You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
SBIR Phase II: Innovative And Cost-Effective Process for Net-Shape Microfabrication of Ceramic Components
SBC: Technology Holding, LLC Topic: N/AThis Small Business Innovation Research (SBIR) Phase II project will develop a ceramic hydrogen fuel appliance (CHFA) using ceramic microreactor modules (CMMs) using a low-cost, net-shape manufacturing process, and a new material, that was developed in the Phase I project. The new material developed was demonstrated to have excellent capability for cost-effective microfabri ...
SBIR Phase II 2003 National Science Foundation -
SBIR Phase II: Low Dielectric Fiber for High Frequency Circuit Board Applications
SBC: INNEGRITY LLC Topic: EOThis Small Business Innovation Research (SBIR) Phase II project aims to develop the production and application of low dielectric fibers for use in high frequency circuit board applications. As the frequency of digital communications approaches the frequency at which microwave ovens work, the importance of the dielectric properties of the substrate material on which digital circuits are formed is b ...
SBIR Phase II 2008 National Science Foundation -
THIN NA-BETA-ALUMINA ELECTROLYTES BY ELECTROCHEMICAL VAPOR DEPOSITION (EVD) FOR SODIUM-SULFUR BATTERIES
SBC: Materials and Systems Research, Inc. Topic: N/ANA-BETA-ALUMINA IS THE SOLID ELECTROLYTE MEMBRANE USED IN SODIUM-SULFUR BATTERIES WITH APPLICATIONS IN LOAD LEVELING, ELECTRIC AUTOMOBILES, AND SATELLITE COMMUNICATIONS. THE STATE-OF-THE-ART ELECTROLYTES ARE FABRICATED BY GREEN-FORMING FOLLOWED BY SINTERING AT ~1540 DEGREES CENTIGRADE. ENCAPSULATION IN PLATINUM CONTAINERS OR MAGNESIA CRUCIBLES IS NECESSARY TO PREVENT LOSS OF SODA. TYPICAL THICKNES ...
SBIR Phase II 1994 National Science Foundation -
SBIR Phase II: Fluorescent Polymeric Nanoparticles
SBC: Nomadics, Inc. Topic: N/AThis Small Business Innovation Research (SBIR) Phase II project will develop a new generation of fluorescence amplifying reagents based on poly (phenylene ethynylene (PPE)) nanoparticles. Because of the role of the amplifying polymer in the enhanced sensitivity of these compounds, these compounds are called Amplimer reagents. The project will develop and launch two types of Amplimer reagents: mic ...
SBIR Phase II 2003 National Science Foundation -
SBIR Phase II: New Synthetic Approaches to Higher Performance, Lower Cost CO2/CH4 Gas Separation Membranes
SBC: TETRAMER TECHNOLOGIES LLC Topic: CTThis Small Business Innovation Research Phase II project aims to develop a new gas separation polymer membrane technology created in Phase I to significantly improve the ability to separate carbon dioxide from methane. Successful utilization of this new technology to separation of these commercially important gases will provide better performance at lower cost than current methods for separating ...
SBIR Phase II 2008 National Science Foundation -
SBIR Phase II: An Innovative Method for Removing Resist from Wafers
SBC: Uncopiers, Inc. Topic: CTThe Small Business Innovation Research (SBIR) Phase II project seeks to develop an innovative, environment friendly method for removing resist from semiconductor wafers. After every lithography step, and the following processing step, e.g., etching or ion implantation, the process-hardened resist must be stripped away and the wafer cleaned. Existing photoresist removal methods (plasma ashing and ...
SBIR Phase II 2008 National Science Foundation
