You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. LureID: A Scalable, Highly Accurate Anti-Phishing Filter

    SBC: ATC-NY, Inc.            Topic: OSD10IA3

    Phishing is an increasing danger to the military and other organizations that must prevent information leakage. Targeted phishing (spear-phishing) and even regular phishing attempts evade regular spam detectors because phishing attacks are designed to loo

    SBIR Phase I 2010 Department of DefenseArmy
  2. Fusing Macro and Micro Material Characteristics to Enhance Fatigue Life Prediction Accuracy for Spiral Bevel Gears

    SBC: Impact Technologies            Topic: A10169

    Given the criticality of gears in the main and tail-rotor drivetrains for rotorcrafts, there is a need for robust life prediction tool that will provide improved design guidance, provide current health assessment as well as provide prognostics capabilities to support CBM initiatives at the Army. Typically, drivetrain for the main rotor uses a combination of spur gears and spiral bevel gears. The ...

    SBIR Phase I 2010 Department of DefenseArmy
  3. Fatigue Crack Initiation Prediction Tool for Rotorcraft Spiral Bevel Gears

    SBC: Sentient Science Corporation            Topic: A10169

    Current life prediction methods, such as AGMA, are empirical-based, deterministic in nature and cannot consider the effects of gear manufacturing processes, material microstructure and lubrication on fatigue strength. The estimated life is as good as the information entered by the user and it requires considerable design, manufacturing and field experience. In addition, current methods cannot take ...

    SBIR Phase I 2010 Department of DefenseArmy
  4. Inexpensive Large Scale Manufacturing of High Specific Modulus and Strength Ceramic Fibers

    SBC: Free Form Fibers L.L.C.            Topic: A10062

    This ARMY SBIR Phase I project will determine the best opto-mechanical approach for massively parallel Laser Chemical Vapor Deposition of ceramic fibers by building on work already performed at RPI, Univ of Montreal, and Free Form Fibers (FFF). Ceramic fibers are typically produced using polymeric precursors, which means that stoichiometrically pure fibers are almost impossible to attain, limiting ...

    SBIR Phase I 2010 Department of DefenseArmy
  5. Electrically-Pumped III-Nitride Intersubband lasers

    SBC: KYMA TECHNOLOGIES, INC.            Topic: SB082049

    Kyma Technologies, a leading supplier of low defect density GaN substrates, is teamed together with the three subcontractors at Princeton University, Lehigh University and Purdue University where some of the best lattice-matched quaternary (In,Ga,Al)N or ternary structures in the world have been produced, to propose the development of the world¡¦s first high-performance III-N quantum cascade las ...

    SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency
  6. Innovative Polarized Navigation Reference

    SBC: OMNITEK PARTNERS LLC            Topic: A10043

    The primary objective of this project is to study the feasibility of an innovative method of providing adaptive polarized RF reference sources for establishing a battlefield position and orientation referencing system over the battlefield. Such referencing sources are intended to be used onboard weapons platforms, UAVs, handheld devices and the like. The referencing system can then be used by pola ...

    SBIR Phase I 2010 Department of DefenseArmy
  7. UV/Vis Low-Dispersion Confocal Objective

    SBC: H NU Photonics LLC            Topic: SB102001

    A detailed design is proposed to compare one and two mirror, parabolic and aspheric optics to achieve high numerical aperture, high-throughput, sub-micron resolution from 200 to 800 nanometers. An optimization phase will follow for the concept(s) that best satisfy the requirements. Predicted performance will be analyzed for the selected concepts including evaluation of point spread function, mod ...

    SBIR Phase I 2010 Department of DefenseDefense Advanced Research Projects Agency
  8. Aerodynamic Drag and Lift Characteristics for Irregularly-Shaped Intercept Fragments

    SBC: Corvid Technologies LLC            Topic: MDA07016

    Corvid Technologies is pleased to offer this SBIR Phase II proposal. In the proposed effort, we will extend the high-fidelity analysis processes demonstrated during Phase I to generate large-scale, production-quality databases for intercept debris fragments. Our approach utilizes an innovative combination of high-fidelity computational fluid dynamics for a broad range of flow conditions, high-pe ...

    SBIR Phase II 2010 Department of DefenseMissile Defense Agency
  9. A Proactive Countermeasure to Harden Integrated Circuits Against Exploitation

    SBC: Computer Measurement Laboratory, LLC            Topic: OSD10IA1

    We propose to implement a novel countermeasure against the exploitation of integrated circuit hardware. The proposed countermeasure is applicable to both FPGAs and ASICs, increases design obfuscation and promises to block embedded hardware exploits. It also is fully compatible with virtually any other hardware exploit countermeasure and reduces forensic costs when exploits are suspected. The propo ...

    SBIR Phase I 2010 Department of DefenseAir Force
  10. Revolutionary Advances in Large-Scale Manufacturing in Quantities of One

    SBC: STEP TOOLS, INC            Topic: SB102005

    The National Simulation Service will be easy to use, universally available simulator for manufacturing processes. The service will show how products are manufactured using different machines, different cutting tools and different fixtures. The service will allow changes to be made to a product, its process and its resources until it is deemed correct by the user. The service will be freely availab ...

    SBIR Phase I 2010 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government