Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. SYSTEM-OPTIMIZPD, ULTRA LOW-COST, HIGH-STRENGTH FUEL TANKAGE FOR LONG-RANGE MISSILES

    SBC: AEROTECH ENGINEERING & RESEARCH CORP.            Topic: N/A

    AN ULTRA LOW-COST FUEL TANKAGE FOR EXPENDABLE TURBOJET PROPULSION SYSTEMS TO BE USED IN THE LONGFOG MISSILE IS PROPOSED. DESIGN CRITERIA AND TECHICAL OBJECTIVES BASED ON MISSION REQUIREMENTS AND COST-EFFECTIVENESS ARE PRESENTED. TWO CANDIDATE SYSTEMS ARE PROPOSED: ONE FEATURING COMPRESSOR DISCHARGE BLEED AIR FOR FUEL TANK PRESSURIZATION AND THE OTHER FEATURING A HIGH-PRESSURE BOTTLE OF INERT GAS F ...

    SBIR Phase II 1994 Department of DefenseDefense Advanced Research Projects Agency
  2. Enhanced Toughness SiC with High Hardness for Advanced Armor

    SBC: Technology Holding, LLC            Topic: N/A

    Phase I research demonstrated that toughness of 8 MPa.m1/2 is attainable in advanced SiC using the SEPB technique, as compared with 2.5 MPa.m1/2 for conventional SiC. The Phase I work is currently on schedule in order to meet the objective of 5.5MPa.m1/2 toughness at a hardness of at least 24 GPa. SiC developed in Phase II work will have a hardness exceeding 28 GPa at a toughness greater than 7 ...

    SBIR Phase II 2003 Department of DefenseArmy
  3. MICRO-FABRICATED CERAMIC COMPONENTS FOR OPTICAL FIBER CONNECTORS IN HARSH OPERATIONAL ENVIRONMENTS

    SBC: Technology Holding, LLC            Topic: N/A

    The objective of this Small Business Innovation Research Phase IIproject is to develop an innovative, cost-effective ceramicmaterial (CERCANAM) and technique for fabricating fiber-opticconnectors. Connectors fabricated using current connectortechnology have difficulties operating in harsh environmentsexperienced by military and commercial aircraft and above 300 Cdue to materials limitations in the ...

    SBIR Phase II 2003 Department of DefenseNavy
  4. Low Profile Confomal Designs for the VHF/UHF Laminated Antenna

    SBC: Sciperio, Inc.            Topic: N/A

    Conformal antennas for VHF/UHF have multiple uses, but the Phase I effort by Sciperio was focused on the design of a SLICE band omni-directional UHF antenna for integration within a soldiers helmet. The Phase I results for this conformal concept wereproof of the feasibility of designing an antenna capable of being integrated within or onto the surface of a Kevlar helmet. The antenna consists of ...

    SBIR Phase II 2003 Department of DefenseArmy
  5. Developing Human-Compatible Needleless Delivery Systems for Administering Bioscavengers

    SBC: FELTON INTERNATIONAL, INC.            Topic: N/A

    Phase II will focus on the design and development of a prototype needle-free injection system for administering BChE enzyme into humans to provide protection against chemical warfare agents. The Phase I proof-of-concept demonstrated the accelerateddelivery of BChE into the circulatory system using needle-free injection. The second phase of this project will consist of the following three tasks: ...

    SBIR Phase II 2003 Department of DefenseArmy
  6. Novel, Low Cost t'- and m'-Zirconia Ceramics for a Storage Heater

    SBC: Materials and Systems Research, Inc.            Topic: N/A

    The objective of this work is to determine the best possible polycrystalline zirconia from the standpoint of properties and cost for applications in storage heaters. Our prior work has shown that highly stable tetragonal t'-zirconia with domain structure containing (

    SBIR Phase II 1994 Department of DefenseAir Force
  7. Hubrid Hull Forms and Drag Reduction for Conceptual High Speed Submersibles

    SBC: MECHMATH LLC            Topic: N/A

    Department of Defense is interested in development of small fighter-like vehicle for combined underwater and surface motions at high speeds. The vehicle requires carry weapons under water. The weapons may generate high additional drag, and drag reductionis the key aspect in design of its hybrid hull. Hydrofoil removes missiles from water at highest speeds, but the problem is to reduce the drag bef ...

    SBIR Phase II 2003 Department of DefenseDefense Advanced Research Projects Agency
  8. Autonomous Underwater Sensing of Weapons of Mass Destruction (WMD)

    SBC: Nomadics, Inc.            Topic: N/A

    Nomadics, teamed with the University of Rhode Island, proposes to develop sensors for the detection of weapons of mass destruction underwater for protection of the nation's coastlines and the protection of deployed forces. The Phase I effort successfullydemonstrated that payloads using these types of sensors could be deployed on REMUS underwater autonomous vehicles and be capable of detecting exp ...

    STTR Phase II 2003 Department of DefenseNavy
  9. Ecologically Benign Corrosion Protection by Stratified Coatings

    SBC: Nomadics, Inc.            Topic: N/A

    Military aircraft are largely constructed from special aluminum alloys, which typically have secondary precipitate phases that substantially improve mechanical strength. However, these regions also promote corrosion in such common environmental conditionsas acid rain, saltwater, and thermal cycling. The problem is significant enough that the U.S. Air Force expends approximately $1 billion per year ...

    STTR Phase II 2003 Department of DefenseAir Force
  10. Detection of Infectious Bacteria in Water

    SBC: Nomadics, Inc.            Topic: N/A

    In this Phase II proposal, Nomadics in a collaborative effort with the Keck Graduate Institute proposes to develop assays and devices based on amplifying fluorescent polymer (AFP) technology for the rapid identification of biological warfare agents inwater. The rapid, sensitive detection and identification of biological agents in water will have a dramatic impact on the adoption of intervention s ...

    STTR Phase II 2003 Department of DefenseArmy
US Flag An Official Website of the United States Government