Award Data

The vision is to provide decision-makers with effective, fast, and inexpensive analysis tools to answer "What-If" and "What-Should" questions about manufacturing systems. Value Stream Mapping (VSM) is a modeling methodology with widespread contemporary use in manufacturing, and our strategy is to start with VSM as a deployment beachhead for the eventual deployment of a more generic manufacturing s ...

The goal of the proposed research is to demonstrate that MCT's proprietary NanomizerT technology can be used to prepare nanocomposites films that provide a performance advantage over current composites being targeted at the proton exchange membrane fuelcell (PEMFC) market. Nanocomposite membranes are expected to play a major role in overcoming the following technical challenges associated with the ...

Propagation Research Associates (PRA) introduces an innovative system that willcorrect angle of arrival error for radars tracking long range, low elevation targets.The correction improvement will be an order of magnitude improvement over existingmodel based measurements and will extend time-lines for Ballistic Missile Defenseradars. The Enhanced Tropospheric Error Compensation (ETEC) System is pr ...

We propose developing a compact, optical fiber-based Raman scattering instrument for rapid, in-situ analysis of composites, solid rocket motors, and propellants. The instrument will incorporate diode laser-based, full-spectrum Raman scattering forcontinuous in-situ remote monitoring of the composite and propellant chemistry. Narrow well defined Raman peaks and lack of sample preparation requirem ...

The US Missile Defense Agency is seeking to develop innovative architectures and/or high temperature electronics for increasing the temperature capability of actuators used with proportionally controlled valves/thrusters. Solid propellant exhaust gases are commonly 2,000-4,000F while the actuator to valve/thruster interface commonly must be limited to less than 200-300F. This relatively low temp ...

THE DEVELOPMENT OF HIGH POWER, LOW IMPEDANCE, LIGHTWEIGHT ENERGY STORAGE TRANSMISSION LINES FOR PULSE-POWER APPLICATIONS IS CRUCIAL FORSMALLER, LIGHTWEIGHT, SPACE-BASED, PULSE-POWER SYSTEMS. DEVELOPMENT OF HIGH DIELECTRIC ENERGY STORAGE LINE TECHNOLOGY WOULD GREATLY REDUCETHE SIZE, WEIGHT, AND COMPLEXITY OF PULSE POWER SYSTEMS UTILIZING THESE TYPES OF COMPONENTS. EFFICIENT TRANSPORT OF 400KV, 100K ...

N/A

N/A

Under this Phase I SBIR Kestrel Corporation proposes to demonstrate the advantages of a novel optical technique for measuring wavefront aberrations as a means for aligning large, segmented, space telescopes such as those that might be employed in a SpaceBased Laser (SBL) Weapon system. The same technology has applications as a wavefront sensor for determining aberrations in the transmitted beam. ...

A program is proposed to investigate and demonstrate an innovative, low cost approach to the production of quartz/phenolic (Q/P) heatshields such as those presently used on the Theater High Altitude Area Defense (THAAD) System. These heatshields arecurrently fabricated with a tape wrap process using a woven quartz fabric impregnated with phenolic resin. Through the novel use of placed fiber tech ...