Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Advanced Metal Powder Manufacture for MLCC Applications

    SBC: NANOCHEM RESEARCH, INC.            Topic: N/A

    Sensors, capacitors, and conducting features such as resistors and capacitors on circuit boards are produced from metal and ceramic powders 1-12 These powders are manufactured by liquid phase precipitation routes which often start with reduction of metal salts or by solid-state routes where solid reactants are mixed, heated and then milled. The solid-state processing is generally repeated several ...

    SBIR Phase II 1998 Department of DefenseMissile Defense Agency
  2. Atmospheric Turbulence Measurement System

    SBC: Kestrel Corporation            Topic: N/A

    In this Phase I SBIR a totally new, non intrusive optical method for making fundamental atmospheric turbulence measurements will be investigated. A correlation between the movement of a pair of thin beams is used to define the inner and outer scale size independent of any assumed turbulence model and to calculate the index of refraction coefficient. During the effort, extensions will be made to th ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  3. Embedded Sensors via Laser Engineered Net Shaping

    SBC: OPTOMEC, INC.            Topic: N/A

    Optomec Design Company proposes to use Laser Engineered Net Shaping (LENSTM), a Rapid Prototyping and Manufacturing (RP&M) technology currently under development at Sandia National Laboratories (SNL), as a new method for integrating instrumentation (e.g., embedded sensors) into metal structural components. SNL has demonstrated the ability of the LENSTM technology to produce near net shape stainles ...

    SBIR Phase II 1998 Department of DefenseMissile Defense Agency
  4. Fiber-Optic Raman Analysis for Composites and Solid Rocket Motors

    SBC: PROCESS INSTRUMENTS, INC.            Topic: N/A

    We propose developing a compact, optical fiber-based Raman scattering instrument for rapid, in-situ analysis of composites, solid rocket motors, and propellants. The instrument will incorporate diode laser-based, full-spectrum Raman scattering forcontinuous in-situ remote monitoring of the composite and propellant chemistry. Narrow well defined Raman peaks and lack of sample preparation requirem ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  5. Formation of Hollow Microspheres by Spray Pyrolysis

    SBC: NANOCHEM RESEARCH, INC.            Topic: N/A

    Wireless portable communications is a multi-billion dollar industry that demands ever-faster and smaller cellular devices. The heart of theses devices is the multi-chip module (MCM) which connects the electrical communication components to another, and governs both the speed of communication signals between the components and the size of the portable device. Futrure generations of portable devices ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  6. High Performance Actuators for Solid Propulsion Control Systems

    SBC: Electric Drivetrain Technologies LLC            Topic: MDA16010

    The US Missile Defense Agency is seeking to develop innovative architectures and/or high temperature electronics for increasing the temperature capability of actuators used with proportionally controlled valves/thrusters. Solid propellant exhaust gases are commonly 2,000-4,000F while the actuator to valve/thruster interface commonly must be limited to less than 200-300F. This relatively low temp ...

    SBIR Phase I 2017 Department of DefenseMissile Defense Agency
  7. High Performance Materials for Integrated Capacitance

    SBC: TPL, INC.            Topic: N/A

    Current trends towards miniaturization and increased performance of consumer electronics are requiring higher component densities in printed circuit boards. Microprocessors speeds are currently limited by inefficiencies in interconnects between the processor and supporting discrete devices such as capacitors. Further improvements in speed will required the integration of capacitors into the PC boa ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  8. HIGH POWER LOW IMPEDANCE LIGHT WEIGHT TRANSMISSION LINES

    SBC: Tetra Corporation            Topic: N/A

    THE DEVELOPMENT OF HIGH POWER, LOW IMPEDANCE, LIGHTWEIGHT ENERGY STORAGE TRANSMISSION LINES FOR PULSE-POWER APPLICATIONS IS CRUCIAL FORSMALLER, LIGHTWEIGHT, SPACE-BASED, PULSE-POWER SYSTEMS. DEVELOPMENT OF HIGH DIELECTRIC ENERGY STORAGE LINE TECHNOLOGY WOULD GREATLY REDUCETHE SIZE, WEIGHT, AND COMPLEXITY OF PULSE POWER SYSTEMS UTILIZING THESE TYPES OF COMPONENTS. EFFICIENT TRANSPORT OF 400KV, 100K ...

    SBIR Phase II 1989 Department of DefenseMissile Defense Agency
  9. HIGH POWER SHORT PULSE BATTERY/CAPACITOR

    SBC: ERNEST MEADOWS INDUSTRIAL DESIGN            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of DefenseMissile Defense Agency
  10. HIGH TEMPERATURE SUPERCONDUCTORS WITH IMPROVED CURRENT DENSITIES

    SBC: Cryopower Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government