List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. ATMOSPHERIC DISPERSION OF ORDNANCE PRODUCTS

    SBC: El Dorado Engineering, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1985 Department of DefenseNavy
  2. THE PRIMARY FOCUS OF THIS SBIR PROJECT IS THE RESERCH FOR THE DEVELOPMENT OF A TECHNOLOGY FOR DESIGNING AND FABRIC ATING NON-AVAILABLE MICROCIRCUITS USING STATE-OF-THE-ART CMOS PROCESSES.

    SBC: BONNEVILLE SCIENTIFIC, INC.            Topic: N/A

    THE PRIMARY FOCUS OF THIS SBIR PROJECT IS THE RESERCH FOR THE DEVELOPMENT OF A TECHNOLOGY FOR DESIGNING AND FABRIC ATING NON-AVAILABLE MICROCIRCUITS USING STATE-OF-THE-ART CMOS PROCESSES. THE RESEARCH IS AIMED AT KEEPING THE NON- RECURRING ENGINEERING (NRE) COSTS ASSOCIATED WITH BOTH DESIGN AND FABRICATION LOW. DESIGN COSTS FOR THE PARTS WILL BE KEPT LOW BY USING A MODIFIED VERSION OF A METHODOLOG ...

    SBIR Phase I 1986 Department of DefenseNavy
  3. SODIUM HEAT ENGINE DEVELOPMENT

    SBC: Technology Holding, LLC            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseMissile Defense Agency
  4. ATMOSPHERIC DISPERSION OF ORDNANCE PRODUCTS

    SBC: El Dorado Engineering, Inc.            Topic: N/A

    THE OBJECTIVE OF THE PROJECT IS TO DEVELOP A MATHEMATICAL MODEL FOR PREDICTING DISPERSION FROM OPEN AIR DETONATION OR BURNING OF THE NAVY'S PEP (PROPELLANT EXPLOSIVE, PYROTECHNIC) MATERIALS. THE FIRST STEP OF THE PROJECT WILL BE TO DEFINE THE CONTROLLING PARAMETERS, I.E., PRODUCTS OF COMBUSTION FORMED, PARTICLE SIZE ANALYSES AND PLUM CHARACTERISTICS. GENERALIZED PREDICTION MODELS DEVELOPED FOR CHE ...

    SBIR Phase II 1986 Department of DefenseNavy
  5. TO ACHIEVE SATISFACTORY TACAN PERFORMANCE ON ALL RADIALS A SHIP TACAN ANTENNA REQUIRES AN UNOBSTRUCTED SITE, ATOP THE MAIN (HIGHEST) MAST, IN THE CLEAR, FREE OF RF REFLECTIONS.

    SBC: Jtp Radiation Inc            Topic: N/A

    TO ACHIEVE SATISFACTORY TACAN PERFORMANCE ON ALL RADIALS A SHIP TACAN ANTENNA REQUIRES AN UNOBSTRUCTED SITE, ATOP THE MAIN (HIGHEST) MAST, IN THE CLEAR, FREE OF RF REFLECTIONS. DUE TO THE CONTINUING IMPLEMENTATION OF NEW SYSTEMS E.G. GPS, ECM, JTIDS, OTHER, THE AREA IN THE VICINITY OF THE TOP OF THE SHIPS MAIN MAST IS CONTINUING TO BE IN GREATER AND GREATER DEMAND. THIS IS ESPECIALLY TRUE IN THE C ...

    SBIR Phase I 1986 Department of DefenseNavy
  6. SODIUM HEAT ENGINE DEVELOPMENT

    SBC: Technology Holding, LLC            Topic: N/A

    THE SODIUM HEAT ENGINE (SHE) IS AN EFFICIENT DEVICE FOR THE DIRECT CONVERSION OF THERMAL ENERGY TO ELECTRICAL ENERGY. THE DEVICE HAS HIGH SPECIFIC POWER BOTH ON A VOLUME AND WEIGHT BASIS, HIGH CONVERSION EFFICIENCY WHICH IS INDEPENDENT OF SIZE, AND NO MOVING PARTS WHICH IMPLIES POTENTIALLY HIGH RELIABILITY. THESE ATTRIBUTES MAKE THE SHE AN ATTRACTIVE DEVICE FOR SDI APPLICATIONS. ALTHOUGH THE PRINC ...

    SBIR Phase II 1987 Department of DefenseMissile Defense Agency
  7. FRACTOGRAPHY OF ADVANCED SILICON NITRIDE MATERIAL FOR TURBINE APPLICATIONS

    SBC: Technology Holding, LLC            Topic: N/A

    SOME CERAMICS HAVE VERY HIGH TEMPERATURE STABILITY AND STRENGTH COMPARED TO STRUCTURAL METALS AND HAVE POTENTIAL TO BE USED UNCOOLED IN ADVANCED GAS TURBINE ENGINES. ONE CANDIDATE FAMILY OF CERAMICS WITH AN ESPECIALLY GOOD COMBINATION OF THERMAL PROPERTIES AND POTENTIAL MECHANICAL PROPERTIES IS SILICON NITRIDE. RECENTLY DEVELOPED ALLOYS OF SILICON NITRIDE LOOK PARTICULARLY PROMISING, BUT REQUIRE F ...

    SBIR Phase I 1987 Department of DefenseNavy
  8. HYPERSONIC RAMJET LEADING EDGE MATERIALS DEVELOPMENT

    SBC: Technology Holding, LLC            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseNavy
  9. NOVEL MULLITE FELT REINFORCED COMPOSITES FOR ADVANCED RADOME APPLICATIONS

    SBC: Technology Holding, LLC            Topic: N/A

    A STABLE LOW, DIELECTRIC CONSTANT, HIGH STRENGTH, A GOOD THERMAL SHOCK RESISTANCE ARE THE MAJOR CRITERIA FOR SELECTING A RADOME MATERIAL. A FIBEROUS MULLITE FELT REINFORCEMENT OFFERS MANY OF THESE PROPERTIES TO MAKE SUITABLE RADOME COMPOSITE MATERIAL. CERAMATEC, INC. PROPOSES TO REINFORCE A MULLITE FELT USING SOL-GEL TECHNIQUE WHICH OFFERS MAJOR ADVANTAGES OVER CONVENTIONAL SLURRY IMPREGNATION OR ...

    SBIR Phase I 1988 Department of DefenseNavy
  10. INJECTION MOLDING OF CERAMIC MATRIX COMPOSITES

    SBC: Technology Holding, LLC            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government