You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Sonobuoy Launched small UAV system

    SBC: Sensintel Inc.            Topic: N04T004

    The Navy and other government-sponsored agencies use the P-3 aircraft. Due to the diverse missions and limited number of P-3 aircraft, the most economical and expeditious way to enhance operations and assure crew safety would be to incorporate low-cost expendable tactical unmanned air vehicles (UAV's). If UAVs were incorporated into each P-3, a load-out of sonobuoy launched UAV's with interchange ...

    STTR Phase II 2005 Department of DefenseNavy
  2. A High Power Density Rotary Engine for Unmanned Aerial Vehicles

    SBC: ATS-MER, LLC            Topic: N10AT001

    In Phase I MER demonstrated the superior performance and power-to-weight ratios of the VS-Rotary engine. In Phase II MER will team with the University of Arizona who will provide engine modeling, simulation, and analysis along with advanced precision machining and fabrication. MER will also team with NCE of Tucson to provide test and systems integration development of the engine to the applicatio ...

    STTR Phase II 2014 Department of DefenseSpecial Operations Command
  3. Energy Efficient, Non-Silicon Digital Signal Processing (DSP)

    SBC: HYPRES, INC.            Topic: N17AT027

    Superconductor digital circuits, operating at very high clock speed, can directly process wideband digitized radio frequency (RF) signals. By integrating such digital processing circuitry together with superconductor analog-to-digital converters (ADCs), we propose to develop the next generation digital-RF receivers. Leveraging the recent development of multiple superconductor ADCs on the same chip ...

    STTR Phase II 2018 Department of DefenseNavy
  4. Integrated Computational Material Engineering Approach to Additive Manufacturing for Stainless Steel (316L)

    SBC: Senvol LLC            Topic: N16AT022

    The objective in this project is to implement and validate a probabilistic qualification framework that will enable additive manufacturing (AM) materials and part qualification through the use of a data-driven predictive model within a statistical framework. Senvol seeks to develop and validate a data-driven ICME probabilistic framework for assisting qualification of AM materials and parts. Phase ...

    STTR Phase II 2018 Department of DefenseNavy
  5. SIC EPITAXIAL LAYERS FOR ULTRA-HIGH VOLTAGE BIPOLAR DEVICES

    SBC: WIDETRONIX INC.            Topic: N04T029

    This program is focused on growth of thick low doped Silicon Carbide epitaxial layers suitable for ultra-high voltage (10-15 kV) SiC bipolar power devices using improved epitaxial growth chemistries and reactor design. This Phase II STTR program will focus on extending the growth rates achieved in Phase I, and to realize epitaxial layers that alleviate VF drift in SiC bipolar devices. Reactor desi ...

    STTR Phase II 2005 Department of DefenseNavy
  6. Reworkable Epoxy Bonding for Superconductor Multi-chip Modules

    SBC: HYPRES, INC.            Topic: N12AT014

    HYPRES, in collaboration with University of Arkansas (UA), proposes to develop a method for manufacturing superconductor multi-chip modules (MCMs) using nano-engineered cryogenic adhesives. A superconductor MCM comprises a carrier and several flipped chips. Before final assembly on the carrier, these chips need to be screened by temporarily attaching each one to another carrier with active test ci ...

    STTR Phase II 2014 Department of DefenseNavy
  7. Innovative Vehicle Camouflage

    SBC: Integument Technologies Inc            Topic: N03T013

    The use of painted camouflage patterns on military hardware is a time-tested, cost-effective and practical countermeasure against human vision and aided vision target acquisition systems in many combat scenarios. However, the ability to integrate advanced patterns and optical effects is inherently limited by painting techniques. By contrast, advanced reel-to-reel film processing technologies yi ...

    STTR Phase II 2005 Department of DefenseNavy
  8. Physics-based Modeling of Acoustic Reverberation in the Littoral Environment

    SBC: Marine Acoustics, Inc.            Topic: N03T011

    Underwater acoustic modeling plays an essential role in the design, development, test, and operation of sonar systems. Active acoustic clutter can increase the sonar false alert rate or equivalently decrease the probability of detection/classification, and is a key issue in the development and utility of active sonar systems. The ability to predict reverberation and clutter is inseparably tied to ...

    STTR Phase II 2005 Department of DefenseNavy
  9. Compact Conformal Arrays

    SBC: STIEFVATER CONSULTANTS            Topic: N04T006

    Multi-mission systems of the future will require antenna systems with increased aperture size to meet the challenging communications and surveillance requirements. This will include performance in severe interference situations. Planar arrays mounted on either the side, top or bottom of current airframes are impractical, if not aerodynamically unstable. Consequently, the Navy is investing in new ...

    STTR Phase II 2005 Department of DefenseNavy
  10. Development of Next-Generation Composite Flywheel Design for Shock and Vibration Tolerant, High Density Rotating Energy Storage

    SBC: MOHAWK INNOVATIVE TECHNOLOGY, INC.            Topic: N13AT022

    Under this Phase II effort, the design of a modular 60 kw (3.6 MJ) shock tolerant composite flywheel for backup/ride through power will be finalized. This composite flywheel design will make use of a novel low cost thermal press cure process to fabricate the individual composite rings used to build up the flywheel. The manufacturing process parameters used in previous hydroburst testing of initial ...

    STTR Phase II 2018 Department of DefenseNavy
US Flag An Official Website of the United States Government