List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Powerful Source of Collimated Coherent Infrared Radiation with Pulse Duration Fewer than Ten Cycles

    SBC: NP Photonics, Inc.            Topic: A14AT006

    Few-cycle mid-infrared lasers are in high demand for a variety of practical applications including remote sensing of chemical and biological species. NP Photonics and the University of Arizona propose to develop a wavelength tunable and power-scalable optical parametric laser system covering 8-10 micron and capable of producing collimated few-cycle pulses with pulse energy > 100 microjoules. A ful ...

    STTR Phase II 2015 Department of DefenseArmy
  2. Implementing the Daylight Object Restoration Algorithm for Imaging in Daylight and Strong Turbulence

    SBC: Hart Scientific Consulting International LLC            Topic: AF103017

    ABSTRACT:A new algorithm, the Daylight Object Restoration Algorithm (DORA), has been developed. DORA includes a novel implementation of the multi-frame blind deconvolution image restoration concept which recovers high-quality object estimates from sequences of degraded images. DORA removes the effects of atmospheric aberration in images recorded at ground-based telescopes, and is designed to opera ...

    SBIR Phase II 2015 Department of DefenseAir Force
  3. DLA152-001

    SBC: Response Technologies, LLC            Topic: DLA152001

    The DoD uses flexible fuel bladders in multiple air, ground, and sea vehicles because: 1) they easily fit into almost any space, 2) they are corrosion proof, and can often be self-sealing and explosion proof, 3) they allow for customized placement of fittings and connection points, 4) they collapse as they empty, thereby eliminating the need for venting and minimizing fuel sloshing and its associa ...

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency
  4. Inducing Known, Controlled Flaws in Electron Beam Wire Fed Additive Manufactured Material for the Purpose of Creating Non-Destructive Inspection Stand

    SBC: ATS-MER, LLC            Topic: N152092

    To induce controlled defects in wire feed E-Beam additive manufacturing for making NDT standards, MER will work with Applied Optimization (AO) to develop a Physics based ICMSE based process model of defect formation which captures the influence of closed loop control parameters of power, build temperature, wire feed rate and deposition path. This model will be verified by experiment on a closed lo ...

    SBIR Phase I 2015 Department of DefenseNavy
  5. Advanced Manufacturing Technologies

    SBC: ADVANCED CERAMICS MANUFACTURING, LLC            Topic: DLA152001

    A new approach to manufacturing is needed to streamline the logistics of maintaining legacy aircraft. Recently, Advanced Ceramics Manufacturing (ACM) developed a water soluble tooling technology (FastCore) that can reduce the cost of Fiber Reinforced Plastics (FRP) composite components. The FastCore family of products allows ACM to rapidly create water soluble mandrels for composite manufacturer ...

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency
  6. Online parenting program to prevent youth drug abuse and mental health problems

    SBC: Family Transitions- Programs that Work, LLC            Topic: NICHD

    DESCRIPTION provided by applicant The goal of this proposal is to develop and assess the feasibility of an internet adaptation eNBP of the New Beginnings Program NBP an evidence based program to promote effective parenting following divorce The NBP is a week small group program that has been shown in two randomized trials to significantly reduce a wide range of youthsandapos problems ...

    SBIR Phase I 2015 Department of Health and Human ServicesNational Institutes of Health
  7. Pre-IND study of PMT-254, a pan-FLT3 inhibitor for the treatment of FLT3 driven cancers.

    SBC: PROMUTECH PHARMACEUTICALS, INC.            Topic: 102

    DESCRIPTION provided by applicant Pathological activating mutations in the FLT kinase represent the most common genetic alteration in patients with acute myeloid leukemia AML occurring in approximately one third of cases Recently we performed translational studies that identified drug resistant kinase domain mutations in FLT ITD at the time of relapse in AML patients treated with the FLT ...

    STTR Phase I 2015 Department of Health and Human ServicesNational Institutes of Health
  8. Laser/Microwave Energy Deposition to Improve Control/Performance of High Speed Vehicles

    SBC: Physics, Materials, and Applied Mathematics Research L.L.C.            Topic: AF103009

    ABSTRACT:In this effort, we will couple the energy of focused microwave bursts into the air and onto surfaces by first forming a laser plasma. The presence of the laser plasma allows much lower microwave intensities to couple their energy to the laser-pre-ionized surface or air- volume, allowing more efficient energy-transfer and the use of lower-power microwave systems to achieve the desired effe ...

    SBIR Phase II 2015 Department of DefenseAir Force
  9. Robust Mid-IR Optical Fibers

    SBC: AdValue Photonics Inc            Topic: AF15AT02

    ABSTRACT: The development of mid-infrared (Mid-IR) transparent fibers having low propagation loss in the wavelength range 2-5 micron, robust mechanical properties, low temperature sensitivity and high laser power delivery capability has been investigated extensively in the last decade. Chalcogenide glass fibers, fluoride glass fibers, tellurite glass fibers, and microstructured silica fibers have ...

    STTR Phase I 2015 Department of DefenseAir Force
  10. Lithium Ion / Super Capacitor Hybrid System

    SBC: Electro Standards Laboratory, Inc.            Topic: A15AT010

    A hybrid lithium ion battery / super capacitor energy storage device is developed that uses the high power capability of the super capacitor to satisfy pulsed power load requirements such that stress on the lithium ion batteries is reduced. This results in extended discharge time and higher efficiency utilization of the battery stack.

    STTR Phase I 2015 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government