You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Advanced Low-Drag Ram Air Turbine

    SBC: GHETZLER AERO-POWER CORP.            Topic: N/A

    The SBIR Phase II project will initially involve engineering, testing, and evaluation of a ground testable low drag-ram air turbine generator prototype used to determine the design requirements of a flight worthy unit. The design will be modified asrequired based on test results and analysis by computer modeling techniques prior to building two flight worthy prototypes.The prototype production pr ...

    SBIR Phase II 2003 Department of DefenseNavy
  2. Non-Invasive, Continuous, Transdermal Glucose Monitor w/Actuator Control

    SBC: ADVANCED SENSOR TECHNOLOGIES, INC.            Topic: N/A

    AST is developing a non-invasive methodology to continuously monitor blood glucose concentration. As opposed to employing near infrared spectroscopy, which suffers from limitations of sensitivity, stability, and repeatability, AST employs directmeasurement of glucose, via amperometric sensors, from minute amounts of interstitial fluid obtained transdermally. AST's miniature transdermal sampling ...

    SBIR Phase II 2003 Department of DefenseOffice of the Secretary of Defense
  3. Development of HTS Buffer Layers Using the ECONO Process

    SBC: APPLIED THIN FILMS, INC            Topic: N/A

    Under Phase I effort, Applied Thin Films, Inc. (ATFI) discovered a new process to deposit oxide buffer layers for HTS coated conductors that is economical, scalable, and has demonstrated excellent performance with YBCO films (current densities of 1MA/cm2). The process is called ECONO (Epitaxial Conversion to Oxide via Nitride Oxidation) which is now being considered as the primary contender for t ...

    SBIR Phase II 2003 Department of DefenseAir Force
  4. Microsensors for Gaseous Emissions Analysis

    SBC: Cavition, Inc.            Topic: N/A

    Caviton has developed a new generation of microsensors utilizing microdischarge based emission spectroscopy. The microdischarge plasma is well suited for emission spectroscopy of gases introduced into the discharge, at atmospheric pressure. An opticalfiber near the discharge couples the light from the discharge to a small spectrometer, and a computer for analysis. The properties of these device ...

    SBIR Phase II 2003 Department of DefenseAir Force
  5. SBIR Phase II: Innovative And Cost-Effective Process for Net-Shape Microfabrication of Ceramic Components

    SBC: Technology Holding, LLC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will develop a ceramic hydrogen fuel appliance (CHFA) using ceramic microreactor modules (CMMs) using a low-cost, net-shape manufacturing process, and a new material, that was developed in the Phase I project. The new material developed was demonstrated to have excellent capability for cost-effective microfabri ...

    SBIR Phase II 2003 National Science Foundation
  6. Enhanced Toughness SiC with High Hardness for Advanced Armor

    SBC: Technology Holding, LLC            Topic: N/A

    Phase I research demonstrated that toughness of 8 MPa.m1/2 is attainable in advanced SiC using the SEPB technique, as compared with 2.5 MPa.m1/2 for conventional SiC. The Phase I work is currently on schedule in order to meet the objective of 5.5MPa.m1/2 toughness at a hardness of at least 24 GPa. SiC developed in Phase II work will have a hardness exceeding 28 GPa at a toughness greater than 7 ...

    SBIR Phase II 2003 Department of DefenseArmy
  7. MICRO-FABRICATED CERAMIC COMPONENTS FOR OPTICAL FIBER CONNECTORS IN HARSH OPERATIONAL ENVIRONMENTS

    SBC: Technology Holding, LLC            Topic: N/A

    The objective of this Small Business Innovation Research Phase IIproject is to develop an innovative, cost-effective ceramicmaterial (CERCANAM) and technique for fabricating fiber-opticconnectors. Connectors fabricated using current connectortechnology have difficulties operating in harsh environmentsexperienced by military and commercial aircraft and above 300 Cdue to materials limitations in the ...

    SBIR Phase II 2003 Department of DefenseNavy
  8. Quantum Image Processing Toolkit

    SBC: CYBERNET SYSTEMS CORPORATION            Topic: N/A

    Moore's law states that computing performance doubles every 18 months. While this has held true for 40 years, it is widely believed that this will soon come to an end. Increases in performance coincide with decreases in scale on the computer platform. Dueto the small scale of computer components, both interference effects are starting to play a role in the development of new components. This impli ...

    SBIR Phase II 2003 Department of DefenseAir Force
  9. Design of a Graphical Interface for Managing Multiple Unmanned Aerial Vehicles

    SBC: CYBERNET SYSTEMS CORPORATION            Topic: N/A

    This proposal describes the design and creation of an interface for controlling multiple UAVs in a real-time situation. Named the Uninhabited Air Vehicle Management Interface (UAVMI), it is centered on a 3-dimensional graphical representation of theoperational geographic area. The operator is able to move a 3D cursor around within this geographic volume, selecting groups, paths, and targets in 3D ...

    SBIR Phase II 2003 Department of DefenseAir Force
  10. A Tactical Terrain Viewer for Rendering 3D Topographic Data on Field Based Displays

    SBC: CYBERNET SYSTEMS CORPORATION            Topic: N/A

    The goal of the Phase II project is to further develop the Phase I graphical software so that field-based soldiers can assimilate topographic information using handheld computers rather than paper topographic maps. This main task is to present topographicinformation in a way that conveys a three-dimensional image on the computer screen. Because Cybernet has worked in the past to develop computer g ...

    SBIR Phase II 2003 Department of DefenseArmy
US Flag An Official Website of the United States Government