You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. High Fidelity Multi-Mode Hyperspectral Multispectral Imager with Programmable Spectral Resolution

    SBC: KENT OPTRONICS INC            Topic: S304

    This SBIR Phase II proposal introduces a fast multi-mode hyperspectral-multispectral (MM-HS-MS) sensor with programmable spectral resolution. The sensor brings the following long-waiting benefits to the remote sensor community: (i) switchable between HS and MS operations, (ii) variable spectral resolution from 10nm to 560 nm; (iii) fast frame rate (54-1,750Hz), (iv) short full spectral range data ...

    SBIR Phase II 2009 National Aeronautics and Space Administration
  2. A Novel Low Cost, High Efficiency, Algal Biomass Harvest and Dewatering Technology for Biodiesel Production

    SBC: ACENT LABORATORIES LLC            Topic: N/A

    Governments and industry have recently placed significant emphasis on finding affordable renewable fuels to supplement and/or replace fossil fuel use. Biodiesel produced from microalgae has been identified as a highly attractive option for affordable renewable fuel. This project will develop a low cost, high-efficiency algal biomass harvest and dewatering process. In Phase I, a small scale syst ...

    SBIR Phase II 2009 Department of Energy
  3. IMPROVED MATERIALS FOR CERAMIC ARMOR FABRICATION

    SBC: ADVANCED REFRACTORY TECHNOLOGIES, INC.            Topic: N/A

    THE ABILITY TO FABRICATE CERAMIC ARMOR ECONOMICALLY IS DEPENDENT UPON SEVERAL FACTORS INCLUDING POWDER COST, FABRICATION TECHNIQUE, AND FINAL MACHINE COST. CANDIDATE CERAMIC SUCH AS TIB (2), AND B (4)C DO NOT SINTER TO FULL DENSITY. THEREFORE, NEAR-NET SHAPE FORMATION IS DIFFICULT AND EXPENSIVE, ESPECIALLY WHERE COMPLEX GEOMETRIES ARE INVOLVED. ART PROPOSES TO UTILIZE NEW POWDER SYNTHESIS TECHNOLO ...

    SBIR Phase II 1987 Department of DefenseNavy
  4. Environmental Pavement Monitor

    SBC: Advanced Design Consulting USA, Inc.            Topic: 07FH3

    With infrastructure costs escalating it is becoming essential to monitor the health of asphalt and concrete pavement so that timely maintenance can maximize their usefulness. This SBIR will develop a sensor that can be embedded within concrete or asphalt, which can measure moisture, temperature, stress and strain. It will provide critical data for evaluating pavement performance starting with th ...

    SBIR Phase II 2009 Department of Transportation
  5. Improved Superconducting Accelerator System for Next Generation Light Sources

    SBC: Advanced Energy Systems, Inc            Topic: N/A

    Modern synchrotron light sources have come to rely upon superconducting radio frequency (SRF) acceleration to achieve high luminosity. To date, the workhorse in this area has been the SRF system developed by Cornell in the mid-1990¿s for the CESR-B machine. However, as the quest for higher performance continues, this system is being stretched beyond its design limits. Required increases in inp ...

    SBIR Phase II 2009 Department of Energy
  6. High Power Fundamental Power Coupler for Next Generation Light Sources

    SBC: Advanced Energy Systems, Inc            Topic: N/A

    Future third generation light sources, such as the NSLS-II synchrotron light source proposed for Brookhaven National Laboratory (BNL), push the operating current and subsequent beam power to levels beyond the capabilities of single CESR-B/KEKB cavities. The proposed light source requires 500mA and 1000kW of radiated beam power that must be provided through the power couplers/windows. The develop ...

    SBIR Phase II 2009 Department of Energy
  7. Development of Alternative Reduced-Cost Helium Vessels for ILC Cavities

    SBC: Advanced Energy Systems, Inc            Topic: N/A

    The International Linear Collider (ILC) represents the next great undertaking for the worldwide high energy physics community. In addition to technical challenges posed by the project, the political realities demand a reduction in the cost of the components of this massive facility. The helium vessels that enclose each of the 16,000 superconducting cavities have been identified as a cost driver ...

    SBIR Phase II 2009 Department of Energy
  8. Lab-on-a-chip for multiplexed newborn screening of lysosomal storage disorders

    SBC: ADVANCED LIQUID LOGIC            Topic: N/A

    DESCRIPTION (provided by applicant): Newborn screening is currently performed by collecting dried bloodspots from infants and then sending them to a lab for analysis. Lysosomal storage diseases alone number greater than 40 and there is an increasing necessity to screen for a number of disease conditions for which therapies are becoming available. Tandem mass spectrometry is an excellent multiplex ...

    SBIR Phase II 2009 Department of Health and Human ServicesNational Institutes of Health
  9. High Temp Standoff Dielectric Antenna Windows Based on 3-D Woven Preforms

    SBC: 3TEX, Inc.            Topic: N08071

    Supersonic cruise missiles offer the ability to hit a time critical target with precision and lethality from long distances, yet the high speed generates temperatures on the exterior surfaces of the missile that can exceed the limitations of high temperature structural metals like titanium. Also, insulation to protect electronics equipment in the missile is required. One solution that demonstrates ...

    SBIR Phase II 2009 Department of DefenseNavy
  10. Development and Prototyping of a Digital Pulse Processor for Improved Coincidence Detection, Rejection, and Pulse Recovery, for High Count-Rate Silicon Drift Detectors

    SBC: 4pi Analysis, Inc.            Topic: N/A

    The recent emergence of the Silicon Drift detector (SDD), for use in energy dispersive x-ray spectrometry (EDS), has made possible x-ray event streams with count rates as high as 1-10 Mcps. A problem with existing digital signal processing, as applied to SDDs, is the significant presence of coincidence peaks above the x-ray background. These coincidence peaks occur with amplitudes comparable to lo ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government