You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Autonomous seafloor geotechnical property sensor

    SBC: Ocean Acoustical Services And Instrumentation Systems Inc            Topic: N06160

    Current geo-technical measurement systems are low resolution and generally require significant research vessel support. In this SBIR, the OASIS/WHOI team proposes to build a system that will remotely, autonomously and rapidly estimate and map shear strength parameters using state-of-the art Autonomous Undersea Vehicle (AUV) technology. The AUV-based Acoustic Sediment Classifier (ASC) is an inno ...

    SBIR Phase II 2007 Department of DefenseNavy
  2. Flame Resistant Material For Use in Protective Garment Applications

    SBC: NANOSYNTEX            Topic: A05188

    The main objective of this proposal is to build on the efforts of the Army SBIR Phase I project to finalize the design and development of a superior lightweight and comfortable flame resistant garment made of nonwoven composite fabric. The goal is to significantly elevate the fire and thermal protection properties of these next generation composite fabrics over conventional Nomex® at lower cost. ...

    SBIR Phase II 2007 Department of DefenseArmy
  3. Morphing High Temperature Shape Memory Alloy Actuators for Hypersonic Projectiles

    SBC: Mide Technology Corporation            Topic: N05T013

    Shape Memory Alloy (SMA) materials present unique benefits to the control and stabilization of hypersonic projectiles. Midé and the University of Colorado at Boulder is concluded in Phase I that SMA materials offer distinct advantages for the control of hypersonic projectile through the development and analysis of concepts that could achieve the desired flight control characteristics within the ...

    STTR Phase II 2007 Department of DefenseNavy
  4. Three-Dimensional Nonlinear Structural Analysis Methods for Gas Turbine Engine Metallic Components and Component Assemblies

    SBC: VEXTEC CORPORATION            Topic: AF06095

    The objective of this Phase II program is to implement, demonstrate and validate the computational techniques that were developed in Phase I that can be used for materials-damage based prognosis of gas turbine engine components and component assemblies. This approach will consist of a probabilistic multi-axial three-dimensional non-linear structural analysis method to enable the implementation of ...

    SBIR Phase II 2007 Department of DefenseAir Force
  5. VAMAV: Visual Collision Detection and Avoidance for a Micro Air Vehicle

    SBC: Scientific Systems Company Inc.            Topic: AF06149

    This proposal presents the VAMAV system (Visual Awareness/Avoidance for a Micro Air Vehicle) for monocular visual collision detection and avoidance. Real time collision detection will be implemented using a time-to-collision approach based on area moment estimates of expansion from globally optimal image segmentation. This approach does not require explicit optical flow computations, and avoids n ...

    SBIR Phase II 2007 Department of DefenseAir Force
  6. Ethylene Control in Fresh Fruits and Vegetables

    SBC: PRIMAIRA, LLC            Topic: A06180

    The accumulation of ethylene in the transport and storage of fresh produce is an important problem for the US Army and for commercial agriculture. Certain fruits and vegetables generate ethylene as a natural part of their ripening cycle. Other fruits and vegetables are highly sensitive to the presence of ethylene, but may or may not produce the ethylene themselves. Small amounts of ethylene can in ...

    SBIR Phase II 2007 Department of DefenseArmy
  7. Model-based Automated Target ID and Pose Estimation from SAR and ISAR Data

    SBC: Spectral Sciences, Inc.            Topic: A06206

    Automatic Target Recognition and intent determination from airborne Synthetic Aperture Radar (SAR) or Inverse Synthetic Aperture Radar (ISAR) imaging requires highly accurate pose determination. Prior knowledge in the form of radar signatures of 3D target models that accurately capture locations of a few (

    SBIR Phase II 2007 Department of DefenseArmy
  8. Non-Contact, Non-Destructive Sensor for Wet Layer Thickness of Marine Paints

    SBC: Physical Sciences Inc.            Topic: N05068

    PSI proposes to develop a real-time standoff paint thickness sensor for marine paints utilizing time-domain terahertz technology. The THz transceiver will operate in a mode analogous to a pulsed radar ranging system. Ultrashort pulses, ~300 femtosecond full width half maximum, of low-power, eye-safe THz radiation, comprising wavelengths between about 30 and 1000 microns, are focused onto a freshly ...

    SBIR Phase II 2007 Department of DefenseNavy
  9. Long Lasting Insecticide Impregnated Bednets(1001-079)

    SBC: Triton Systems, Inc.            Topic: A06156

    Building on the Phase I results, Triton Systems, Inc. proposes to further develop a long lasting insecticide-treated bednet (LLITN) with high insecticidal efficacy, long lasting residual property, UV-resistance, durability that is lightweight and easy to assemble. Our coating techniques that will be used in Phase II make it possible to increase the efficacy while reducing the dosage on the bednet. ...

    SBIR Phase II 2007 Department of DefenseArmy
  10. Combat Systems of the Future

    SBC: Mikel, Inc.            Topic: N05149

    The objective of this Phase II effort is to develop a prototype command and control system (Combat System of the Future) and associated concept of operations with the goals of improved automation, reduced manning and improved performance over current combat systems. This will be accomplished through the analysis of selected missions, first defining the specific decisions that must be made to accom ...

    SBIR Phase II 2007 Department of DefenseNavy
US Flag An Official Website of the United States Government