You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Robust High Temperature Environmental Barrier Coating System for Ceramic Matrix Composite Gas Turbine Components using Affordable Processing Approach
SBC: Directed Vapor Technologies International, Inc. Topic: A307Research is proposed to demonstrate the use of advanced manufacturing techniques to enable the affordable application of multi-functional thermal/environmental barrier coatings (T/EBCs) having enhanced resistance to high temperature combustion environments. T/EBCs are envisioned to protect the surface of Si-based ceramics against moisture-assisted, oxidation-induced ceramic recession. Current T/EB ...
SBIR Phase II 2015 National Aeronautics and Space Administration -
Airborne Multi-Gas Sensor
SBC: MESA PHOTONICS LLC Topic: S107Mesa Photonics has developed laser-based gas sensor technology compatible with UAV deployment. Our Airborne MUlti-Gas Sensor (AMUGS) technology is based upon two-tone frequency-modulated spectroscopy (TT-FMS). TT-FMS retains the advantages of near-infrared diode lasers while pushing detection sensitivity more than two orders of magnitude closer to the theoretical limit. Phase I results demonstrate ...
SBIR Phase II 2015 National Aeronautics and Space Administration -
Methane LIDAR Laser Technology
SBC: FIBERTEK, INC. Topic: S101Fibertek proposes to develop laser technology intended to meet NASA's need for innovative lidar technologies for atmospheric measurements of methane. NASA and the 2007 NRC Earth Science Decadal Study have identified methane lidar as a key technology needed to address global change research. Under this SBIR opportunity, we propose to develop an injection-seeded Erbium-doped YAG (Er:YAG) laser trans ...
SBIR Phase II 2015 National Aeronautics and Space Administration -
Physics-Based Modeling Tools for Life Prediction and Durability Assessment of Advanced Materials
SBC: ELDER RESEARCH, INC. Topic: T1202The technical objectives of this program are: (1) to develop a set of physics-based modeling tools to predict the initiation of hot corrosion and to address pit and fatigue crack formation in Ni-based alloys subjected to corrosive environments, (2) to implement this set of physics-based modeling tools into the DARWIN probabilistic life-prediction code, and (3) to demonstrate corrosion fatigue crac ...
STTR Phase II 2015 National Aeronautics and Space Administration -
Development of a "Digital Bridge" Thermal Anemometer for Turbulence Measurements
SBC: VIGYAN INC Topic: A401Thermal anemometry (a.k.a. hot-wire anemometry) has been a key experimental technique in fluid mechanics for many decades. Due to the small physical size and high frequency response of the sensors (resulting in excellent spatial and temporal resolution), the technique has been widely used for studies of turbulent flows. Even with the advent of nonintrusive techniques such as Laser Doppler Velocime ...
SBIR Phase II 2015 National Aeronautics and Space Administration -
1U CubeSat Lasercom Terminal for Deep Space Communication
SBC: FIBERTEK, INC. Topic: Z2001In this NASA SBIR-select Phase 2 program Fibertek will develop, test and validate a high-fidelity 1U CubeSat Lasercom Optical Terminal prototype, optimized for deep-space optical communication, and targeting the following characteristics (i) Low Size/Weight/Power (SWaP) 1U Lasercom Terminal for deep-space mission (total power budget P
SBIR Phase II 2015 National Aeronautics and Space Administration -
Laser Transmitter for Space-Based Atmospheric and Oceanographic LIDAR
SBC: FIBERTEK, INC. Topic: S101echnical Abstract: IThis Phase II SBIR program will build on successful Phase I work to provide Technology Readiness Level 4 (TRL-4) laboratory brassboard demonstration of laser sources and non-linear wavelength converters with significant improvements in efficiency and reduction in size, weight, and power consumption compared to systems currently available for space-based instruments planned for ...
SBIR Phase II 2015 National Aeronautics and Space Administration -
Ku/Ka-Band Electrically-Scanned Line Array for Tri-Band Cloud and Precipitation Radar Applications
SBC: Nuvotronics, LLC Topic: S2001This proposed program addresses the need for a spaceborne phased array radar system that operates simultaneously at multiple frequency bands for future NASA remote sensing missions dedicated to answering emerging fundamental questions associated with aerosols, clouds, air quality and ecosystems. We will deliver active, electronically scanned array tiles at Ku- and Ka-band utilizing the Nuvotronics ...
SBIR Phase II 2015 National Aeronautics and Space Administration -
Multifunctional Shielding and Self-Healing HybridSil Smart Composites for Space
SBC: NANOSONIC INC. Topic: T1002NanoSonic has developed revolutionary multifunctional, super lightweight, self-healing and radiation shielding carbon fiber reinforced polymer (CFRP) composites as a viable lightweight material for space applications such as primary or secondary structures on NASA vehicles, habitat modules, and pressure vessel structures. While current composites are lightweight, they do not offer reliable method ...
STTR Phase II 2015 National Aeronautics and Space Administration -
High Temperature Fiberoptic Thermal Imaging System
SBC: THOUGHTVENTIONS UNLIMITED LLC Topic: A401A prototype high temperature, single optical fiber thermal imaging system will be developed, tested, and delivered to GRC. The components of the instrument will be specified in detail, designed, fabricated, and purchased where appropriate. The illumination and imaging system will be assembled and system tests will be performed. Given a set of calibration images produced by the diagnostic, the i ...
SBIR Phase II 2015 National Aeronautics and Space Administration