Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Advanced Intrusion Detection Techniques

    SBC: Reaction Engineering International            Topic: N/A

    The Army Chemical Stockpile Disposal Program (CSDP) is charged withdestroying the nation's deteriorating stockpile of highly toxic chemicalagents and munitions. This has proven to be a technically challenging,lengthy (20 year projected effort) and costly ($15 billion and increasing)endeavor. Incineration technology is the basis for most of the chemicaldemilitarization activities. Improved incinera ...

    SBIR Phase II 2001 Department of DefenseArmy
  2. Advanced Materials and Processing Methods for CMC Ducts

    SBC: Thor Technologies, Inc.            Topic: N/A

    Continuous fiber-reinforced ceramic composites (CFCCs) are inherently wear and oxidation resistant, retain strength at higher temperatures and have lower specific densities than competing metal systems. The hot sections of gas turbine engines and relateddevices are exposed to aggressive gaseous species at high temperature. Because of their thermochemical stability and oxidation resistance, continu ...

    SBIR Phase I 2001 Department of DefenseArmy
  3. Advanced Electrode Manufacturing for High Energy and High Power Batteries

    SBC: Storagenergy Technologies, Inc.            Topic: A17020

    This small business innovation research (SBIR) proposal addresses the solvent-related safety issue and limited energy and power densities of the current lithium ion battery (LIB) technology. Storagenergy Technologies Inc. proposes to develop advanced electrode manufacturing process for a multi-layer electrode LIB cell having ordered graded pore structure. The proposed process eliminates the use ...

    SBIR Phase I 2017 Department of DefenseArmy
  4. All Solid-State Batteries Based on Ceramic Separators

    SBC: Storagenergy Technologies, Inc.            Topic: A17025

    All Solid-State Battery, by replacing liquid electrolyte with solvent-free solid electrolyte (SE) which is anticipated to preclude dendrite formation, has the promise to ultimately resolve the safety issues of lithium ion batteries. Storagenergy Technologies Inc. propose a superior all solid-state battery based on lithium anode, ceramic membranes and advanced composite cathode. If successful, the ...

    SBIR Phase I 2017 Department of DefenseArmy
  5. AN INTEGRATED APPROACH TO THE CORRELATION OF INSENSITIVE MUNITIONS TESTS TO CARD GAP VALUES

    SBC: TPL, INC.            Topic: N/A

    CARD GAP TESTS ARE THE HAZARD STANDARDS BY WHICH ENERGETIC MATERIALS ARE CLASSIFIED. THE USE OF INSENSITIVE MUNITIONS REQUIRES PERFORMANCE RESPONSE INFORMATION TO SENSITIVITY TESTS SUCH AS BULLET/ FRAGMENT IMPACT AND SHOCK IMPACT. NO CORRELATION METHODS EXIST BETWEEN CARD GAP TESTS AND SENSITIVITY TESTS, RESULTING IN THE NEED TO CONDUCT EXTENSIVE EXPERIMENTAL INVESTIGATIONS. IT IS HYPOTHESIZED THA ...

    SBIR Phase I 1989 Department of DefenseArmy
  6. An Ultra-Wideband Antenna Built Into a Parachute

    SBC: FARR RESEARCH, INC.            Topic: N/A

    While explosive munitions are quite effective at causing damage due to blast and fragments, their radius of damage is somewhat limited. We seek here to introduce a method of increasing the damage radius by adding an RF weapon system to the munition,consisting of an impulse source and a broadband antenna. By this technique, additional damage will be created in the area by upsetting computers and co ...

    SBIR Phase I 2001 Department of DefenseArmy
  7. Automated Tuning and Calibration of By-Wire Vehicles for Automated Driving Functions

    SBC: AUTONOMOUS SOLUTIONS, INC.            Topic: A16134

    The current process for setup and configuration of autonomous ground vehicles is a time consuming process which can often require a skilled engineer. This process includes measuring key sensor parameters and also tuning control parameters so the vehicle will operate properly. This proposed research will develop techniques for self-calibration of sensor parameters and automatic tuning of control sy ...

    SBIR Phase I 2017 Department of DefenseArmy
  8. Electromagnetic Modeling of Complex Structures

    SBC: ADVANCED ELECTROMAGNETICS            Topic: N/A

    A System-Level Modeling Framework for electromagnetic modeling is proposed. The heart of the Framework is a rule-based, whole-object conversion process that takes Computer Aided Design (CAD) geometry and material data and transforms it into valid,electromagnetic geometry and material modeling elements. The CAD Converter creates an

    SBIR Phase I 2001 Department of DefenseArmy
  9. Electromagnetic Modeling of Complex Structures

    SBC: ADVANCED ELECTROMAGNETICS            Topic: N/A

    This work will design, develop, and implement a system-level electromagnetic simulation framework that increases the productivity of all participants in an EM analysis of a complex system by providing a collaborative engineering environment in which theparticipants easily construct simulation models, share and re-use data, create computational capabilities that utilize a suite of EM modeling tools ...

    SBIR Phase II 2001 Department of DefenseArmy
  10. Fiber-Optic Raman Analysis for Composites and Solid Rocket Motors

    SBC: PROCESS INSTRUMENTS, INC.            Topic: N/A

    We propose developing a compact, optical fiber-based Raman scattering instrument for rapid, in-situ analysis of composites, solid rocket motors, and propellants. The instrument will incorporate diode laser-based, full-spectrum Raman scattering forcontinuous in-situ remote monitoring of the composite and propellant chemistry. Narrow well defined Raman peaks and lack of sample preparation requirem ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government