Award Data

This program is designed to development and implement portable friction stir welding for both repair and subassembly of Navy Al structures. This dual use requirement necessitates two different approaches. For example, subassembly implies relatively small structures and a moderate number of components. Further, subassemblies can be welded remote from their final assembly location and moved to, a ...

Advanced Simulation Displays (ASD) proposes to leverage the work already accomplished building seamless wide field of view displays utilizing commerical flat panel display technology. Three of these systems have been build and delivered utilizing fifty inch plasma panels combined to provide a seamless scene for UH-1H simulators. In addition, ASD is under contract to build three channel seamless ...

The technical objectives of this SBIR proposal include the design verification of a frangible composite ILS Glideslope Tower that will maintain existing tolerances and mission performance capabilities. Zephyr Engineering Services’ [ZES’] (formerly All-Tech Solutions, Inc. [ATSI] ), technical approach is based upon the probability demonstrated through Phase I analysis that a qualified, frangib ...

Air Force operations often expose flight crew and support staff to unusual light-dark cycles that causes misalignment of the circadian pacemaker and sleep-wake cycles, resulting in disturbed sleep and impaired waking function. Air Force personnel are also frequently required to remain vigilant, often under conditions of acute or chronic sleep deprivation. An effective countermeasure is required to ...

Autonomous Solutions proposes to increase the speed, accuracy, and overall effectiveness of currently fielded EOD robotic manipulators through 3D visualization and arm automation. ASI will integrate a 3D Flash Ladar camera onto an EOD robotic platform to enable the creation of a 3D model of the object of interest at the user interface. ASI will also implement autonomous arm control which will en ...

Ceramatec and the Idaho National Laboratory will develop a hybrid bi-functional catalyst for the selective production of JP5 range diesel fuels. Standard Fischer Tropsch catalysts and reaction conditions result in a broad distribution of products. Catalyst performance is dependent on both composition and microstructure, and microstructure is the result of processing history. Processing variations ...

A cold plasma fuel processor developed as a fuel processor air breathing JP-8 solid oxide fuel cell APU systems, will be evaluated for suitability for UUV application with JP-10 and Navy logistic oxidizers. The system uses the waste heat from the fuel cell in the reformer, to reduce oxidizer demand and improve overall system efficiency and energy density. The combined JP-10 SOFC system has the po ...

Fuel flexibility is a major advantage of a solid oxide fuel cell as a power generation device. However, present fuel cell anodes do not tolerate the sulfur compounds that are commonly present in both military and commercial liquid fuels. The proposed work will concentrate on developing and demonstrating a sulfur tolerant anode for a solid oxide fuel cell. The performance demonstration will be done ...

A pressure tolerant, neutrally buoyant, high-energy density battery is proposed that utilizes a Li+ conducting, solid-electrolyte separator, LiSICON. The LiSICON ceramic is fabricated using state of the art tape casting methods which allows composite structures of porous and dense layers ~100mm thick. The layered structure increase mechanical strength and decrease interfacial and bulk resistance ...

Compared to conventional power sources, fuel cell systems present such benefits as high efficiency, low emissions, long life, and near silent operation. Of the various fuel cell types, Solid oxide Fuel Cells (SOFC) have a number of advantages in hydrocarbon fuel applications because of their solid-state construction and high temperature operation. Presently, SOFCs operate in the temperature range ...