Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Advanced LADAR Modeling

    SBC: TAU TECHNOLOGIES LLC            Topic: MDA08051

    The Airborne Laser (ABL) program has a need to evaluate the potential performance trade-offs for different Laser Ranger (or LADAR) systems, to measure the size, trajectory and plume characteristics of ballistic missiles at long ranges. The program office will need to independently examine, during the procurement evaluation process, the predicted performance of various proposed LADAR system config ...

    SBIR Phase I 2009 Department of DefenseMissile Defense Agency
  2. Compact High Power Microwave Payloads

    SBC: KTECH CORP.            Topic: MDA08047

    The overall objective of this proposal is to develop the necessary components and to design and build a compact pulsed power system for the Missile Defense Agency that will produce little or no debris when activated. In particular, the energy requirements for the HPM payload appear to require an explosive-driven magnetic flux compression generator or one of it derivatives to provide the energy re ...

    SBIR Phase I 2009 Department of DefenseMissile Defense Agency
  3. DRG/ARS Single-Axis Sensor (DASS)

    SBC: A-TECH CORPORATION            Topic: MDA07008

    Proposed Missile Defense Agency (MDA) systems, such as the Space Tracking and Surveillance System (STSS), require high precision gyroscopes for high-resolution Line of Sight (LOS) stabilization, inertial attitude knowledge (IAK), and other high accuracy, space-based acquisition, pointing and tracking (APT) systems. To achieve these mission objectives, MDA is very interested in the development of c ...

    SBIR Phase II 2009 Department of DefenseMissile Defense Agency
  4. Fiber-Optic Raman Analysis for Composites and Solid Rocket Motors

    SBC: PROCESS INSTRUMENTS, INC.            Topic: N/A

    We propose developing a compact, optical fiber-based Raman scattering instrument for rapid, in-situ analysis of composites, solid rocket motors, and propellants. The instrument will incorporate diode laser-based, full-spectrum Raman scattering forcontinuous in-situ remote monitoring of the composite and propellant chemistry. Narrow well defined Raman peaks and lack of sample preparation requirem ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  5. High Performance Actuators for Solid Propulsion Control Systems

    SBC: Electric Drivetrain Technologies LLC            Topic: MDA16010

    The US Missile Defense Agency is seeking to develop innovative architectures and/or high temperature electronics for increasing the temperature capability of actuators used with proportionally controlled valves/thrusters. Solid propellant exhaust gases are commonly 2,000-4,000F while the actuator to valve/thruster interface commonly must be limited to less than 200-300F. This relatively low temp ...

    SBIR Phase I 2017 Department of DefenseMissile Defense Agency
  6. HIGH POWER LOW IMPEDANCE LIGHT WEIGHT TRANSMISSION LINES

    SBC: Tetra Corporation            Topic: N/A

    THE DEVELOPMENT OF HIGH POWER, LOW IMPEDANCE, LIGHTWEIGHT ENERGY STORAGE TRANSMISSION LINES FOR PULSE-POWER APPLICATIONS IS CRUCIAL FORSMALLER, LIGHTWEIGHT, SPACE-BASED, PULSE-POWER SYSTEMS. DEVELOPMENT OF HIGH DIELECTRIC ENERGY STORAGE LINE TECHNOLOGY WOULD GREATLY REDUCETHE SIZE, WEIGHT, AND COMPLEXITY OF PULSE POWER SYSTEMS UTILIZING THESE TYPES OF COMPONENTS. EFFICIENT TRANSPORT OF 400KV, 100K ...

    SBIR Phase II 1989 Department of DefenseMissile Defense Agency
  7. HIGH POWER SHORT PULSE BATTERY/CAPACITOR

    SBC: ERNEST MEADOWS INDUSTRIAL DESIGN            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of DefenseMissile Defense Agency
  8. HIGH TEMPERATURE SUPERCONDUCTORS WITH IMPROVED CURRENT DENSITIES

    SBC: Cryopower Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of DefenseMissile Defense Agency
  9. Large Space Optics Alignment Sensor

    SBC: Kestrel Corporation            Topic: N/A

    Under this Phase I SBIR Kestrel Corporation proposes to demonstrate the advantages of a novel optical technique for measuring wavefront aberrations as a means for aligning large, segmented, space telescopes such as those that might be employed in a SpaceBased Laser (SBL) Weapon system. The same technology has applications as a wavefront sensor for determining aberrations in the transmitted beam. ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  10. Low Cost Fabrication of THAAD Heatshields Using Placed Fiber Manufacturing

    SBC: Fiber Materials, Inc.            Topic: N/A

    A program is proposed to investigate and demonstrate an innovative, low cost approach to the production of quartz/phenolic (Q/P) heatshields such as those presently used on the Theater High Altitude Area Defense (THAAD) System. These heatshields arecurrently fabricated with a tape wrap process using a woven quartz fabric impregnated with phenolic resin. Through the novel use of placed fiber tech ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government