Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. A Collaborative Environment for Data Driven Condition Based Maintenance

    SBC: MANAGEMENT SCIENCES INC            Topic: MDA03029

    This Phase II SBIR proposal presents a new platform for development, validation, and deployment of health and status assessment and decision support applications. At the core of this platform is MSI’s Collaborative Bayesian Application Engineering Environment (CBAEE) for developing models supporting signature recognition, condition assessment, and decision support. This Collaborative Engineering ...

    SBIR Phase II 2005 Department of DefenseMissile Defense Agency
  2. A Modular Composite Gimbal and Control Architecture for Improved Precision and Disturbance Rejection

    SBC: SEQUOIA TECHNOLOGIES, INC.            Topic: MDA04072

    A high performance composite gimbal development and demonstration is proposed. This effort will build upon the successful Phase I demonstration of a 3-axis lightweight composite gimbal with precision stabilization and pointing capabilities. Key technology advances include higher overall stiffness through composite fabrication and bearing improvements, an upgraded sensing and processing architectur ...

    SBIR Phase II 2005 Department of DefenseMissile Defense Agency
  3. AR Coated Zinc Sulfide Advanced Window Technology

    SBC: VICUS TECHNOLOGIES, LLC            Topic: MDA04114

    Multispectral zinc sulfide (ZnS) has been identified as a candidate seeker window material for defensive interceptor applications. Zinc sulfide is currently being tested for thermophysical and optical properties to confirm its performance and validate analytical predictions. The ZnS currently being tested does not contain an antireflective (AR) coating. Due to the increase in spectral bandwidth fo ...

    SBIR Phase I 2005 Department of DefenseMissile Defense Agency
  4. Auto-Correcting Inertial Measurement Unit

    SBC: A-TECH CORPORATION            Topic: MDA04130

    DoD space surveillance and weapons systems require highly accurate inertial knowledge in absolute location and angular orientation. Current technologies providing these functions are not integrated into a single, light-weight, low-cost, power-efficient instrument. Applied Technology Associates (ATA) proposes to further develop its innovative and patented optical inertial reference unit technolog ...

    SBIR Phase I 2005 Department of DefenseMissile Defense Agency
  5. Design Development of an Advanced Composite Interceptor Nosecone for KEI

    SBC: Fiber Materials, Inc.            Topic: MDA04111

    The proposed nosecone development effort will investigate application of the following component technologies to a ground base interceptor deployable nosecone for KEI: [1] an advanced ceramic resin matrix for the thermal protection system, [2] a low-shock nosecone separation system, [3] a lightweight composite assembly configuration and [4] integration of lightning/EMI shielding into the composite ...

    SBIR Phase I 2005 Department of DefenseMissile Defense Agency
  6. Development of Zinc Sulfide Seeker Window Material

    SBC: VICUS TECHNOLOGIES, LLC            Topic: MDA04053

    Ground based interceptors can benefit significantly from the use of a dual color focal planes and wideband seekers for improved target acquisition and target discrimination. Zinc sulfide has been under evaluation as a replacement window for the THAAD seeker system to replace the current sapphire window. Zinc sulfide presents a wideband capability and will result in a significant system cost reduct ...

    SBIR Phase II 2005 Department of DefenseMissile Defense Agency
  7. Fiber-Optic Raman Analysis for Composites and Solid Rocket Motors

    SBC: PROCESS INSTRUMENTS, INC.            Topic: N/A

    We propose developing a compact, optical fiber-based Raman scattering instrument for rapid, in-situ analysis of composites, solid rocket motors, and propellants. The instrument will incorporate diode laser-based, full-spectrum Raman scattering forcontinuous in-situ remote monitoring of the composite and propellant chemistry. Narrow well defined Raman peaks and lack of sample preparation requirem ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  8. High Performance Actuators for Solid Propulsion Control Systems

    SBC: Electric Drivetrain Technologies LLC            Topic: MDA16010

    The US Missile Defense Agency is seeking to develop innovative architectures and/or high temperature electronics for increasing the temperature capability of actuators used with proportionally controlled valves/thrusters. Solid propellant exhaust gases are commonly 2,000-4,000F while the actuator to valve/thruster interface commonly must be limited to less than 200-300F. This relatively low temp ...

    SBIR Phase I 2017 Department of DefenseMissile Defense Agency
  9. HIGH POWER LOW IMPEDANCE LIGHT WEIGHT TRANSMISSION LINES

    SBC: Tetra Corporation            Topic: N/A

    THE DEVELOPMENT OF HIGH POWER, LOW IMPEDANCE, LIGHTWEIGHT ENERGY STORAGE TRANSMISSION LINES FOR PULSE-POWER APPLICATIONS IS CRUCIAL FORSMALLER, LIGHTWEIGHT, SPACE-BASED, PULSE-POWER SYSTEMS. DEVELOPMENT OF HIGH DIELECTRIC ENERGY STORAGE LINE TECHNOLOGY WOULD GREATLY REDUCETHE SIZE, WEIGHT, AND COMPLEXITY OF PULSE POWER SYSTEMS UTILIZING THESE TYPES OF COMPONENTS. EFFICIENT TRANSPORT OF 400KV, 100K ...

    SBIR Phase II 1989 Department of DefenseMissile Defense Agency
  10. HIGH POWER SHORT PULSE BATTERY/CAPACITOR

    SBC: ERNEST MEADOWS INDUSTRIAL DESIGN            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government