You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Advanced Low-Drag Ram Air Turbine

    SBC: GHETZLER AERO-POWER CORP.            Topic: N/A

    The SBIR Phase II project will initially involve engineering, testing, and evaluation of a ground testable low drag-ram air turbine generator prototype used to determine the design requirements of a flight worthy unit. The design will be modified asrequired based on test results and analysis by computer modeling techniques prior to building two flight worthy prototypes.The prototype production pr ...

    SBIR Phase II 2003 Department of DefenseNavy
  2. Development of HTS Buffer Layers Using the ECONO Process

    SBC: APPLIED THIN FILMS, INC            Topic: N/A

    Under Phase I effort, Applied Thin Films, Inc. (ATFI) discovered a new process to deposit oxide buffer layers for HTS coated conductors that is economical, scalable, and has demonstrated excellent performance with YBCO films (current densities of 1MA/cm2). The process is called ECONO (Epitaxial Conversion to Oxide via Nitride Oxidation) which is now being considered as the primary contender for t ...

    SBIR Phase II 2003 Department of DefenseAir Force
  3. Microsensors for Gaseous Emissions Analysis

    SBC: Cavition, Inc.            Topic: N/A

    Caviton has developed a new generation of microsensors utilizing microdischarge based emission spectroscopy. The microdischarge plasma is well suited for emission spectroscopy of gases introduced into the discharge, at atmospheric pressure. An opticalfiber near the discharge couples the light from the discharge to a small spectrometer, and a computer for analysis. The properties of these device ...

    SBIR Phase II 2003 Department of DefenseAir Force
  4. SBIR Phase II: Innovative And Cost-Effective Process for Net-Shape Microfabrication of Ceramic Components

    SBC: Technology Holding, LLC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will develop a ceramic hydrogen fuel appliance (CHFA) using ceramic microreactor modules (CMMs) using a low-cost, net-shape manufacturing process, and a new material, that was developed in the Phase I project. The new material developed was demonstrated to have excellent capability for cost-effective microfabri ...

    SBIR Phase II 2003 National Science Foundation
  5. Enhanced Toughness SiC with High Hardness for Advanced Armor

    SBC: Technology Holding, LLC            Topic: N/A

    Phase I research demonstrated that toughness of 8 MPa.m1/2 is attainable in advanced SiC using the SEPB technique, as compared with 2.5 MPa.m1/2 for conventional SiC. The Phase I work is currently on schedule in order to meet the objective of 5.5MPa.m1/2 toughness at a hardness of at least 24 GPa. SiC developed in Phase II work will have a hardness exceeding 28 GPa at a toughness greater than 7 ...

    SBIR Phase II 2003 Department of DefenseArmy
  6. MICRO-FABRICATED CERAMIC COMPONENTS FOR OPTICAL FIBER CONNECTORS IN HARSH OPERATIONAL ENVIRONMENTS

    SBC: Technology Holding, LLC            Topic: N/A

    The objective of this Small Business Innovation Research Phase IIproject is to develop an innovative, cost-effective ceramicmaterial (CERCANAM) and technique for fabricating fiber-opticconnectors. Connectors fabricated using current connectortechnology have difficulties operating in harsh environmentsexperienced by military and commercial aircraft and above 300 Cdue to materials limitations in the ...

    SBIR Phase II 2003 Department of DefenseNavy
  7. Low Profile Confomal Designs for the VHF/UHF Laminated Antenna

    SBC: Sciperio, Inc.            Topic: N/A

    Conformal antennas for VHF/UHF have multiple uses, but the Phase I effort by Sciperio was focused on the design of a SLICE band omni-directional UHF antenna for integration within a soldiers helmet. The Phase I results for this conformal concept wereproof of the feasibility of designing an antenna capable of being integrated within or onto the surface of a Kevlar helmet. The antenna consists of ...

    SBIR Phase II 2003 Department of DefenseArmy
  8. Closed-Cycle ElectriCOIL Technology

    SBC: CU AEROSPACE L.L.C.            Topic: N/A

    The primary objective of CU AerospaceOs Phase II engineering work will be to develop all-gas-phase closed-cycle electrically assisted chemical laser COIL (ElectriCOIL) technology. CU Aerospace (CUA) and the University of Illinois at Urbana-Champaign(UIUC) believe that this challenge can be surmounted with changes to gain generator research including 1) radically new, electrically driven O2(1D) ge ...

    SBIR Phase II 2003 Department of DefenseMissile Defense Agency
  9. SBIR Phase II: Carbon Fiber/Boron Nitride Matrix Composites: A Unique Low Wear Friction Material

    SBC: EKOS Materials Corporation            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project proposes to develop a testing application for intermediate and full scale boron nitride (BN) composites for a wide variety of wear applications with a focus on aircraft brakes. Viability of this material was demonstrated in Phase I where 3-dimensional needled carbon fiber/C-BN hybrid matrix composites displayed an order of magnitud ...

    SBIR Phase II 2003 National Science Foundation
  10. Superlattice Materials for Very-Long Wavelength Infrared Detectors (VLWIR)

    SBC: EPIR TECHNOLOGIES INC            Topic: N/A

    The fabrication of large format, highly sensitive focal plane arrays (FPAs) sensing at very long wavelengths in the infrared region (VLWIR), i.e. beyond 15um, is highly desirable for the Air Force's space-based applications. Currently, only limited typesof arrays such as 256 X 256 Si:As are available in this spectral region. However, these extrinsic detectors suffer from several fundamental limita ...

    SBIR Phase II 2003 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government