You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. No Power Detection and Identification of Nerve Agents

    SBC: LYNNTECH INC.            Topic: CBD10101

    Identification of organophosphates (OPs) based nerve agents, is vital to the protection of U.S. armed forces personnel. Existing detection methods use bulky and expensive laboratory equipment, negating their battlefield use. Colorimetric indicators such as the currently deployed M8 and M9 detection papers are the fastest, cheapest, and easiest type of detector to use; however, these cannot detect ...

    SBIR Phase II 2011 Department of DefenseOffice for Chemical and Biological Defense
  2. Electrochemical-Driven Fluid Pump for Spacecraft Thermal Control

    SBC: LYNNTECH INC.            Topic: S706

    With the increasing power demands and longer life spans of space vehicles, their thermal management becomes ever more critical. Accompanying this is an unprecedented need for reduction in spacecraft size and weight. However, reduced weight leads to higher power densities, and waste-heat dissipation densities have grown by an order of magnitude with the use of smaller, more powerful electronics. ...

    SBIR Phase II 2008 National Aeronautics and Space Administration
  3. GaN Bulk Growth and Epitaxy from Ca-Ga-N Solutions

    SBC: The IIIAN Company, LLC            Topic: O107

    The innovations proposed here are Ka-band (38 GHz) group III-nitride power FETs and the dislocation density reducing epitaxial growth methods (LPE) needed for their optimal performance and reliability.Ka-band power transistors with>60% Power Added Efficiency (PAE) are not commercially available. The primary limitations to their manufacture are lack of mature process technology at major GaN foundri ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  4. Advanced Oxygen Evolution Catalysts for PEM Electrolyzers

    SBC: LYNNTECH INC.            Topic: X703

    Future NASA missions require high efficiency, lightweight, long life, and maintenance-free water electrolyzer technologies to generate oxygen and/or hydrogen for energy storage, propulsion, life-support systems, cabin-oxygen replenishment, and zero-g science activities. International Space Station, future Lunar and Martian Outposts, and future exploration vehicles require high efficiency electrol ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  5. Drastic Improvements in Bonding of Fiber Reinforced Multifunctional Composites

    SBC: Integrated Micro Sensors, Inc.            Topic: X503

    Achievement of a dramatic increase in the bond strength in the adhesive and composite/adhesive interfaces of existing fiber reinforced composite material joints and structures suitable for various NASA applications is the main goal of this project. The proposed technology developed at Integrated Micro Sensors Inc is based on laser-assisted fabrication of Micro Column Arrays (MCA) on the surface o ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  6. Acoustic Reduction of Flow Separation

    SBC: LYNNTECH INC.            Topic: T201

    Airfoils produce more lift and less drag when the boundary layer is attached to the airfoil. With most aircraft there are combinations of airspeed and angle of attack where the boundary layer at least partially detaches from the airfoil. Reducing boundary layer detachment increases lift and reduce drag reducing fuel consumption and improving control for the pilot. Two methods known to improve b ...

    STTR Phase II 2011 National Aeronautics and Space Administration
  7. Low Cost, Light Weight Materials for Mirrors

    SBC: ADVANCED POWDER SOLUTIONS INC            Topic: N/A

    During the phase I program Northwestern and APS, Inc., have manufactured several different materials systems that are lighter than Beryllium and stiffer than Aluminum. These high specific strength materials are also easily fabricated into larger shapes or even net shape processed. The mechanical (tensile and modulus) and thermal physical (CTE, thermal conductivity) property data for several syste ...

    STTR Phase II 2008 National Aeronautics and Space Administration
  8. System-Level Autonomy Trust Enabler (SLATE)

    SBC: ADVENTIUM ENTERPRISES, LLC            Topic: N/A

    This SBIR addresses the problem that current V&V technology provides component guarantees, but does not do well on system properties. Human acceptance of autonomy hinges on trusting system-level behavior. The goal is to develop technology to verify system properties for high-level autonomous control of complex systems operating in rich and unpredictable environments. The System-Level Autonomy Tru ...

    SBIR Phase II 2008 National Aeronautics and Space Administration
  9. Distributed Leak Detection System Using Structure-Borne Noise

    SBC: INVOCON, INC.            Topic: T502

    Manned spacecraft are vulnerable to air leaks caused by micrometeoroid and space debris impact. The ability to detect and quickly locate and mitigate a pressure vessel breach is critical to the safety of any long duration spacecraft, such as the International Space Station or a proposed lunar base or mission to Mars. Current NASA protocol for finding a spacecraft leak uses a handheld ultrasonic ...

    STTR Phase II 2008 National Aeronautics and Space Administration
  10. Miniature Laser Magnetometer (MLM)

    SBC: POLATOMIC, INC.            Topic: S106

    This 2009 NASA SBIR Phase 2 proposal for an innovative Miniature Laser Magnetometer (MLM) is a response to subtopic S1.06 Particles and Field Sensors and Instrument Enabling Technologies. The MLM instrument will incorporate a number of technical innovations to achieve high-sensitivity and high-stability performance while significantly reducing the size of the laser-pumped helium magnetometer for u ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government