You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. AOTF Based Spectro-Polarimetric Imaging System For Stand Off Chemical Detection

    SBC: BRIMROSE TECHNOLOGY CORP            Topic: CBD13104

    We propose an Acousto-Optic Tunable Filter (AOTF) Spectropolarimetric Imaging System for Enhanced Standoff Chemical Detection at Long Wave Infrared (LWIR) wavelengths. This work entails development of suitable LWIR material, design of the LWIR AOTF, and design of the hyperspectral imaging sensor using a focal plane array. Currently, there is no technologically mature, commercially available mater ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  2. Development of Low Cost Infrared Focal Plane Array for Passive Chemical Detection Using Colloidal Quantum Dots

    SBC: BRIMROSE TECHNOLOGY CORP            Topic: CBD13105

    We propose to develop low cost Long Wavelength Infrared Focal Plane Arrays (LWIR FPAs) using colloidal quantum dots (CQDs) of mercury telluride (HgTe). In Phase I, QDs in the size range of 20-25nm (corresponding to cutoff wavelength of 8 to 12 microns) w...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  3. Regenerable Carbon Dioxide Removal Technology Based on Novel Macroporous Ion Exchange Resins for Closed-Circuit Breathing Apparatus

    SBC: LYNNTECH INC.            Topic: CBD12106

    Currently, the United States Military encounters many scenarios where soldiers must enter hazardous areas, while maintaining isolation from contaminants such as chemical and biological agents as well as hazardous material exposure. This requires that the soldiers respiratory tract be isolated to prevent exposure to these contaminants. In order to accomplish this, the soldiers wear protective suits ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  4. Regenerable, heat-Abating, humidity-Neutralizing, Carbon diOxide Removal System (RANCOR) Phase II

    SBC: PARAGON SPACE DEVELOPMENT CORPORATION            Topic: CBD12106

    In Phase I RANCOR successfully demonstrated an innovative enabling humidity control technology to provide very low humidity air to water sensitive, fully reusable CO2 adsorbents. The use of adsorbents enables complete reusability/rechargability and reduces the total heat load on the SCBA to the point where ice or other cooling systems will no longer be required. In Phase II Paragon will introduce ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  5. A Novel Orthogonal Chaos-Based Radar Waveform with Optimized Receiver Filtering

    SBC: POC TECH GROUP LLC            Topic: MDA12002

    To achieve the goal of finding radar signal waveforms for supporting target information and deducing sensor-independent attributes, we propose to use a novel chaos-based orthogonal radar signal waveform with matched-filter-like (or adaptive) pulse compression processing for improving target detection. An open-source-and open-architecture prototype platform is proposed to enable performance analys ...

    SBIR Phase II 2014 Department of DefenseMissile Defense Agency
  6. Innovative Designs for Reliable Electro-Explosive Ordnance Devices

    SBC: SEACORP, LLC            Topic: MDA12031

    Missiles, use electro-explosive devices (EEDs) to perform mulitple functions during operation. This effort seeks ways to improve on the EED"s reliability and lower the failure or inadvertent activation rate of these devices. During Phase I, SEA CORP investigated replacing EEDs with commercial off the shelf (COTS) automotive airbag inflators to perform the required pneumatic functions of variou ...

    SBIR Phase II 2014 Department of DefenseMissile Defense Agency
  7. Advanced Techniques for Lossless Compression of Target Vehicle Telemetry

    SBC: BATTLEFIELD TELECOMMUNICATIONS SYSTEMS, LLC            Topic: MDA12012

    Battlefield Telecommunications Systems proposes to build low delay low complexity lossless compression software framework and hardware prototype to be integrated in the telemetry system of a target vehicle test bed. The proposed compression algorithm is specially designed for target vehicle telemetry data, designed to reduce the dataset redundancy through the prediction by extracting the characte ...

    SBIR Phase II 2014 Department of DefenseMissile Defense Agency
  8. Modeling and Simulation (M&S) Uncertainty Quantification Using an Ant Swarm Model

    SBC: PRIME SOLUTIONS GROUP, INCORPORATED            Topic: MDA12T007

    STTR Phase I Uncertainty Quantification (UQ) technical feasibility demonstration using advanced mathematical techniques and Biologically Inspired Computing Architecture (BICA) concepts is proposed for Phase II prototype development. UQ in complex System of Systems (SoS) M & S environments is emphasized in Phase II. Graph theory based M & S techniques are explored that enhance and facilitate topi ...

    STTR Phase II 2014 Department of DefenseMissile Defense Agency
  9. High Gain and Frequency Ultra-Stable Integrators for ICC and Long Pulse ITER Applications

    SBC: EAGLE HARBOR TECHNOLOGIES, INC.            Topic: 69d

    Inductive pickup loops are one of the primary magnetic diagnostics in modern fusion concepts. To convert the voltage measurement from the inductive pickup loop to a measurement of magnetic field, the loop voltage must be integrated. While simple in principle, in practice several factors make the integration difficult, especially when there are large scale differences between the fast and slow magn ...

    SBIR Phase II 2014 Department of Energy
  10. A Low-Cost Hybrid Ultrasonic-Radio Frequency (RF) Sensor System for Characterization of Composite Materials

    SBC: X-Wave Innovations, Inc.            Topic: MDA12011

    X-wave Innovations, Inc. (XII) along with Iowa State University (ISU), is developing a low-cost, hybrid ultrasonic-radio frequency (RF) sensor (HURFS) nondestructive evaluation (NDE) system to assess most structural issues while simultaneously providing feedback on the layer thickness and RF properties of composite, non-conductive materials in multi-layer stacks. The HURFS approach combines the u ...

    SBIR Phase II 2014 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government