Award Data

ADVANCED COMPOSITES HAVE POTENTIAL FOR EFFECTING WEIGHT SAVINGS AND PROVIDING CORROSION RESISTANCE TO A VARIETY OF MILTARY APPLICATIONS. THE MK112 ASROC LAUCHER MODS 1-8 AND GUIDE, ES114, HAVE BEEN IDENTIFIED AS HAVING EXPERINECED CORROSION AND WEIGHT PROBLEMS. THERE ARE A VARIETY OF RESINS AND FIBERS AVAILABLE FOR USE AS STRUCTURAL MATERIALS THESE INCLUDE GLASS, KEVLAR & CARBON FIBERS,AND POLYEST ...

ABARIS PROPOSES A DEVELOPMENT EFFORT TO RESEARCH THE PROBLEM AND CONCEPTUALIZE AN EXPERT SYSTEM TOOL FOR JOB AIDING OF THE REPAIR OF ADVANCED COMPOSITE AIRCRAFT STRUCTURE. THE SYSTEM WOULD CONSIST OF EXPERT SYSTEMS SOFTWARE, KNOWLEDGE OF AIRCRAFT COMPOSITE DESIGN, INSPECTION, AND REPAIR TECHNIQUES, STRUCTURAL ANALYSIS TOOLS, COMPUTER AIDED DESIGN ENGINEERING DATA BASE, AND VIDEO DATA STORAGE SYSTE ...

THE U.S. NAVY HAS A NEED FOR LOW COST EXPENDABLE FUEL TANKS FOR USE BY CARRIER AIRCRAFT THAT OCCUPY THE MINIMUM STORAGE SPACE. ABARIS PROPOSES TO CONDUCT AN EXPLORATORY DEVELOPMENT OF THE FABRICATION OF TANKS OF ADVANCED COMPOSITE MATERIALS. TWO CONCEPTS ARE PROPOSED. ONE USES LONGITUDINAL JOINTS OR SPLICES AND WOULD USE EITHER A BLADDER TANK OR A "WET-SKIN" STRUCTURE. THE OTHER USES CIRCUMFERENTI ...

ABARIS PROPOSES TO DEVELOP A PORTABLE EXPERT SYSTEM THAT WILL AID THE FIELD OR ORGANIZATIONAL TECHNICIAN IN THE INTERPRETATION OF ULTRASONIC NON-DESTRUCTIVE INSPECTION FOR THE DETERMINATION OF THE SCOPE, MAGNITUDE, AND IMPACT OF INTERNAL DAMAGE TO COMPOSITE LAMINATE STRUCTURE. ONE OF THE MAJOR PROBLEMS FACING THE AIR FORCE IS THE IMPACT OF NEW ADVANCED COMPOSITE STRUCTURAL MATERIALS ENTERING OPERA ...

A major obstacle for BMD systems to the introduction of new structures and designs using high-performance composites is the time and cost of the tooling required both to prototype and test new components and to transfer accepted designs to manufacturing.The development of reformable, reusable tooling based on 2Phase Technologies' patented state-change materials will reduce the time, cost and effor ...

An innovative tunable vibration absorber (TVA) concept was developed in the Phase I feasibility study. This design was selected among others to be developed in full scale in Phase II and Phase II Option based on a detailed theoretical modeling, smallprototype test results, and a cost analysis, which were conducted in Phase I.In Phase II and Phase II Option a new generation of TVA utilizing a clas ...

An innovative tunable vibration absorber (TVA) concept was developed in the Phase I feasibility study. This design was selected among others to be developed in full scale in Phase II and Phase II Option based on a detailed theoretical modeling, smallprototype test results, and a cost analysis, which were conducted in Phase I.In Phase II and Phase II Option a new generation of TVA utilizing a clas ...

A study of the application for a visible light camera based on placing a Delta Sigma modulator at each pixel to provide per pixel A/D showed the potential for superior performance compared to alterate APS designs. It was demonstrated that substantiallyhigher fill factor and smaller pixel size could be achieved using common CMOS technology. Well capacity and linearity of the sensor were also shown ...

ARBUS, INC., WILL EXPLORE THE FEASIBILITY OF, AND SUBSEQUENTLY DEVELOP, A COMPUTERIZED PHARMACEUTICAL TRACKING SYSTEM FOR INVESTIGATIONAL DOSAGE FORMS. DURING PHASE I, ARBUS PERSONNEL WILL FULLY DEFINE WHAT PRODUCT DOCUMENTATION IS REQUIRED AND WHAT METHOD IS PREFERRED FOR THE SYSTEM USERS TO INTERACT WITH THE PROPOSED SYSTEM. KEY DEVELOPMENT DOCUMENTATION WILL BE DRAFTED CLARIFYING THE COMPUTER H ...

To reach the objectives of new and innovative technologies and architectures for phased array radar system development, ionized gas plasma antennas (GPA) and waveguides may be effective. GPA approaches such as windowing to reduce back and side lobes,increase radiation efficiency and provide rapid reconfigurability would support new revolutionary radar designs. Plasma waveguides would decrease the ...