    SBC: Response Technologies, LLC            Topic: DLA152001

    Seam failures of flexible inflatable hulls is the primary reason for failures of military RHIBS and CRCs.These failures are a result of the current manufacturing methods being used, and which have been in place for over fifty years.Whats more, the manufacturing methods and fragmented supply chain of these hulls result in very long and unreliable lead times.These shortcomings impact the survivabili ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  2. Cloud Data Synchronization with Limited Bandwidth Communications

    SBC: BLACK RIVER SYSTEMS COMPANY, INC.            Topic: SOCOM163005

    As the DoD continues to develop applications backed by cloud-based data and enterprise infrastructures, remote-sites will require on-site data caches to permit operation during periods of disconnect from the enterprise.To address this challenge for SOCOMs Chimera system, Black River will develop a stand-alone Chimera system that is independent of Amazon cloud software; develop bi-directional data ...

    SBIR Phase II 2018 Department of DefenseSpecial Operations Command
  3. Rotorcraft Fuel Bladder Weight and Total Ownership Cost Reduction

    SBC: Response Technologies, LLC            Topic: DLA182001

    Response Technologies will attempt to qualify to MIL-DTL-27422Fs phase I performance testing criteria for thefuel cell test cubes[Class BSemi rigid or self-supporting fuel construction, Type ISelf-sealing, and Protection Level CFull self-sealing against 50 caliber and partial self-sealing against 14.5 mm] .Response Technologiesuses an additive manufacturing process that initially creates a textile ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  4. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: SENVOL LLC            Topic: DLA18A001

    The Department of Defense (DoD) has a demand for out-of-production parts to maintain mission readiness of various weapons platforms. Additive manufacturing (AM) is an exciting and promising manufacturing technique that can make out-of-production parts and holds the potential to solve supply chain issues, such as high costs (i.e. for low-volume parts) and sole sourcing risks. The ability of AM to s ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  5. Reheating Air Inside Diving Equipment and Regulators (RAIDER)

    SBC: PARAGON SPACE DEVELOPMENT CORPORATION            Topic: SOCOM182003

    Military divers are experiencing negative medical side effects from inhalation of cold air or mixed gas (HeO2) while diving with a closed-circuit breathing apparatus.Therefore, SOCOM is looking for an innovative device that will reheat a divers inspired breathing gas to prevent a diver from experiencing hypothermia.Paragon will apply relevant experience in the design and manufacturing of active an ...

    SBIR Phase I 2018 Department of DefenseSpecial Operations Command
  6. Tamper Resistant/Anti-Counterfeit Package Labeling

    SBC: BURCHELL PROFESSIONAL GROUP, INC            Topic: DLA163003

    Tamper Resistant/Anti-Counterfeit Package Labeling.A new innovative best practice tamper resistant/Anti-counterfeiting package labeling technology was the focal of this research.

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  7. Handheld Hidden Chamber Detection

    SBC: VAWD APPLIED SCIENCE & TECHNOLOGY CORP            Topic: SOCOM173004

    VAWD has extensive experience developing technologies and products for Sense Through The Wall (STTW) and RF Penetration through materials. Based on our experience we believe that the RF spectrum is a natural fit to solve this problem. Therefore we have constrained our trade space for an optimized microwave technology solution.VAWD proposes techniques that will use Multi-Frequency discrimination in ...

    SBIR Phase I 2018 Department of DefenseSpecial Operations Command
  8. Telesculptor Live

    SBC: KITWARE INC            Topic: SOCOM173003

    Special Forces need a clear, timely understanding of their operational environment.Imagery from unmanned aerial vehicles can familiarize a warfighter with a location but simply looking at videos or still imagery can be confusing.What direction is the UAV looking fromWhich of many similar buildings is in viewIn intelligence, speed of collection and processing can be just as important as accuracy. 3 ...

    SBIR Phase I 2018 Department of DefenseSpecial Operations Command
  9. Reverse Engineering- Light, Dome: NIIN 015639517

    SBC: Breault Research Organization, Inc.            Topic: DLA171002

    The trend over the last several years is fewer businesses supplying manufactured products. Thus, by supply and demand, the cost of military hardware has increased with less competition. Furthermore, amortized cost of the qualifying a new product becomes cost prohibited resulting in non-competitive bids compared to historical averages. DLAs Replenishment Parts Purchase or Borrow program supports re ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  10. Group 2 (<55lbs) Unmanned Aerial System for Special Operations Forces Tactical-Level Intelligence, Surveillance, and Reconnaissance Operations

    SBC: THORPE SEEOP CORP            Topic: SOCOM172005

    A technical approach is proposed to survey the industry for state of the art capabilities in terms of the SOCOM mission requirements described in the solicitation for the Group 2 Tactical ISR UAS. The results of the survey will select a configuration of potential candidate UAS that would meet the threshold and ultimately objective goals stated.

    SBIR Phase I 2018 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government