You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Self-Decontaminating Textiles

    SBC: Luna Innovations Incorporated            Topic: CBD161001

    Luna Innovations is addressing the need to develop novel fluid repellent textile treatments for military uniforms that will repel and actively decontaminate chemical and biological warfare agents (CBWA). There have been recent significant advances in textile treatments that have demonstrated water, oil and chemical agent resistance that are superior to Quarpel repellent treatments currently used o ...

    SBIR Phase II 2019 Department of DefenseOffice for Chemical and Biological Defense
  2. Small Filament Wound Lightweight Missile Defense Interceptor Shielding Structures

    SBC: Nanosonic Inc.            Topic: MDA18006

    During Phase I, NanoSonic produced structural shielding composites based on additively manufactured filament wound lightweight (< 0.4 g/cc) graded atomic number (Z) constituents. Such composites demonstrated Electromagnetic Interference (EMI) Shielding Effectiveness (SE) of -105 dB over 2 – 20 GHz and radiation durability upon exposure equivalent to 50-year simulated low-Earth-orbit (LEO) space ...

    SBIR Phase II 2019 Department of DefenseMissile Defense Agency
  3. Techniques for Real-time Hypervelocity Projectile fly-out Generation and Optimization

    SBC: Vadum, Inc.            Topic: MDA18002

    Vadum has demonstrated the Optimal Advanced Hypervelocity Projectile (HVP) Trajectory System (OATHS) which increases the performance of the HVP by optimizing HVP trajectory to its target. OATHS was prototyped and tested using an in-house MATLAB-based combat system development environment. The results of Phase I testing show that OATHS can feasibly increase HVP probability of kill or reduce the tot ...

    SBIR Phase II 2019 Department of DefenseMissile Defense Agency
  4. RADIO FREQUENCY TRANSPARENT, NANOPOROUS CERAMIC MATRIX COMPOSITE TPS MATERIALS FOR MISSILE STRUCTURES

    SBC: Nanosonic Inc.            Topic: MDA17013

    Through its Phase I MDA SBIR program, NanoSonic designed and empirically optimized next-generation polymer derived ceramic thermal protection systems with tailored radio frequency (RF) transparency for missile structures. High temperature flame impingement testing revealed optimized TPS materials readily endured 1,000 C flame impingement for over 60-minutes while preserving the integrity and RF re ...

    SBIR Phase II 2019 Department of DefenseMissile Defense Agency
  5. Resource Utilization Prediction and Planning for Complex Simulations

    SBC: SimVentions, Inc.            Topic: MDA17002

    The Resource Utilization Prediction/Planning Analysts' Resource Tool (RUPART) described in this proposal offers the benefits of improved simulation integration capabilities through identification of potential simulation bottlenecks in the message processing either at the system level and/or at the hardware and network levels before the simulation is even run. This will give system integrators and ...

    SBIR Phase II 2019 Department of DefenseMissile Defense Agency
  6. INFRARED SENSOR AND IMAGING SYSTEM

    SBC: EMPIRICAL TECHNOLOGIES CORPORATION            Topic: N/A

    N/A

    SBIR Phase II 1992 Department of DefenseMissile Defense Agency
  7. MECHANICAL PROPERTIES OF METAL-VOID COMPOSITES

    SBC: Fairfax Materials Research,            Topic: N/A

    MATERIALS FOR FUTURE TECHNOLOGIES MUST BE STRONG, TOUGH AND LIGHT. A GENERIC IMPROVEMENT IS OFFERED BY METAL-VOID COMPOSITES HIPED FROM NANOSCALE POWDERS, WITH GAS-PRESSURIZED VOID CONTENT OF 10-30%. STRENGTH TO WEIGHT RATIOS AND STRENGTHS ARE WELL ABOVE THOSE FOR CONVENTIONAL MATERIALS. HIGH TEMPERATURE STRUCTURAL STABILITY, RESISTANCE TO DISLOCATION, GRAIN BOUNDARY AND CRACK PROPAGATION, AND EXC ...

    SBIR Phase II 1992 Department of DefenseMissile Defense Agency
  8. CERAMIC INSULATORS FOR PULSED ELECTROTHERMAL DISCHARGES GTD-43

    SBC: Gt-devices Inc            Topic: N/A

    HIGH POWER ELECTROTHERMAL DISCHARGE TECHNOLOGY PROVIDES AN ATTRACTIVE APPROACH FOR ACCELERATING SDI KEW PROJECTILES AND FOR SDI SPACE PROPULSION. STORED ENERGY IS USED TO HEAT SUITABLE PLASMA MATERIALS IN A LARGE L/D TUBE ON MICROSECOND TIME SCALES, CREATING A HIGH PRESSURE,LOW MOLECULAR WEIGHT JET. REPETITIVE OPERATION OF THESE JETS REQUIRESDEVELOPMENT OF A HIGH STRESS INSULATOR, RESISTANT TO THE ...

    SBIR Phase II 1987 Department of DefenseMissile Defense Agency
  9. UNCOOLED INFRARED FOCAL PLANE ARRAYS BY USE OF NON-CONTACT ELECTRICAL INTERCONNECT

    SBC: Skw Corp            Topic: N/A

    N/A

    SBIR Phase II 1992 Department of DefenseMissile Defense Agency
  10. STUDY OF ION MASS EFFECTS ON LONG CONDUCTION TIME PLASMA OPENING SWITCHES USING RESONANT DIAGNOSTIC TECHNIQUES

    SBC: Xsirius Superconductivity,            Topic: N/A

    N/A

    SBIR Phase II 1992 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government