List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Additively Manufactured Inflatable Hulls- Improved Survivability- 20% Total Ownership Cost Reduction

    SBC: Response Technologies, LLC            Topic: DLA152001

    Seam failures of flexible inflatable hulls is the primary reason for failures of military RHIBS and CRCs.These failures are a result of the current manufacturing methods being used, and which have been in place for over fifty years.Whats more, the manufacturing methods and fragmented supply chain of these hulls result in very long and unreliable lead times.These shortcomings impact the survivabili ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  2. Cloud Data Synchronization with Limited Bandwidth Communications

    SBC: BLACK RIVER SYSTEMS COMPANY INC            Topic: SOCOM163005

    As the DoD continues to develop applications backed by cloud-based data and enterprise infrastructures, remote-sites will require on-site data caches to permit operation during periods of disconnect from the enterprise.To address this challenge for SOCOMs Chimera system, Black River will develop a stand-alone Chimera system that is independent of Amazon cloud software; develop bi-directional data ...

    SBIR Phase II 2018 Department of DefenseSpecial Operations Command
  3. Rotorcraft Fuel Bladder Weight and Total Ownership Cost Reduction

    SBC: Response Technologies, LLC            Topic: DLA182001

    Response Technologies will attempt to qualify to MIL-DTL-27422Fs phase I performance testing criteria for thefuel cell test cubes[Class BSemi rigid or self-supporting fuel construction, Type ISelf-sealing, and Protection Level CFull self-sealing against 50 caliber and partial self-sealing against 14.5 mm] .Response Technologiesuses an additive manufacturing process that initially creates a textile ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  4. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: Senvol LLC            Topic: DLA18A001

    The Department of Defense (DoD) has a demand for out-of-production parts to maintain mission readiness of various weapons platforms. Additive manufacturing (AM) is an exciting and promising manufacturing technique that can make out-of-production parts and holds the potential to solve supply chain issues, such as high costs (i.e. for low-volume parts) and sole sourcing risks. The ability of AM to s ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  5. Reheating Air Inside Diving Equipment and Regulators (RAIDER)

    SBC: Paragon Space Development Corporation            Topic: SOCOM182003

    Military divers are experiencing negative medical side effects from inhalation of cold air or mixed gas (HeO2) while diving with a closed-circuit breathing apparatus.Therefore, SOCOM is looking for an innovative device that will reheat a divers inspired breathing gas to prevent a diver from experiencing hypothermia.Paragon will apply relevant experience in the design and manufacturing of active an ...

    SBIR Phase I 2018 Department of DefenseSpecial Operations Command
  6. Handheld Hidden Chamber Detection

    SBC: VAWD APPLIED SCIENCE & TECHNOLOGY CORPORATION            Topic: SOCOM173004

    VAWD has extensive experience developing technologies and products for Sense Through The Wall (STTW) and RF Penetration through materials. Based on our experience we believe that the RF spectrum is a natural fit to solve this problem. Therefore we have constrained our trade space for an optimized microwave technology solution.VAWD proposes techniques that will use Multi-Frequency discrimination in ...

    SBIR Phase I 2018 Department of DefenseSpecial Operations Command
  7. 3D Modeling Indoor Space

    SBC: INTERNATIONAL ASSOCIATION OF VIRTUAL ORGANIZATIONS, INCORPORATED            Topic: SOCOM173002

    SOCOM seeks an innovative, computationally efficient, and automated process that uses high-resolution, still-frame images and/or Full Motion Video, collected from handheld devices, to generate 3D models of building interiors.The ability to use handheld inputs for 3D modeling, at its fundamental level, is a core interest for computer vision and photogrammetric engineering. Hence, the solution will ...

    SBIR Phase I 2018 Department of DefenseSpecial Operations Command
  8. Telesculptor Live

    SBC: Kitware, Inc.            Topic: SOCOM173003

    Special Forces need a clear, timely understanding of their operational environment.Imagery from unmanned aerial vehicles can familiarize a warfighter with a location but simply looking at videos or still imagery can be confusing.What direction is the UAV looking fromWhich of many similar buildings is in viewIn intelligence, speed of collection and processing can be just as important as accuracy. 3 ...

    SBIR Phase I 2018 Department of DefenseSpecial Operations Command
  9. Reverse Engineering- Light, Dome: NIIN 015639517

    SBC: Breault Research Organization, Inc.            Topic: DLA171002

    The trend over the last several years is fewer businesses supplying manufactured products. Thus, by supply and demand, the cost of military hardware has increased with less competition. Furthermore, amortized cost of the qualifying a new product becomes cost prohibited resulting in non-competitive bids compared to historical averages. DLAs Replenishment Parts Purchase or Borrow program supports re ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  10. Group 2 (<55lbs) Unmanned Aerial System for Special Operations Forces Tactical-Level Intelligence, Surveillance, and Reconnaissance Operations

    SBC: THORPE SEEOP CORP            Topic: SOCOM172005

    A technical approach is proposed to survey the industry for state of the art capabilities in terms of the SOCOM mission requirements described in the solicitation for the Group 2 Tactical ISR UAS. The results of the survey will select a configuration of potential candidate UAS that would meet the threshold and ultimately objective goals stated.

    SBIR Phase I 2018 Department of DefenseSpecial Operations Command

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government