Award Data

This Small Business Technology Transfer (STTR) Phase II project is to design and develop a fully automated system for crosscutting planks of lumber into parts with specific length and surface characteristic requirements. This system consists of a scanning device with four heads to scan the four surfaces of each incoming plank, a mathematical programming model and a software system to determine an ...

This Small Business Innovation Research (SBIR) Phase II project will develop a ceramic hydrogen fuel appliance (CHFA) using ceramic microreactor modules (CMMs) using a low-cost, net-shape manufacturing process, and a new material, that was developed in the Phase I project. The new material developed was demonstrated to have excellent capability for cost-effective microfabri ...

Phase I research demonstrated that toughness of 8 MPa.m1/2 is attainable in advanced SiC using the SEPB technique, as compared with 2.5 MPa.m1/2 for conventional SiC. The Phase I work is currently on schedule in order to meet the objective of 5.5MPa.m1/2 toughness at a hardness of at least 24 GPa. SiC developed in Phase II work will have a hardness exceeding 28 GPa at a toughness greater than 7 ...

Conformal antennas for VHF/UHF have multiple uses, but the Phase I effort by Sciperio was focused on the design of a SLICE band omni-directional UHF antenna for integration within a soldiers helmet. The Phase I results for this conformal concept wereproof of the feasibility of designing an antenna capable of being integrated within or onto the surface of a Kevlar helmet. The antenna consists of ...

Phase II will focus on the design and development of a prototype needle-free injection system for administering BChE enzyme into humans to provide protection against chemical warfare agents. The Phase I proof-of-concept demonstrated the accelerateddelivery of BChE into the circulatory system using needle-free injection. The second phase of this project will consist of the following three tasks: ...

NA-BETA-ALUMINA IS THE SOLID ELECTROLYTE MEMBRANE USED IN SODIUM-SULFUR BATTERIES WITH APPLICATIONS IN LOAD LEVELING, ELECTRIC AUTOMOBILES, AND SATELLITE COMMUNICATIONS. THE STATE-OF-THE-ART ELECTROLYTES ARE FABRICATED BY GREEN-FORMING FOLLOWED BY SINTERING AT ~1540 DEGREES CENTIGRADE. ENCAPSULATION IN PLATINUM CONTAINERS OR MAGNESIA CRUCIBLES IS NECESSARY TO PREVENT LOSS OF SODA. TYPICAL THICKNES ...

MicroPhase Coatings, Inc. (MPCI) proposes to develop polymer liners for lightweight gel propulsion storage tanks under SBIR Phase II Topic A02-144. Polymer liners provide lightweight, long term, safe storage of Inhibited Red Fuming Nitric Acid (IRFNA) geland Mono Methyl Hydrazine (MMH) gel used in missile and space propulsion systems. The Phase II effort produces prototype gel propulsion tanks tha ...

A mobile platform is proposed for aquatic in-situ toxicant detection featuring living biosensors. This platform or BioSensor Suite comprises a sentinel species biosensor, water quality monitoring sensors and a water sampler. The BioSensor Suite will bedeployable as an integrated sensor package on the Ranger TA (Toxic Alarm), a 10 lb micro-UUV. The proposed effort will include system design, fab ...

This Small Business Innovation Research (SBIR) Phase II project will develop a new generation of fluorescence amplifying reagents based on poly (phenylene ethynylene (PPE)) nanoparticles. Because of the role of the amplifying polymer in the enhanced sensitivity of these compounds, these compounds are called Amplimer reagents. The project will develop and launch two types of Amplimer reagents: mic ...

In this Phase II proposal, Nomadics in a collaborative effort with the Keck Graduate Institute proposes to develop assays and devices based on amplifying fluorescent polymer (AFP) technology for the rapid identification of biological warfare agents inwater. The rapid, sensitive detection and identification of biological agents in water will have a dramatic impact on the adoption of intervention s ...