List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Versatile Nanofabrication Technology for Polymer / Inorganic Composite Proton Exchange Membranes

    SBC: Engi-Mat Co.            Topic: N/A

    The goal of the proposed research is to demonstrate that MCT's proprietary NanomizerT technology can be used to prepare nanocomposites films that provide a performance advantage over current composites being targeted at the proton exchange membrane fuelcell (PEMFC) market. Nanocomposite membranes are expected to play a major role in overcoming the following technical challenges associated with the ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  2. Enhanced Tropospheric Effects Compensation System

    SBC: PROPAGATION RESEARCH ASSOCIATES, INC.            Topic: N/A

    Propagation Research Associates (PRA) introduces an innovative system that willcorrect angle of arrival error for radars tracking long range, low elevation targets.The correction improvement will be an order of magnitude improvement over existingmodel based measurements and will extend time-lines for Ballistic Missile Defenseradars. The Enhanced Tropospheric Error Compensation (ETEC) System is pr ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  3. Fiber-Optic Raman Analysis for Composites and Solid Rocket Motors

    SBC: PROCESS INSTRUMENTS, INC.            Topic: N/A

    We propose developing a compact, optical fiber-based Raman scattering instrument for rapid, in-situ analysis of composites, solid rocket motors, and propellants. The instrument will incorporate diode laser-based, full-spectrum Raman scattering forcontinuous in-situ remote monitoring of the composite and propellant chemistry. Narrow well defined Raman peaks and lack of sample preparation requirem ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  4. HIGH POWER LOW IMPEDANCE LIGHT WEIGHT TRANSMISSION LINES

    SBC: Tetra Corporation            Topic: N/A

    THE DEVELOPMENT OF HIGH POWER, LOW IMPEDANCE, LIGHTWEIGHT ENERGY STORAGE TRANSMISSION LINES FOR PULSE-POWER APPLICATIONS IS CRUCIAL FORSMALLER, LIGHTWEIGHT, SPACE-BASED, PULSE-POWER SYSTEMS. DEVELOPMENT OF HIGH DIELECTRIC ENERGY STORAGE LINE TECHNOLOGY WOULD GREATLY REDUCETHE SIZE, WEIGHT, AND COMPLEXITY OF PULSE POWER SYSTEMS UTILIZING THESE TYPES OF COMPONENTS. EFFICIENT TRANSPORT OF 400KV, 100K ...

    SBIR Phase II 1989 Department of DefenseMissile Defense Agency
  5. HIGH POWER SHORT PULSE BATTERY/CAPACITOR

    SBC: ERNEST MEADOWS INDUSTRIAL DESIGN            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of DefenseMissile Defense Agency
  6. HIGH TEMPERATURE SUPERCONDUCTORS WITH IMPROVED CURRENT DENSITIES

    SBC: Cryopower Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of DefenseMissile Defense Agency
  7. Large Space Optics Alignment Sensor

    SBC: Kestrel Corporation            Topic: N/A

    Under this Phase I SBIR Kestrel Corporation proposes to demonstrate the advantages of a novel optical technique for measuring wavefront aberrations as a means for aligning large, segmented, space telescopes such as those that might be employed in a SpaceBased Laser (SBL) Weapon system. The same technology has applications as a wavefront sensor for determining aberrations in the transmitted beam. ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  8. MEGAVOLT MEGAHERTZ PULSE GENERATOR TECHNOLOGY

    SBC: Tetra Corporation            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of DefenseMissile Defense Agency
  9. MICROSTACK INSULATOR FOR HIGH VOLTAGE PULSED SYSTEMS

    SBC: Tetra Corporation            Topic: N/A

    POLYMERIC OR CERAMIC INSULATORS CONVENTIONALLY ARE BEING USED IN HIGH VOLTAGE PULSED SYSTEMS. NEW APPROACHES ARE NEEDED THAT WOULD REDUCE INSULATORS RING THICKNESSES AND INCREASE CORRESPONDING GRADING RINGS FLASHOVER VOLTAGE. SUCH AN APPROACH WOULD POSSESS IN COMPARISON TO CONVENTIONAL INSULATORS: HIGHER SURFACE FLASHOVER FIELD STRENGTH; SMALLER PHYSICAL DIMENSIONS FOR EQUIVALENT VOLTAGE HOLDOFF; ...

    SBIR Phase II 1989 Department of DefenseMissile Defense Agency
  10. Nano-Powder Dispersions via Liquid Combustion Vapor Condensation

    SBC: Engi-Mat Co.            Topic: N/A

    This Phase II project is proposed to further develop and commercialize MicroCoating Technologies' NanoMiser technology for the production of high quality nanopowders. Phase I has demonstrated a novel, low-cost method able to produce a variety ofnanopowders of tailored size and composition. The results from Phase I have established a solid ground for this Phase II plan, which will focus on produc ...

    SBIR Phase II 2001 Department of DefenseMissile Defense Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government