You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. AN EXPERT SYSTEM OPERATOR AID FOR NUCLEAR POWER PLANT MANEUVERS

    SBC: Applied Research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of Energy
  2. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The pressing need exists within industry to accurately measure high aspect ratio microscale structures. For example, diesel injector nozzles are manufactured with microscale holes ranging from 50-200 micrometers in diameter and 3-5 mm depths. One fundamental challenge is to nondestrucvely measure these features in order to validate models, enhance manufacturing processes, and reduce fuel emissions ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  3. DIGESTIVE ENZYME SUPPLEMENTS TO INERT FEEDS FOR SMALL-EGG FISH LARVAE

    SBC: International Aquaculture Res            Topic: N/A

    INADEQUATE STARTER FEEDS SEVERELY HOLD BACK NEW AQUACULTURE ENTERPRISES SUCH AS PRESENT ATTEMPTS TO RAISE FISHES WHOSE LARVAE DEVELOP FROM SMALL EGGS AND HAVE VERY "DIFFICULT" FOOD REQUIREMENTS. INERT LARVAL FEEDS HAVE NOT SUCCESSFULLYELIMINATED THE STRICT DEPENDENCY ON NATURAL FORAGE DURING THE CRITICAL POST-LARVAL STAGE AFTER YOLK ABSORPTION AND BEFORE THE DEVELOPMENT OF A DIGESTIVE SYSTEM WITH ...

    SBIR Phase I 1987 Department of Commerce
  4. Handheld Photoacoustic Chemical Agent and Toxic Industrial Material Detector

    SBC: MANNING APPLIED TECHNOLOGY            Topic: CBD05112

    Manning Applied Technology proposes to develop a handheld infrared spectrometer, ideally suited to detection of airborne chemical agents at and below permissible exposure limits. This approach offers unmatched sensitivity and specificity for detection of all types of chemical vapors. The instrument is modular, rugged, compact and highly sensitive. Volume pricing will be less than $1000 each. ...

    SBIR Phase I 2005 Department of DefenseOffice for Chemical and Biological Defense
  5. Low Cost Carbon Fiber Composites for Lightweight Vehicle Parts

    SBC: MATERIAL INNOVATIONS, INCORPORATED            Topic: 27

    78845S The Department of Energy desires to increase fuel efficiency by reducing vehicle weight. Carbon fiber composites offer one promising way to do this, but difficulties in building economical, consistent, high quality preforms has limited the introduction of this material. This project will to adapt a well established pulp molding technology to produce carbon fiber preforms for lightweight ...

    SBIR Phase I 2005 Department of Energy
  6. A Robust Microfabricated Specimen Support with Integrated Capabilities for In-Situ Experimentation in the Transmission Electron Microscope

    SBC: Protochips, Inc.            Topic: 23

    79454S Despite advances in modern electron optics, which have permitted observation with unprecedented resolutions, most materials science research involves the quantification of static properties of materials. This is mostly due to limitations in modern day equipment and the time and cost associated with modifying existing microscopes. Consequently a need exists to extend the current ability t ...

    SBIR Phase I 2005 Department of Energy
  7. Reliable High Performance Carbon Nanotube and LaB6 Nanowire Field Emission Cathodes for STEM

    SBC: XINTEK, INC.            Topic: N/A

    79658B The reliable fabrication of high performance point electron sources is required for scanning transmission electron microscopy (STEM) systems with brightness greater than 109 Amp/cm2/steradian at an extraction voltage of 100 kV. Conventional point sources require a high vacuum for stable operation, and tip failure occurs by vacuum arcing and unstable emission due to atom migration. This p ...

    SBIR Phase I 2005 Department of Energy
  8. Reliable High Performance Carbon Nanotube and LaB6 Nanowire Field Emission Cathodes for STEM

    SBC: XINTEK, INC.            Topic: 23b

    79658B The reliable fabrication of high performance point electron sources is required for scanning transmission electron microscopy (STEM) systems with brightness greater than 109 Amp/cm2/steradian at an extraction voltage of 100 kV. Conventional point sources require a high vacuum for stable operation, and tip failure occurs by vacuum arcing and unstable emission due to atom migration. This p ...

    STTR Phase I 2005 Department of Energy
US Flag An Official Website of the United States Government