You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Diamond Technology High Temperature Electronics Radiation Hardened Interceptor Communications

    SBC: AET, Inc.            Topic: MDA07T010

    The goal of this program is to develop high-speed interceptor communications solutions that are hardened to space and nuclear radiation, including high altitude nuclear explosions (HANEs). As part of this program, AET will specifically investigate the use of advanced diamond technology for communications applications. The approach of AET, Inc. is to first identify a communication system architectu ...

    STTR Phase I 2007 Department of DefenseMissile Defense Agency
  2. Ballistic Missile Defense System Innovative Power Storage Devices

    SBC: ENSER Corporation, The            Topic: MDA06026

    The overall objective of the pellet production automation program is to develop alternative methodologies for: 1) precise powder measurement, 2) powder preparation for transfer into the die cavity, 3) uniform powder dispersion. Pellet production is currently a rate limiting step in the production of thermal batteries. The chemical, physical, and mechanical properties of the powders are different e ...

    SBIR Phase I 2007 Department of DefenseMissile Defense Agency
  3. Foveated Imaging and Spectral Discrimination Sensor

    SBC: NEW SPAN OPTO-TECHNOLOGY, INC.            Topic: MDA06054

    The Airborne Laser (ABL) is a key component of the US government's overall ballistic missile defense systems. In an operational scenario, the ABL's sensor system will detect and track enemy's boosting missile, determine its position and destroy it with a high energy laser. The ABL's sensor system also identifies the launch location and predicts the impact location, which is communicated to other a ...

    SBIR Phase I 2007 Department of DefenseMissile Defense Agency
  4. Novel Rapid and Low Damage Mechanical Polishing Method for Low Cost and Volume Manufacturing of 100mm SiC Substrates

    SBC: Sinmat Inc            Topic: MDA06035

    The extremely long and multiple polishing steps represent one of the critical challenges for affordable, volume production of high quality 100 mm SiC wafers. As SiC is relatively chemically inert and mechanically hard, aggressive polishing methods involving very hard particles have been used to achieve high removal rates, but such methods create a high degree of sub-surface damage and scratches. T ...

    SBIR Phase I 2007 Department of DefenseMissile Defense Agency
  5. Cloudwall: Intelligent Consequence Management

    SBC: MODUS OPERANDI, INC.            Topic: MDA05058

    The Missile Defense Agency (MDA) has a responsibility to provide a capability for notifying government and military officials of the potential consequences of falling debris and the primary and secondary effects of ballistic missile engagements over the United States and coalition territories. The MDA needs advanced consequence mitigation (CM) technologies which provide post-intercept debris fall ...

    SBIR Phase II 2007 Department of DefenseMissile Defense Agency
  6. Control and Direct Measurement of Power Density of Laser Beams

    SBC: BEAM ENGINEERING FOR ADVANCED MEASUREMENTS CO.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  7. Microscopic Batteries for Use in MEMs

    SBC: BIPOLAR TECHNOLOGIES            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  8. Large Array Applications for 1-3 Piezoelectric Composite Transducers

    SBC: MAINSTREAM ENGINEERING CORP            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of DefenseMissile Defense Agency
  9. Soft X-Ray Collimating Optics

    SBC: PARALLAX RESEARCH INC            Topic: N/A

    Parallax Research Inc. proposes to develop practical collimating optics for soft x-ray lasers and elemental analyses applications. Although there is no new physics involved in the operation of these optics, the ability to fabricate them economically is a recent innovation. These optics are intended to accept broad energy bandwidths of low energy x-rays diverging from a small source and re-direct t ...

    SBIR Phase II 1996 Department of DefenseMissile Defense Agency
  10. High Rate Sputter Deposition Method for Superconductors

    SBC: Solar Associates            Topic: N/A

    Solar Associates proposes to develop a sputtering process for YBCO superconductors. The energy spectrum of atoms depositing on the substrate will be controlled to an optimum range between 20 and 50 eV. Such energy control will remove the harmful effects of negative oxygen ion bombardment. A sputter deposition system using a surrogate rotating cylindrical magnetron (cf. patent 5,405,517) will be ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government