You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. High Fidelity Multi-Mode Hyperspectral Multispectral Imager with Programmable Spectral Resolution

    SBC: KENT OPTRONICS INC            Topic: S304

    This SBIR Phase II proposal introduces a fast multi-mode hyperspectral-multispectral (MM-HS-MS) sensor with programmable spectral resolution. The sensor brings the following long-waiting benefits to the remote sensor community: (i) switchable between HS and MS operations, (ii) variable spectral resolution from 10nm to 560 nm; (iii) fast frame rate (54-1,750Hz), (iv) short full spectral range data ...

    SBIR Phase II 2009 National Aeronautics and Space Administration
  2. Collective Protection for Military Working Dogs

    SBC: AGAVE BIOSYSTEMS INC.            Topic: CBD08103

    Shelter enclosures for military working dogs in the event of a CB attack is a technology gap identified by the Joint Requirements Office. Important parameters to consider in the design of protective enclosures include low weight and size to minimize transport requirements; rapid setup; and accommodation of canine physiological and psychological comfort needs while providing protection against CB ...

    SBIR Phase II 2009 Department of DefenseOffice for Chemical and Biological Defense
  3. SiC Avalanche Photodiodes and Arrays

    SBC: Aymont Technology, Inc.            Topic: S105

    In this Phase 2 SBIR program submitted to National Aeronautics and Space Administration (NASA) in response to Topic S1.05 (Detector Technologies for UV, X-Ray, Gamma-Ray and Cosmic-Ray Instruments), Aymont Technology, Inc. (Aymont) and GE Global Research will enable high-sensitivity ultraviolet imaging. We will build upon our Phase 1 result showing working SiC UV avalanche photodiodes with high q ...

    SBIR Phase II 2009 National Aeronautics and Space Administration
  4. A ROBUST & MANUFACTURABLE ALTERNATOR & SUSPENSION FOR FREE PISTON STIRLING ENGINES

    SBC: CLEVER FELLOWS INNOVATION CONSORTIUM            Topic: N/A

    THIS PROJECT INVESTIGATES A COMPOUND, FLEXURE SUSPENSION ANDSPIN-PROHIBITED ALTERNATOR GEOMETRY FOR FREE-PISTON, STIRLING-ENGINE POWER CONVERSION. THE SYSTEM APPEARS TO OFFER MAJOR IMPROVEMENTS IN RELIABILITY, MASS AND SIZE, AND MANUFACTURING COST. THE PROJECT WILL PROVIDE A DESIGN AND LIFE TEST FOR THE SUSPENSION SYSTEM AND A COMPLETE CONCEPTUAL-PRELIMINARY DESIGN OF THE ASSOCIATED ALTERNATOR. CU ...

    SBIR Phase II 1992 National Aeronautics and Space Administration
  5. A METHOD OF IMPROVING THE DYNAMIC PERFORMANCE OF TELEROBOTICS SYSTEMS

    SBC: Convolve Inc.            Topic: N/A

    THE OBJECTIVE OF THIS PROJECT IS TO DEVELOP AN APPROACH THATCOMMANDS TELEROBOTS TO MOVE WITH GREATLY INCREASED DYNAMIC PERFORMANCE. THIS PERFORMANCE INCREASE WILL BE ACHIEVED BY ELIMINATING THE EXCITATION OF OSCILLATIONS IN THE MACHINE. SETTLING TIME, THEREFORE, WILL BE SIGNIFICANTLY REDUCED. THE FEASIBILITY OF A NEW TECHNIQUE CALLED IMPULSE SHAPING WILL BE INVESTIGATED. A RUDIMENTARY VERSION OF T ...

    SBIR Phase II 1992 National Aeronautics and Space Administration
  6. A FULL RESOLUTION AUTOSTEREOSCOPIC DISPLAY WITH HOLOGRAM-LIKE "LOOK AROUND" AND A WIDE VIEWING ZONE

    SBC: Dimension Technologies Inc.            Topic: N/A

    THE PHASE I PLAN IS TO BUILD A PROOF-OF-CONCEPT MODEL FOR A FULL-RESOLUTION, AUTOSTEREOSCOPIC LCD DISPLAY. IT WILL USE A SUPER-FAST, FERROELECTRIC LCD IN COMBINATION WITH AN INNOVATIVE FLAT-PANEL, LCD-BASED AUTOSTEREOSCOPIC THREE-DIMENSIONAL DISPLAY TECHNOLOGY THAT REQUIRES NO GLASSES. TWO IMPORTANT FEATURES WILL BE IMPLEMENTED: AN EXPANDED VIEWING ZONE AND A HOLOGRAM-LIKE "LOOK-AROUND" CAPABILITY ...

    SBIR Phase II 1992 National Aeronautics and Space Administration
  7. DEVELOPMENT OF AN ACTIVE FLUOROMETER FOR MEASURING PRIMARY PRODUCTIVITY IN THE OCEANS

    SBC: G Miller Machine Co Inc.            Topic: N/A

    AN ACTIVE FLUOROMETER USING A CONTAINED LIGHT SOURCE WILL BE DEVELOPED FOR RAPID MEASUREMENTS OF PRIMARY PRODUCTIVITY OF MARINE PHYTOPLANKTON IN SITU. THE FLUOROMETER CAN BE USED AS A WATER-PROFILING INSTRUMENT ON BOARD SHIP, OR AS A SELF-CONTAINED DEVICE ON MOORED OR DRIFTING BUOYS. THE INSTRUMENT WILL PERMIT PRECISE ESTIMATES OF OCEAN PRIMARY PRODUCTIVITY, BETTER UNDERSTANDING OF THE ENVIRONMENT ...

    SBIR Phase II 1992 National Aeronautics and Space Administration
  8. QUICK LOOK MODAL TESTING OF FLEXIBLE STRUCTURES

    SBC: Garman Systems Inc.            Topic: N/A

    AN INNOVATIVE, MODAL-TEST ANALYSIS TECHNIQUE FOR SUCCESSFUL GROUND TESTING OF LARGE, PRECISION SPACE STRUCTURES WILL BE INVESTIGATED. TRADITIONAL APPROACHES TO MODAL TESTING ARE HAMPERED BY THE OVERWHELMING AMOUNT OF DATA THAT MUST BE ACQUIRED, STORED, AND ANALYZED FOR THESE LARGE, FLEXIBLE STRUCTURES, WHICH REFLECTS DIRECTLY ON TESTING COSTS AND TIME. THE APPLICATION OF DATA-COMPRESSION PRINCIPLE ...

    SBIR Phase II 1992 National Aeronautics and Space Administration
  9. SASSI: Subsystems for Automated Subsurface Sampling Instruments

    SBC: Honeybee Robotics, Ltd.            Topic: S503

    Autonomous surface sampling systems are necessary, near term, to construct a historical view of planetary significant events; as well as allow for the identification of materials useful for ISRU activities. Paramount to this is exploration missions capable of in-situ analysis of core samples that deliver the stratigraphy of the target. These sample handling technologies must be developed to meet a ...

    SBIR Phase II 2009 National Aeronautics and Space Administration
  10. Dust-Tolerant, Reusable Connection Mechanism for Lunar Environments

    SBC: Honeybee Robotics, Ltd.            Topic: X704

    Lunar dust has been identified as a significant and present challenge in future exploration missions. Significant development is called for in the area of devices and structures that tolerate or mitigate the presence of Lunar dust. Honeybee Robotics Spacecraft Mechanisms Corporation (SMC) seeks to develop methods for mitigating dust accumulation on reusable connection mechanisms, such as will be n ...

    SBIR Phase II 2009 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government