You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Plasma Limiter: RF Mitigation Device for Radar and Electronic Warfare Systems
SBC: ACCURATE AUTOMATION CORPORATION Topic: N03083The widespread use of communication devices and radar systems has made our society increasingly vulnerable to disruptive, high-power, short pulse electromagnetic interference (EMI) and high power microwaves (HPM). Significant advances in devices that produce these high-power, short pulses have been made in the US and abroad in the past few decades. As a result, the need for devices that can prot ...
SBIR Phase II 2005 Department of DefenseNavy -
Hydrogel Activated Bulkhead Shaft Seal
SBC: Mide Technology Corporation Topic: N04073Midé is proposing to complete the development of a hydrogel activated bulkhead shaft seal for the DDG-51 class ships. The purpose of a bulkhead seal is to prevent flooding between compartments along the main propulsion shafting. The current shipbuilder specifications require that the bulkhead shaft seal must be self-activating with a maximum leakage rate of 1 US pt/min for DDG ships. The probl ...
SBIR Phase II 2005 Department of DefenseNavy -
Si-N-B-C Aerogels for Thermal Protection System of Reentry Vehicles
SBC: ASPEN AEROGELS, INC. Topic: AF04031The Air Force has an interest in new designs and new materials for TPS of hypersonic reentry vehicles. Military hypersonic vehicles will reenter the atmosphere according to trajectories that are more aggressive than that of the Space Shuttle Orbiter and expected to be able to maneuver in the atmosphere at speeds around March 20 for more than 4100 seconds. This will result in the extremely high t ...
SBIR Phase II 2005 Department of DefenseAir Force -
Bayesian Troop-Target Detection, Tracking, and Prediction Using FOPEN-GMTI Radar
SBC: SCIENTIFIC SYSTEMS CO INC Topic: SB041024The "troop-target" problem of automatic detection, tracking, and prediction of the formations of dismounted ground troops concealed in foliage, using FOPEN-GMTI radars introduces challenges well beyond those encountered in more conventional group-target problems. AD HOC troop formations are considerably more amorphous and unpredictable and they must be deduced from the constituent individuals. Y ...
SBIR Phase II 2005 Department of DefenseDefense Advanced Research Projects Agency -
Field and Modeling Test Bed for Plume Detection through Sunlit Clouds
SBC: SPECTRAL SCIENCES INC Topic: MDA03004Early Launch Detection and Tracking (ELDT) is emerging as a key component of US ballistic missile defense strategy. The complications of sunlit cloud cover and long slant path viewing make the problem extremely challenging and have thus far hindered the validation of proposed approaches. Spectral Sciences, Inc. (SSI), in collaboration with SciTec, Inc., proposes to develop a validated simulation a ...
SBIR Phase II 2005 Department of DefenseMissile Defense Agency -
Precision Aerial Delivery of Sonobuoys (PADS)
SBC: KaZaK Composites Incorporated Topic: N04014PADS is an add-on device that couples to existing A/2 or smaller sonobuoys. When configured for launch, PADS conforms to A-size sonobuoy mass and geometry, so current ASW hardware and operational concepts can be employed for deployment. When launched from high altitude, PADS deploys wings and control surfaces to become a precision air delivery platform with a stand-off range approaching of 50 nm. ...
SBIR Phase II 2005 Department of DefenseNavy -
Maskless Lithography for Fabrication of Microelectronics with 100 nm Features
SBC: LUMARRAY, INC. Topic: SB032045The proposed Phase II program will produce in 1 year a low-cost, flexible, maskless-lithography tool, the Model 150A, capable of patterning arbitrary-geometries at minimum half-pitch features of 150 nm. This tool will meet the unique needs of DOD and ASIC practitioners for custom circuits, as well as the needs of a growing community in nanoscale science and engineering. The Model 150A, will emplo ...
SBIR Phase II 2005 Department of DefenseDefense Advanced Research Projects Agency -
Computation of Highly Excited Molecular Spectra
SBC: SPECTRAL SCIENCES INC Topic: MDA02016Radiation-transport (RT) codes constitute the core component of the target, plume, background, and atmospheric signature models utilized by MDA and virtually every other government agency and commercial company involved in developing optically-based weapons, surveillance, and remote sensing systems. Critical to the accuracy and range of application of RT codes are the accuracy and completeness of ...
SBIR Phase II 2005 Department of DefenseMissile Defense Agency -
Low Cost, Impact Damage Resistant Pultruded Composite Ship Structure
SBC: KaZaK Composites Incorporated Topic: N03101In Phase I KaZaK designed, fabricated and tested ¼ scale models of numerous material and configuration alternatives for the current 1” thick steel LCU hull bottom. Each alternative was made from composite materials, optimized for pultrusion processing to minimize cost, and tailored for production using KaZaK’s 10’ wide pultrusion equipment. Impact tests comparing performance of composite ca ...
SBIR Phase II 2005 Department of DefenseNavy -
Electronic Power Supplies Prognosis Using Material Modeling and Simulation
SBC: VEXTEC Corporation Topic: N03197Power supply systems are – compared to other electronic systems – highly susceptible to failure due to the high voltage and current conditions they routinely operate in. JSF operational reliability could be greatly enhanced by ensuring power supply performance in fielded systems. A power supply system is made up of various devices, all of which are interconnected with solder welds. During Phas ...
SBIR Phase II 2005 Department of DefenseNavy