You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Launch Weather Decision Support System

    SBC: Radiometrics Corporation            Topic: T1

    NASA wants a cost-effective atmospheric remote sensing system providing accurate temperature and humidity profiles to least 10 km height in clear and cloudy conditions. Radiometrics Microwave Profiler (MP) products currently provide accurate temperature and humidity profiles in good agreement with radiosondes to 3 km height. Good agreement can be extended beyond 10 km height using variational retr ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  2. uG-LilyPond- Floating Plant Pond for Microgravity

    SBC: SPACE LAB TECHNOLOGIES, LLC            Topic: T7

    Regenerative space life support will undoubtedly require food production, to recover nutrients and close the carbon loop in a spacecraft habitat. Aquatic plants have enormous potential for edible biomass production but have been little studied as potential food crops for space applications. The proposed μG-LilyPond™ is an autonomous environmentally controlled floating plant cultivation system ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  3. Highly Efficient Closed-Loop CO2 Removal System for Deep-Space ECLSS

    SBC: TDA RESEARCH, INC.            Topic: T6

    TDA Research Inc.(TDA) in collaboration with University of Puerto Rico – Mayaguez (UPRM is proposing to develop a highly efficient CO2 removal system based on UPRM proprietary strontium exchanged silico-alumino-phosphate (Sr-SAPO-34) sorbent for closed loop space craft cabin air re-vitalization during deep space missions. In the Phase I work, we successfully completed bench-scale proof-of-concep ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  4. Intelligent Power Source Reliability Monitoring and Failure Mitigation System

    SBC: ALPHACORE INC            Topic: T3

    Alphacore Inc. will develop a high-accuracy built-in self-test (BIST) system for characterization of aging, degradation, available power and in-situ diagnosis of photovoltaic and multi-pack battery systems using low-complexity single-chip impedance spectroscopy (IS) approach. Alphacore will collaborate with Arizona State University (ASU) scientists to develop a low complexity single-chip photovolt ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  5. A Supported Liquid Membrane System for Steady State CO2 Control in a Spacecraft Cabin

    SBC: REACTION SYSTEMS, INC.            Topic: T6

    Reducing the allowable concentration of carbon dioxide (CO2) in spacecraft is a critical need for NASA. The system now used on the International Space Station (ISS) is the carbon dioxide removal assembly (CDRA). While it has performed well on the ISS, managers have concluded that using the device to reach the new ppCO2 limit of 2.0 mm Hg is not practical and a new method is needed.In this projec ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  6. Bio-inspired Cellular Material Optimization for the Design of Additively Manufactured Multi-Functional Lightweight Structures

    SBC: PHOENIX ANALYSIS & DESIGN TECHNOLOGIES INC            Topic: T3

    New technologies in imaging and manufacturing, including Additive Manufacturing (AM), are opening possibilities for mimicking biological structures in a way that has been unprecedented in human history. The primary innovation proposed here is the development of a tool that generates bio-inspired, parametrically optimized cellular materials for integration into the design of Additively Manufactured ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  7. Sentient Science- A Multiscale Modeling Suite for Process and Microstructure Prediction in Metal Additive Manufacturing

    SBC: SENTIENT SCIENCE CORPORATION            Topic: T12

    In response to NASA’s topic T12.02 of “Extensible Modeling of Metallurgical Additive Manufacturing Processes”, Sentient proposes to incorporate its DigitalClone technique to develop a multiscale and multiphysics computational modeling suite to predict comprehensive outcomes from AM building processes, including geometrical accuracy, and resulting microstructure and defects. Figure 1 shows th ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  8. Femtosecond-Laser Fabrication of Waveguides in Laser Materials

    SBC: AKTIWAVE LLC            Topic: T8

    This proposal includes, for the first time, integrated theoretical models and experimental investigations to simulate and demonstrate femtosecond-laser-fabricated waveguides in crystalline dielectric materials. The numerical models will predict refractive-index changes potentially induced by self-focusing, heat accumulation, thermal stress, plasma formation and relaxation, and ablation. The influe ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  9. Validated Engineering Tools for Thin-Ply Composites

    SBC: OPTERUS RESEARCH AND DEVELOPMENT, INC            Topic: T12

    Opterus Research and Development, Inc. proposes to develop and validate multi-scale thin-ply High Strain Composites (HSCs) constitutive modeling tools for incorporation into commercial finite element analysis codes. The constitutive models will capture the time-temperature-load-deformation viscoelastic characteristics common to HSCs as well as the yielding or permanent deformation associated with ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  10. Engineering and Qualification of Thin-Ply Composites

    SBC: Roccor, LLC            Topic: T12

    This body of research focuses on developing fundamental engineering qualification methods for Thin-Ply High Strain Composites (TP-HSCs). Roccor will collaborate with NASA and Dr. Kwok of the University of Central Florida to develop and validate a robust framework for engineering the viscoelastic behavior of highly strained thin-ply composites. The material systems studied will be highly focused on ...

    STTR Phase I 2018 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government