Award Data

THE INTENT OF THIS WORK IS TO DEVELOP AN ADVANCED ESTIMATED ALGORITHM FOR MANEUVERING TARGET STATE ESTIMATION AND PREDICTION FOR FIRE CONTROL AND TO DEVELOP A DESIGN OF A VHSIC SYSTOLIC ARRAY FOR IMPLEMENTATION OF THE ALGORITHM. THE DESIGN OF THE ALGORITHM WILL CONSIDER MANEUVERING TARGETS INCLUDING AIRCRAFT AND HELICOPTERS. IT WILL INCLUDE THE USE OF ADVANCED SENSOR INFORMATION SUCH AS AN IMAGERY ...

THE DEVELOPMENT OF COMPACT, HIGH ENERGY DENSITY, HIGH POWER (AND POTENTIALLY C.W.) LASER SYSTEMS CAPABLE OF PROPAGATING THROUGH BOTH AIR AND WATER COULD PAVE THE WAY FOR NEXT GENERATION TACTICAL NAVAL SYSTEMS. APPLICATIONS IN OTHER DEFENSE AREAS AS WELL AS A HOST OF COMMERCIAL APPLICATIONS ARE ALSO POSSIBLE WITH THESE TYPES OF SYSTEMS. WE PROPOSE TO PROVIDE A DETAILED PLAN AND DESIGN OF SPECIFIC E ...

CERAMATEC HAS CONDUCTED EXPLORATORY RESEARCH AND DEVELOPMENT ON MONOLITHIC AND COMPOSITE MATERIALS IN THE ZRB2 AND TIB2 SYSTEMS AND HAS OBTAINED VERY ENCOURAGING RESULTS WITH SEVERAL PROPRIETARY COMPOSITIONS/CONSTRUCTIONS. THE AVERAGE STRENGTH OF A BASELINE TIB2 COMPOSITION WAS MEASURED AT 877 MPA (127.3 KSI). COMPOSITE STRUCTURESWITH DISCONTINUOUS REINFORCEMENT HAD STRENGTHS IN THE RANGE 400-600 ...

CURRENT NUMERICAL COMPUTATIONS TO DESCRIBE NUCLEAR GROUND SHOCK ENVIRONMENTS, NUCLEAR CRATER FORMATION, IMPACT DYNAMICS AND PENETRATION MECHANISMS PRESENTLY EMPLOY EULERIAN-BASED FINITE DIFFERENCE CODES BECAUSE OF THEIR ABILITY TO MODEL THE MASS FLUX PHENOMENA IN TRACKING MATERIAL MOVEMENT THROUGH THE DISCRETIZED SPACE. THE FINITE DIFFERENCE CODES SUFFER IN COMPARISON TO FINITE ELEMENT CODES, HOWE ...

A REQUIREMENT EXISTS TO INTEGRATE THE RESULTS OF A HIGH-LEVEL FUNCTIONAL EMULATION OF FINITE STATE MACHINES AND VARIOUS INTELLIGENT SUBSYSTEMS INTO MULTIPLE CO-OPERATING PHYSICAL SUBSYSTEMS THAT PRESERVE THE FUNCTION OF THE EMULATION, INTEGRATE STAND-ALONE COMPONENTS,AND PERFORM THE TASKS ASSOCIATED WITH THE INTELLIGENT WEAPONS PLATFORM AUTOMATION (IWPA) PROGRAM OF ARDEC. IN THIS PROPOSAL DEVELOPM ...

IN REAL-TIME TRACKING AND POST-FLIGHT VIDEOTAPE DATA EXTRACTION APPLICATIONS AN IMPORTANT REQUIREMENT EXISTS FOR RECONSTRUCTING AND ENHANCING IMAGES IN REAL-TIME (60-FIELDS PER SECOND). VARIOUS FILTERING TECHNIQUES MUST BE APPLIED TO THE IMAGES FOR NOISE REMOVAL, EDGE ENHANCEMENT OR OTHER "ORE-PROCESSOR" FUNCTIONS. THESE RECONSTRUCTED AND ENHANCED IMAGES WILL BE USED BY AN AUTOMATIC TRACKING SYSTE ...

THE DEVELOPMENT OF HIGH POWER, LOW IMPEDANCE, LIGHTWEIGHT ENERGY STORAGE TRANSMISSION LINES FOR PULSE-POWER APPLICATIONS IS CRUCIAL FORSMALLER, LIGHTWEIGHT, SPACE-BASED, PULSE-POWER SYSTEMS. DEVELOPMENT OF HIGH DIELECTRIC ENERGY STORAGE LINE TECHNOLOGY WOULD GREATLY REDUCETHE SIZE, WEIGHT, AND COMPLEXITY OF PULSE POWER SYSTEMS UTILIZING THESE TYPES OF COMPONENTS. EFFICIENT TRANSPORT OF 400KV, 100K ...

POLYMERIC OR CERAMIC INSULATORS CONVENTIONALLY ARE BEING USED IN HIGH VOLTAGE PULSED SYSTEMS. NEW APPROACHES ARE NEEDED THAT WOULD REDUCE INSULATORS RING THICKNESSES AND INCREASE CORRESPONDING GRADING RINGS FLASHOVER VOLTAGE. SUCH AN APPROACH WOULD POSSESS IN COMPARISON TO CONVENTIONAL INSULATORS: HIGHER SURFACE FLASHOVER FIELD STRENGTH; SMALLER PHYSICAL DIMENSIONS FOR EQUIVALENT VOLTAGE HOLDOFF; ...

THE NAVY IS DEVELOPING METHODS TO DETERMINE THE SIZE AND TYPE OF DEFECTS IN HELICOPTER GEARBOXES. WITH THIS KNOWLEDGE A BETTER UNDERSTANDING OF THE FATIGUE-CRACK PROPAGATION CHARACTERISTICS OF THE GEARS AND BEARINGS WILL BE POSSIBLE AND ENHANCE THE ACCURACY IN PREDICTING THE FATIGUE LIFE. THE PURPOSE OF THIS PROPOSAL IS TO UNDERTAKE THIS STEP BY INVESTIGATING THE THREE-DIMENSIONAL STRESS DISTRIBUT ...

THE OVERALL OBJECTIVE OF THIS PROJECT IS TO DEMONSTRATE THE SUCCESSFUL FABRICATION AND DENSIFICATION OF CERAMIC MATRIX COMPOSITES FORMED BY INJECTION MOLDING. TO ACCOMPLISH THIS OBJECTIVE, A DESIGNED TEST MATRIX WILL BE DEVELOPED THAT WILL SYSTEMATICALLY INVESTIGATE THE KEY INJECTION MOLDING AND DEBINDING PARAMETERS SUCH AS BINDER COMPOSITION, SOLIDS RATIO, MOLDING CONDITIONS, DEBINDING CONDITIONS ...