You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Advanced Methods and Software for Broadband Signal Processing

    SBC: INSIGHTFUL CORPORATION            Topic: N/A

    Broadband signal processing is important for interpreting signals received from active sonar transmissions. The traditional approach to processing broadband signals in the sonar literature is to assume a harrowband condition that Justifies the use of narrowband signal processing. RTcently there has been renewed interest in avoiding the narrowband assumption and in actually using techniques th ...

    SBIR Phase I 1996 Department of DefenseNavy
  2. Advanced Nonlinear and Hybrid Systems Control Technology

    SBC: Sagent Corp            Topic: N/A

    This small business innovative research phase I project from Sagent Corporation addresses the need to develop and demonstrate high-performance nonlinear, adaptive, and hybrid systems cdontrol technology for precision multi-target, multi-platform fire-on-the-move applications including armor, air defense and aircraft system applications. Reliance on incremental improvements in linear, fixed-point ...

    SBIR Phase I 1996 Department of DefenseArmy
  3. A Real-Time, High-Resolution Sensor for Bond Integrity and Thermal Conductivity

    SBC: Waterjet Technology Inc            Topic: N/A

    Dense, high-performance electronic systems employ advanced substrate materials, such as ceramics, for maximum heat dissipation. During the fabrication of these ceramic packages various thick-film and thin-film materials are bonded to the substrate and subsequently serve as circuit paths and attachment points for the integrated circuit die. Rapid, high-resolution bond integrity measurements must ...

    SBIR Phase I 1996 Department of DefenseArmy
  4. A UHP Waterjet System for coke removal in jet engine fuel tubes

    SBC: Quest Integrated, LLC            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseAir Force
  5. Automated 3-D Acoustic Stability,/ Grain Design Analysis

    SBC: Software And Engineering Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseNavy
  6. Compact, High Pulse Rate, Mid-Infrared laser

    SBC: Aculight Corporation            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseNavy
  7. CW Mid-Infrared Tandem OPO Source

    SBC: Aculight Corporation            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseAir Force
  8. Dev and Validation of a Prototype Field-Portable Intrinsic Bioremediation Test Kit with Data Analysis Software Pkg

    SBC: Agi Technologies            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseAir Force
  9. Development of a Fiber-Optic Gas Bearing-Balance

    SBC: Waterjet Technology Inc            Topic: N/A

    A one degree of freedom high-frequency aerodynamic bearing-balance will be developed for force, moment, and orientation measurements under non-steady-state flight conditions. A cylindrical bearing-balance three inches in diameter using displacement sensing will be considered as the best candidate for the design. To satisfy the requirement for achieving a natural frequency of 800Hz, the balance m ...

    SBIR Phase I 1996 Department of DefenseAir Force
  10. Diode Pumped Solid State Laser Technology

    SBC: EWING TECHNOLOGY ASSOC., INC.            Topic: N/A

    The proposed effort develops a novel laser geometry using a new solid state laser material with the objective of providing very high power capability with superlative beam quality and efficiency for BMD0 tracking, laser imaging, and ultimately directed energy weapons potential. The material, Yb:S-FAP, has been shown to have excellent efficiency potential and uses fewer diode pumping bars compared ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government